Toa HY-PF7W Handleiding
Toa
Niet gecategoriseerd
HY-PF7W
Bekijk gratis de handleiding van Toa HY-PF7W (4 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 172 mensen en kreeg gemiddeld 3.8 sterren uit 86.5 reviews. Heb je een vraag over Toa HY-PF7W of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4

INSTALLATION MANUAL
SPEAKER RIGGING FRAMES HY-PF7B
HY-PF7W
Thank you for purchasing TOA’s Speaker Rigging Frame.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1. SAFETY PRECAUTIONS
• Beforeinstallationoruse,besuretocarefullyread
all the instructions in this section for correct and
safe operation.
• Besuretofollowalltheprecautionaryinstructions
in this section, which contain important warnings
and/orcautionsregardingsafety.
• After reading, keep this manual handy for future
reference.
• Referallinstallationworktothedealerfromwhom
the speaker was purchased. Installation for ying
requires extensive technical knowledge and
experience. The speaker may fall off if incorrectly
installed,resultinginpossiblepersonalinjury.
• FlyingPrecautions
Besuretofollowtheinstructionsbelow.Otherwise,
the suspension wires or belts may be off or snap
and the speaker may fall off, causing personal
injury.
· Check to conrm that the suspension wires and
beltsarestrongenoughtowithstandthespeaker
load.
· Theconnectorsofthesuspensionwiresandbelts
mustbesecurelylinkedwiththoseofthespeaker.
· All parts and components (such as enclosures,
metalpieces,andscrews)mustbefreefromany
deformation,crack,andcorrosion.
· Besuretousescrewssuppliedwiththeoptional
yinghardwarewheninstallingthespeakerusing
suchhardware.
• Install the speaker only in a location that can
structurally supporttheweight ofthespeakerand
the mounting bracket. Doing otherwise may result
in the speaker falling down and causing personal
injuryand/orpropertydamage.
• Sincetheframeisdesignedforindooruse,donot
install it outdoors. If installed outdoors, the aging
of parts causes the speaker to fall off, resulting in
personal injury. Also, when it gets wet with rain,
thereisadangerofelectricshock.
• Owing to the speaker’s size and weight, be sure
that at least two persons are available to install the
speaker. Failure to do so could result in personal
injury.
• Donotuseothermethodsthanspeciedtomount
the frame. Extreme force is applied to the frame
andthespeakercouldfalloff,possiblyresultingin
personalinjuries.
• Use nuts and bolts that are appropriate for the
ceiling’sstructureandcomposition.Failuretodoso
may cause the speaker to fall, resulting in material
damageandpossiblepersonalinjury.
• Tighteneachnutandboltsecurely.Ensurethatthe
framehasnoloosejointsafterinstallationtoprevent
accidentsthatcouldresultinpersonalinjury.
• Use the specied speaker in combination. Doing
otherwise may cause the speaker to fall off, resulting
inpersonalinjury.
• Donotmountthespeakerinlocationsexposedto
constantvibration.Theframecanbedamagedby
excessive vibration, potentially causing the speaker
tofall,whichcouldresultinpersonalinjury.
• Avoid installing the speaker in indoor swimming
facilities that are not well ventilated. In such
locations the frame may be vulnerable to corrosion,
eventually allowing the speaker to fall resulting in
personalinjury.
• Avoid touching the frame’s sharp metal edge to
preventinjury.
• Have the frame checked periodically by the shop
fromwhereitwaspurchased.Failuretodosomay
resultincorrosionordamagetotheframethatcould
cause the speaker to fall, possibly causing personal
injury.
Indicatesapotentiallyhazardoussituationwhich,
if mishandled, could result in death or serious
personalinjury.
WARNING
Indicatesapotentiallyhazardoussituationwhich,
ifmishandled,could resultinmoderateorminor
personalinjury,and/orpropertydamage.
CAUTION

2. GENERAL DESCRIPTION
The HY-PF7B and HY-PF7W Speaker rigging frames are used exclusively to suspend the HX-7B or HX-7W Speaker
systemfromthehighceilingindoors.
TheFB-150BorFB-150WSubwoofersystemcanalsobesuspendedusingtheHY-PF7BorHY-PF7WandtheSpeaker
riggingframe’ssuppliedmountingbrackets.
EachofHY-PF7BandHY-PF7WiscapableofsuspendinguptotwoHX-7BorHX-7WspeakersandoneFB-150BorFB-
150W.
3. SUSPENDING FB-150B OR FB-150W
• Owing to the speaker’s size and weight, be sure that at least two
persons are available to install the Speaker rigging frame.
Failuretodosocouldresultinpersonalinjury.
• Tightentheboltssecurely,asinstructedbelow.
Failuretofollowinstructionspreciselycouldresultinafallingspeaker
andpotentialpersonalinjury.
· Ensurethatallboltsaresecurelyinsertedasfarastheirthreadsgo,
then securely fasten each bolt with a nut.
· Tighten all the bolts with the designated tightening torque. For
tightening,useaPhillipsscrewdriver,oropen-orbox-endwrench.
WARNING
FB-150B or FB-150W
Subwoofer system
Subwoofer fixing bracket (accessory)
3
Fix the FB-150B or FB-150W.
Attach the fixing brackets at the 4 positions
on the speaker rigging frame.
Hex head bolt M8 x 40
(with plain washer, accessory)
Tightening torque:
8 N·m
Hex head bolt M8 x 40
(with plain washer, accessory)
Tightening torque:
8 N·m
1
Remove the attached screws.
Note
The removed screws are not used.
2
Nut for M8 (accessory)
Plain washer for M8
(accessory)
Suspension holes
(4 points)
4
Turn the rigging frame/Subwoofer assembly upside down,
then suspend it at 4 points on the rigging frame from the
ceiling using chains, wires, or carabiners.
Note: Prepare chains, wires, or carabiners separately.
When mounting theriggingframetotheSubwoofersystem,placetheriggingframe abovetheSubwoofersystemas
shown below.
(Seep.4,"SUSPENSIONEXAMPLES.")

Owingtothespeaker’ssizeandweight,besurethatatleasttwopersons
are available to install the Speaker rigging frame.
Failuretodosocouldresultinpersonalinjury.
WARNING
4. SUSPENDING HX-7B OR HX-7W
AttachthesuspensionbracketssuppliedwitheachofHX-7BandHX-7Wspeakers,settingthedirectivityanglemodetothe
desiredmodeinadvance.WhensuspendingtwoHX-7BorHX-7Wspeakers,connecttheminadvanceusingtheHY-CN7
SeriesSpeakerconnectionbracket(optional).
Note
Refer to the instruction manual supplied with the HX-7 Series speaker for suspension bracket mounting method and
directivityanglemodemodications,andtotheHY-CN7Seriesinstallationmanualforspeakerconnections.
UptotwoHX-7BorHX-7Wspeakerscanbesuspendedtogether.Onlyverticalsuspensionispossible.
Note
When installingthespeakerstogetherwithTOA’sFB-150B orFB-150WSubwoofersystem,rstperformtheoperations
explainedonthepreviouspage.
Step 1. UsingtheHX-7B’sorHX-7W’ssuspensionandrearbrackets,suspendtheHX-7BorHX-7Wat3pointsofthe
rigging frame.
Step 2. Suspendthespeaker/riggingframeassemblyfromtheceilingusingchainsorwiresandcarabinersattachedto
theriggingframein4places.
Note
TosuspendtheSpeakerriggingframeandHX-7BorHX-7Wspeaker(s),besuretousechains,wires,orcarabiners,
whichshouldbepreparedseparately.
HY-PF7B or HY-PF7W
(suspended at 4 points)
HX-7B or HX-7W
(suspended at 3 points)
Suspension bracket
(supplied with HX-7B or HX-7W)
2
11
1
2
2
2
Rear bracket
1
Product specificaties
Merk: | Toa |
Categorie: | Niet gecategoriseerd |
Model: | HY-PF7W |
Kleur van het product: | Wit |
Gewicht: | 4000 g |
Breedte: | 645 mm |
Diepte: | 472 mm |
Hoogte (max): | 50 mm |
Plaatsing: | Plafond |
Materiaal: | Staal |
Inclusief bouten: | Ja |
Heb je hulp nodig?
Als je hulp nodig hebt met Toa HY-PF7W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Toa
24 Mei 2025
24 Mei 2025
21 Maart 2025
10 December 2024
18 September 2024
3 September 2024
3 September 2024
9 Juli 2024
9 Juli 2024
9 Juli 2024
Handleiding Niet gecategoriseerd
- SPC
- Kendall Howard
- GBC
- Brainstorm
- Doughty
- Laser
- Cabasse
- Abac
- Simmons
- Fannova
- Lumu
- Bomann
- Owon
- Miditech
- Esdec
Nieuwste handleidingen voor Niet gecategoriseerd
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025