Taylor 3907 Handleiding

Taylor Keukenweegschaal 3907

Lees hieronder de đź“– handleiding in het Nederlandse voor Taylor 3907 (4 pagina's) in de categorie Keukenweegschaal. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
3907
Digital Kitchen Scale
Thank you for purchasing a Taylor® digital kitchen scale. Your Taylor® scale is an example of superior
design and craftsmanship. Please read this instruction manual carefully before use. Keep these
instructions handy for future reference.
BATTERY INFORMATION
This scale operates on 3 batteries (included). Always replace all batteries at the same time; do not “AAA”
combine old and new batteries. Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries. Replace batteries if “Lo” appears on the display, or the readings grow dim or
irregular. To replace the batteries:
1. Open the battery compartment on the bottom of the scale
2. Remove the old batteries from the compartment.
3. Place the batteries into the battery compartment as indicated by the polarity symbols marked in the
compartment.
4. Replace the battery compartment cover.
NOTE: Please recycle or dispose of batteries per local regulations.
WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle
batteries. If swallowed, seek medical attention immediately.
PRECAUTION: Do not dispose of batteries in fire. Batteries may explode or leak. Remove the batteries
if the scale will not be used for a long period of time.
GENERAL WEIGHING OPERATION
1. Place the scale on a hard, level surface.
2. Press the “ ” button to turn the scale on. The display will turn on and show zero when it is ready
for use. If the display does not show zero, press the “tare” button. The scale will reset (tare) to zero.
3. Your scale weighs in pounds/ounces (lb oz). To switch to grams (g), press the “UNIT” button to
change the units of measurement.
4. Place the item to be weighed on the center of the platform. The weight will display. As you add
weight, the weight displayed increases.
5. The scale will turn off automatically after approximately 1 minute of non-use or if there is no change
in weight in approximately 3 minutes. To turn the scale off manually, press and hold the “ ” button
until the scale turns off.
TARE OPERATION
You may wish to weigh ingredients in a bowl or other container (not included). In this case, you will need
to tare, or offset, the weight of the bowl so that only the weight of the ingredients is displayed.
1. Choose a container that will safely balance on the platform without tipping or falling. Do not use a
heavy container, as this might reduce the maximum capacity of the scale.
2. While the scale is off, place the empty container on the scale platform. Turn the scale on. The
display will turn on and then show zero. The weight of the container has been zeroed out.
3. Add the ingredient to be weighed. The weight of the ingredient alone will display.
4. The weight of additional ingredients may be tared out as well. For example, if a recipe calls for 8oz
of rice and 8oz of beans, place the rice into the bowl. Once the correct amount of rice is weighed,
press the “TARE button to reset the display to zero. Add the 8oz of beans. Both ingredients have ”
been accurately weighed in the same bowl.
5. When weights have been tared out, the display will show a negative number when the items are
removed from the scale. Press the “ ” button to reset the scale back to zero for a new TARE
measurement.
HOLD FUNCTION
When the “HOLD” function is turned on, the LCD screen will continue to display the weight after the
item is removed from the platform. To turn on the “HOLD” function:
1. While the scale is on, place the item to be weighed on the platform.
2. Press the “HOLD” button “HOLD” icon appears. and the The weight is locked in and the items on the
platform can be removed.
3. To release the “HOLD” function, press the “HOLD” button again. “HOLD” will disappear from the
screen. The “HOLD” function is automatically disabled when the scale turns off.
Notes:
• Other functions will not operate when the scale is in the “HOLD” mode.
• The “HOLD” function can only operate if the weight is stable on the platform. If the weight is
unstable, check to see that the scale platform rests properly on the scale. If necessary, move the
item slightly on the platform until the weight locks in.
PRECAUTIONS
1. Clean exposed parts with a soft, slightly damp cloth. To remove stains, use a mild soap. Never use
detergents, excess water, treated cloths, harsh cleaning agents, or sprays. DO NOT immerse the
electronic scale in water or wash in a dishwasher.
2. Do not tamper with the scale’s internal components. Doing so will invalidate the warranty on this
unit and may cause damage. The scale contains no user-serviceable parts.
3. Although your scale is designed to be maintenance-free, it contains sensitive electronic parts. Avoid
rough treatment. Treat it with care to ensure the best performance.
4. This scale is intended for home/consumer use only. It is not intended for commercial or medical use.
5. This scale is designed to read weights up to lb x 0.01 oz / 22 10000 g x 0.1 g. To prevent damage, do
not place more than 22 10 lb / 000 g on it.
6. Do not store scale where you store cleaning chemicals. The vapors from some household products
may affect the electronic components of your scale. Do not store scale on its side.
7. This scale is an extremely sensitive weighing device. In order to prevent run down of the battery, do
not store anything on the scale.
8. Do not dispose of batteries in fire. Batteries may explode or leak. Remove the battery if the scale
will not be used for a long period of time.
9. “UnSt” = Unstable Warning. Should “UnSt” appear on the display, this indicates the scale is unstable.
Place the scale on a hard, level surface during use.
10. “O-Ld” = Overload Warning: Should “O Ld” (overload) appear on the display during a weighing, this -
indicates that the maximum weighing capacity has been exceeded. Remove the weight immediately;
otherwise, permanent damage could occur.
Party issuing Supplier’s Declaration of Conformity &
Responsible party U.S. Contact information: –
Taylor Precision Products
2311 W. 22nd Street, Suite 200
Oak Brook, IL 60523
Equipment:
Product Name: Kitchen Scale
Model No.: 3907
Trade Name: Taylor
We declare under our sole responsibility that the above referenced product has been tested according
to FCC requirements and this device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on. The user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
ONE (1) YEAR LIMITED WARRANTY
Taylor® warrants this product to be free from defects in material or workmanship (excluding batteries)
for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or
wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or
repair. If service is required, do not return to retailer. Should this product require service (or
replacement at our option), please pack the item carefully and return it prepaid, along with store receipt
showing the date of purchase and a note explaining reason for return to:
Taylor Precision Products
2220 Entrada Del Sol, Suite A
Las Cruces, New Mexico 88001 USA
www.taylorusa.com
Email: prodsupport@taylorusa.com
There are no expressed warranties except as listed above. This warranty gives you specific legal rights,
and you may have other rights which vary from state to state.

Product specificaties

Merk: Taylor
Categorie: Keukenweegschaal
Model: 3907

Heb je hulp nodig?

Als je hulp nodig hebt met Taylor 3907 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Keukenweegschaal Taylor

Taylor

Taylor 3812 Handleiding

28 Augustus 2023
Taylor

Taylor 3842 Handleiding

28 Augustus 2023
Taylor

Taylor 1250BK Handleiding

27 Augustus 2023
Taylor

Taylor 1053 Handleiding

27 Augustus 2023
Taylor

Taylor 3897 Handleiding

27 Augustus 2023
Taylor

Taylor 3907 Handleiding

27 Augustus 2023
Taylor

Taylor 3828 Handleiding

27 Augustus 2023
Taylor

Taylor 3817 Handleiding

27 Augustus 2023
Taylor

Taylor 3896 Handleiding

27 Augustus 2023
Taylor

Taylor 3831 Handleiding

27 Augustus 2023

Handleiding Keukenweegschaal

Nieuwste handleidingen voor Keukenweegschaal

Aurora

Aurora AU 4301 Handleiding

26 April 2024
TFA

TFA 50.2003.02 Handleiding

9 April 2024
Smeg

Smeg KSC01 Handleiding

3 April 2024
Caso

Caso KitchenDuo Handleiding

2 April 2024
Gourmetmaxx

Gourmetmaxx 04140 Handleiding

26 Maart 2024
TFA Dostmann

TFA Dostmann 50.2003.02 Handleiding

18 Maart 2024
Witt

Witt WPKS5S Handleiding

5 Maart 2024
Witt

Witt WCKSF5S Handleiding

5 Maart 2024
Vivax

Vivax KS-502G Handleiding

26 Februari 2024
Etekcity

Etekcity EKS-C302-WUS Handleiding

20 Februari 2024