Taylor 1053 Handleiding

Taylor Keukenweegschaal 1053

Lees hieronder de đź“– handleiding in het Nederlandse voor Taylor 1053 (10 pagina's) in de categorie Keukenweegschaal. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
1
Thank you for purchasing a Taylor® Kitchen Scale. Your Taylor®
scale is an example of superior design and craftsmanship.
Please read this instruction manual carefully before use. Keep
these instructions handy for future reference.
Merci de votre achat d’une balance de cuisine Taylor®.
Votre balance Taylor® est un exemple de design et de
travail supérieurs. Veuillez lire attentivement votre manuel
d’instructions avant d’utiliser l’appareil. Conservez ces
instructions à portée de la main à titre de référence.
Gracias por comprar una báscula de cocina Taylor®. Su báscula
Taylor® es un ejemplo de diseño y mano de obra superiores.
Lea siempre las instrucciones por completo para asegurarse de
disfrutar del beneficio completo de todas las funciones de esta
unidad. Guarde estas instrucciones en un lugar de fácil acceso
para referencia futura.
ELECTRONIC KITCHEN SCALE
BALANCE DE CUISINE ÉLECTRONIQUE
BĂ€SCULA DE COCINA ELECTRĂ“NICA
1053
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL D’INSTRUCCIONES
2
GENERAL WEIGHING OPERATION
1. This scale operates on 1 CR2032 Lithium battery (included). There is a
plastic strip under the Lithium battery cover to prevent battery drain in
shipping. Remove the strip before continuing with these instructions.
2. Place the scale on a hard, level surface.
3. /TARE Press “q” to turn the scale on. The display first shows “ ”, then
zero when it is ready for use. If the display does not show zero, press
“q/TARE” to reset (tare) the scale to zero.
4. Your scale is set at the factory to weigh in pounds/ounces. To switch
between kilograms/grams (g), pounds and ounces (lb:oz), milliliters (ml)
and fluid ounces (fl oz), press the “ ” button.UNIT
To measure liquid ingredients: The liquid measure feature is suitable for
all water based liquids, including wine, milk, stock, cream etc. Note: Oils
have a lower specific gravity, which will result in a volume reading of
approx +10%. If measuring oils by volume on this scale, please adjust for
this accordingly.
5. Place the item to be weighed on the center of the platform. The weight will
display. As you add weight, the weight displayed increases.
6. When the weight is removed, the display will return to zero. The unloaded
scale will turn off automatically in 45 to 70 seconds. If there is weight left
on the scale that does not change, the scale will turn off automatically
in 2 ½ to 3 ½ minutes. Press and hold “q/TARE” for 3 seconds to turn the
scale off manually.
BATTERY REPLACEMENT
1. Your Taylor® scale is equipped with a low battery indicator. It will display
“ ” or readings will grow dim or become irregular if the battery needs
replacement.
2. Open the battery compartment on the bottom of the scale.
3. Remove the old battery. Place the new battery into the battery
compartment with the “ ” sign showing.+
4. Replace the battery compartment cover.
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items,
do not let children handle batteries. If swallowed, seek medical attention
immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak.
Remove the batteries if the scale will not be used for a long period of time.
TARE OPERATION
You may wish to weigh ingredients in a bowl or other container (not included).
In this case, you will need to tare, or offset, the weight of the bowl so that
only the weight of the ingredients is displayed.
3
TARE OPERATION (Cont.)
1. Choose a container that will safely balance on the platform without tipping
or falling. Do not use a heavy container, as this might reduce the maximum
capacity of the scale.
2. While the scale is off, place the empty container on the scale platform.
Turn the scale on. The display will show zero. The weight of the container
has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone will
display.
4. The weight of additional ingredients may be tared out as well. For example,
if a recipe calls for ½ lb rice and ½ lb beans, place the rice into the bowl.
Once the correct amount of rice is weighed, press “
q/TARE
” until the
display is reset to zero. Add the ½ lbs of beans. Both ingredients have been
accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a negative
number when the items are removed from the scale. To reset the scale
back to zero for a new measurement, press “
q/TARE
” until the display
resets to zero.
PRECAUTIONS
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a
mild soap. Never use detergents, excess water, treated cloths, harsh cleaning
agents, or sprays. Avoid contact with acids, such as citrus juices.
2. Do not tamper with the scale’s internal components. Doing so will invalidate
the warranty on this unit and may cause damage. The scale contains no user-
serviceable parts.
3. Although your scale is designed to be maintenance-free, it contains sensitive
electronic parts. Avoid rough treatment. Treat it with care to ensure the best
performance.
4. This scale is intended for home/consumer use only. It is not intended for
commercial or medical use.
5. This scale is designed to read weights up to 11 lb/176 fl oz/5 kg/5000 ml. To
prevent damage, do not place more than 11 lb/176 fl oz/5 kg/5000 ml on it.
6. Do not store scale where you store cleaning chemicals. The vapors from some
household products may affect the electronic components of your scale. Do
not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to prevent run
down of the battery, do not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the
battery if the scale will not be used for a long period of time.
9. unStUnstable Warning: Should “ ” appear on the display, this indicates the
scale is unstable. Place the scale on a hard, level surface during use.
10. EEEE Overload Warning: Should “ ” appear on the display during a weighing,
this indicates that the maximum weighing capacity of the scale has been
exceeded. Remove the weight immediately; otherwise, permanent damage
could occur.

Product specificaties

Merk: Taylor
Categorie: Keukenweegschaal
Model: 1053

Heb je hulp nodig?

Als je hulp nodig hebt met Taylor 1053 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Keukenweegschaal Taylor

Taylor

Taylor 3812 Handleiding

28 Augustus 2023
Taylor

Taylor 3842 Handleiding

28 Augustus 2023
Taylor

Taylor 1250BK Handleiding

27 Augustus 2023
Taylor

Taylor 1053 Handleiding

27 Augustus 2023
Taylor

Taylor 3897 Handleiding

27 Augustus 2023
Taylor

Taylor 3907 Handleiding

27 Augustus 2023
Taylor

Taylor 3828 Handleiding

27 Augustus 2023
Taylor

Taylor 3817 Handleiding

27 Augustus 2023
Taylor

Taylor 3896 Handleiding

27 Augustus 2023
Taylor

Taylor 3831 Handleiding

27 Augustus 2023

Handleiding Keukenweegschaal

Nieuwste handleidingen voor Keukenweegschaal

Aurora

Aurora AU 4301 Handleiding

26 April 2024
TFA

TFA 50.2003.02 Handleiding

9 April 2024
Smeg

Smeg KSC01 Handleiding

3 April 2024
Caso

Caso KitchenDuo Handleiding

2 April 2024
Gourmetmaxx

Gourmetmaxx 04140 Handleiding

26 Maart 2024
TFA Dostmann

TFA Dostmann 50.2003.02 Handleiding

18 Maart 2024
Witt

Witt WPKS5S Handleiding

5 Maart 2024
Witt

Witt WCKSF5S Handleiding

5 Maart 2024
Vivax

Vivax KS-502G Handleiding

26 Februari 2024
Etekcity

Etekcity EKS-C302-WUS Handleiding

20 Februari 2024