StarTech.com ST3300G3UA Handleiding

Bekijk gratis de handleiding van StarTech.com ST3300G3UA (2 pagina’s), behorend tot de categorie Netwerkkaart/adapter. Deze gids werd als nuttig beoordeeld door 19 mensen en kreeg gemiddeld 5.0 sterren uit 2 reviews. Heb je een vraag over StarTech.com ST3300G3UA of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Instruction manual

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT:Guida per l’uso - it.startech.com

Manual Revision: 10/22/2015

For the latest information, technical specications, and support for

this product, please visit www.startech.com/ST3300G3UA.

Packaging contents

• 1 x 3-port USB 3.0 hub plus Gigabit Ethernet

• 1 x instruction manual

System requirements

• Host computer with a USB 2.0 or USB 3.0 port

• Any of the following operating systems:

• Windows® 10 (32-bit or 64-bit)

• Windows 8.1 (32-bit or 64-bit)

• Windows 8 (32-bit or 64-bit)

• Windows 7 (32-bit or 64-bit)

• Windows Server® 2008 R2

• Windows Server 2012

• Mac OS 10.7 and later (tested up to 10.11)

Note: To obtain the maximum USB throughout, you must use a

computer with a USB 3.0 port.

Operating system requirements are subject to change. For the latest

requirements, please visit www.startech.com/ST3300G3UA.

ST3300G3UA

3-Port USB 3.0 Hub Plus Gigabit Ethernet

*actual product may vary from photos

Product diagram

Gigabit RJ45 portUSB 3.0 ports

Introduction

The ST3300G3UA is a sleek and stylish USB 3.0 hub and Gigabit

Ethernet adapter that is portable and lightweight. It’s equipped

with three USB 3.0 ports with throughput up to 5Gbps and is also

backward compatible, so you can use it with your USB 2.0 and earlier

devices.

USB 3.0 cable

Power LED

Link and activity LED

Gigabit RJ45 port

USB 3.0 cable

Conrm driver installation

Depending on the version of the operating system that you’re

running, when you connect the hub to your computer, the drivers

are installed automatically.

To make sure that the drivers installed properly, on a computer

running a version of Windows, do the following:

1. On your computer, navigate to Device Manager.

2. Under , check to make sure that there isn’t an Network adapters

exclamation mark next to any of the adapters.

If there is an exclamation mark next to the Realtek USB device, see

the topic for more information.Install a driver

Connect the hub to a computer

1. Connect the USB 3.0 cable on the hub to a USB port on the host

computer.

Note: For the best performance, use a computer with a USB 3.0 port.

2. Connect your Cat 5e/6 network connection to the Gigabit RJ45

port on the hub.

3. Connect up to three USB 3.0 peripherals to the hub as necessary.

About USB 3.0 and USB 3.1 Gen 1

USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard

oers speeds up to 5Gbps.

Product specificaties