Sun Joe 24V-X2-24HT-CT Handleiding

Bekijk gratis de handleiding van Sun Joe 24V-X2-24HT-CT (56 pagina’s), behorend tot de categorie Heggenschaar. Deze gids werd als nuttig beoordeeld door 100 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Sun Joe 24V-X2-24HT-CT of wil je andere gebruikers van dit product iets vragen? Stel een vraag

© 2021 by Snow Joe

®, LLC

All rights reserved. Original instructions.SAVE THESE INSTRUCTIONS

1

EN

A Division of Snow Joe

®, LLC

R

OPERATOR’S MANUAL

Model 24V-X2-24HT-CTForm No. SJ-24V-X2-24HT-CT-880E-MR1

CORDLESS HEDGE TRIMMER – TOOL ONLY

48 V MAX* | 24-INCH

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Power Tool Safety

Warnings

m WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-

operated (corded) power tool or battery-operated (cordless)

power tool.

mDANGER! This indicates a hazardous situation, which,

if not followed, will result in serious injury or death.

mWARNING! This indicates a hazardous situation, which,

if not followed, could result in serious injury or death.

mCAUTION! This indicates a hazardous situation, which,

if not followed, could result in minor or moderate injury.

Work Area Safety

1. Keep work area clean and well lit – Cluttered or dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust – Power tools create sparks which may ignite the

dust or fumes.

3. Keep children and bystanders away while operating a

power tool – Distractions can cause you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs with

earthed (grounded) power tools. Unmodied plugs and

matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators – There is an increased risk of electric shock

if your body is earthed or grounded.

3. Do not expose power tools to rain or wet conditions

– Water entering a power tool will increase the risk of

electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use common

sense when operating a power tool. Do not use a

power tool while you are tired or under the inuence

of drugs, alcohol or medication – A moment of

inattention while operating power tools may result in

serious personal injury.

2. Use personal protective equipment. Always wear eye

protection – Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

3. Prevent unintentional starting. Ensure the switch is in

the o-position before connecting to power source

and/or battery packs, picking up or carrying the tool.

– Carrying power tools with your nger on the switch or

energizing power tools that have the switch on invites

accidents.

4. Do not overreach. Keep proper footing and balance at

all times – This enables better control of the power tool in

unexpected situations.

5. Dress properly. Do not wear loose clothing or jewelry.

Keep your hair, clothing and gloves away from moving

parts – Loose clothes, jewelry or long hair can be caught

in moving parts.

6. Remove any adjusting key or wrench before turning

the power tool on – A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

Product specificaties