Tado Starter Kit - Wired Smart Thermostat V3 plus Handleiding

Tado Thermostaat Starter Kit - Wired Smart Thermostat V3 plus

Bekijk gratis de handleiding van Tado Starter Kit - Wired Smart Thermostat V3 plus (8 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 185 mensen en kreeg gemiddeld 4.9 sterren uit 93 reviews. Heb je een vraag over Tado Starter Kit - Wired Smart Thermostat V3 plus of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/8
This manual is meant exclusively for professional installers. It includes generic instructions to install the tado˚ Smart
Thermostat.
Manual for Professional
Installers
For the Starter Kit - Wired Smart Thermostat V3+
English International
Manual version 3.2
EN
DE
IT
FR
ES
NL
DIY Installation
If you are not a professional installer, please download the tado˚ app. There you will find specific installation instructions.
A. Remove the battery
protection strip.
B. Press the button for
3 sec to start pairing.
C. Pairing may take up
to 2 min.
D. The static icon below
indicates successful pairing.
If pairing fails (E0), make sure the distance between the devices is approximately 3 meters. Pair again by pressing the
button for 3 sec.
2. Pair the Smart Thermostat
1. Install the Internet Bridge
A. Connect the Internet Bridge to the router.
If no free USB port is available on the router, use the
included 5V power adapter.
B. Press and hold the pairing button until the pairing LED
starts blinking.
2
min
3
sec
Solid on
Blinking
Unfold to check:
Step 4: Wire the Smart Thermostat
Step 5: Configuration
Mount the backplate of the Smart Thermostat to the wall using the included screws or the adhesive pads.
3. Mount the Smart Thermostat
or


Product specificaties

Merk: Tado
Categorie: Thermostaat
Model: Starter Kit - Wired Smart Thermostat V3 plus

Heb je hulp nodig?

Als je hulp nodig hebt met Tado Starter Kit - Wired Smart Thermostat V3 plus stel dan hieronder een vraag en andere gebruikers zullen je antwoorden