TFA 14.2005 Handleiding

Bekijk gratis de handleiding van TFA 14.2005 (1 pagina’s), behorend tot de categorie Thermometer. Deze gids werd als nuttig beoordeeld door 80 mensen en kreeg gemiddeld 4.2 sterren uit 9 reviews. Heb je een vraag over TFA 14.2005 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Operating Instructions for Alcoholmeter

By means of the alcoholmeter, the volume-percentage in an alcohol/water-mixture can be established.

Measuring is to be carried out in a flat bottomed jar of sufficient size, in which case the alcoholometer must

float freely in the liquid.

For this purpose, slowly lower the alcoholmeter into the Iiquid, until the equilibrium of the mass of the glass

body in relation to the mass of the displaced liquid has been achieved. Reading is to be carried out at the

mark of the liquid level. In order to achieve this, bring the eye below the liquid level and read at the

intersection between liquid level and alcoholmeter stem the alcohol contents at the scale.

It is of great importance that the alcoholmeter is immersed in the Iiquid to be measured in an absolutely

clean and dry condition, in order to achieve percise measuring results. In additon, the tempereture of the

liquid to be measured must correspond to the reference temperature of 20 °C of the alcoholmeteter. Any

significant deviation from this temperature will result in wrong indications of the alcoholmeter which have to

be offset by taking correction values into account.

Operating Instructions for Must Gauge

The must gauge can be used to measure the Oechsle content of the unfermented juice.

Measuring is to be carried out in a flat bottomed jar of sufficient size, in which case the Oechsle gauge must

float freely in the liquid.

For this purpose, slowly lower the must gauge into the liquid, until the equilibrium of the mass of the glass

body in relation to the mass of the displaced liquid has been achieved.

It is of great importance that the device is immersed in the liquid to be measured in an absolutely clean and

dry condition, in order to achieve precise measuring results. The reference temperature is 20 °C. In case of

deviations, the percentage values shown in the margin must be added to or subtracted from the measuring

results.

Product specificaties