Uniden FP 1100 Handleiding

Bekijk gratis de handleiding van Uniden FP 1100 (3 pagina’s), behorend tot de categorie Telefoon. Deze gids werd als nuttig beoordeeld door 108 mensen en kreeg gemiddeld 4.3 sterren uit 3 reviews. Heb je een vraag over Uniden FP 1100 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FP1100

Corded Telephone

Owner’s Manual

Visit the our website at:

www.uniden.com.au

for Australian model or

www.uniden.co.nz

for New Zealand model

(c) 2009 Uniden Australia Pty Limited/

Uniden New Zealand Limited

Printed in PRC

Important Safety Information

Introduction

Your telephone is designed to give you exibility

in use and high quality performance. To get the

most from your new telephone, we suggest

that you take a few minutes right now to read

through this instruction manual.

CAUTION: When using telephone

equipment, there are basic safety

instructions that should always be

followed. Refer to the IMPORTANT

SAFETY INFORMATION provided

with this product and save them for

future reference.

NOTE: This phone uses Touch-Tone

dialing service only. For this telephone

to function properly, you must use

Touch-Tone service available through

your local telephone company.

Hearing Aid Compatibility (HAC).

Before You Begin

Important Installation

Information

•Neverinstalltelephonewiringduringa

lightning storm.

•Neverinstalltelephonejacksinwet

locationsunlessthejackisspecically

designed for wet locations.

•Nevertouchnon-insulatedtelephone

wires or terminals, unless the telephone

line has been disconnected at the network

interface.

•Usecautionwheninstallingormodifying

telephone lines.

•Temporarilydisconnectanyequipment

connected to the phone such as faxes,

other phones, or modems.

Handset Layout

Redial

Button

RINGER

Volume

Switch

Flash

Button

Earpiece

Volume

Switch

Installing the Phone

Your telephone should be placed on a level

surface such as a desk or table top, or you can

mount it on a wall. A desktop/wall mounting

pedestal is built into the base of the phone.

1.SlidetheRINGERvolumeswitch(onthe

handset) to the desired volume.

2. Set the earpiece volume switch (on the

handset) to the desired listening volume.

3. Plug the telephone line cord into a modular

wallphonejack.

4. Store the extra cord in the grooves in the

base.

Wall Mount Installation

Your telephone may also be mounted on a wall

plate (not included).

NOTE: To prevent the handset from

falling out of the cradle while the

phone is hanging on the wall, you

must reverse the handset hook

(located on the base).

1. Push the handset hook up and out of the slot

on the base with your thumb, rotate the hook

180°, and replace it back in the slot.

2. Plug the telephone line cord into a modular

wallphonejack.

3. Slip the mounting holes on the base over

thewallplatepostsandrmlyslidetheunit

down into place (wall plate not included).

WARNING: TO

PREVENT FIRE

OR ELECTRICAL

SHOCK HAZARD,

DO NOT EXPOSE

THIS PRODUCT

TO RAIN OR

MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

Product specificaties