StarTech.com ST10GSPEXNB2 Handleiding

StarTech.com כרטיס/מתאם רשת ST10GSPEXNB2

Lees hieronder de 📖 handleiding in het Nederlandse voor StarTech.com ST10GSPEXNB2 (2 pagina's) in de categorie כרטיס/מתאם רשת. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: July 12, 2022

Product Diagram (ST10GSPEXNB2)

Port/LED/

Connector Function

1Bracket • Secures the card to the . The Computer Case Full-

height Bracket comes pre-installed.

2LED Indicators

• Left LED Indicator Link Speed is

• Solid Green = 10Gbps

• Solid Amber =

5Gbps/2.5Gbps/1Gbps/100Mbps/10Mbps

• Right LED Indicator Link Status is

• Solid Green = Active link

• Flashing Green = Activity

3Ethernet Port

• Connect a to the Network Cable Network Card

• Supports

10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps/10 Mbps

For 10 Gbps speeds Cat6 or higher cable is needed

4PCIe p1-x2 Connector • Insert into a on the PCI Express Slot Host Computer

1-Port 10GBase-T / NBase-T Ethernet Network Adapter Card - PCIe Ver 3.0 x2

Package Contents

• PCIe 10 Gbps Network Card x 2

• Low-prole Bracket x 1

• Quick-Start Guide x 1

Requirements

For the latest requirements, please visit www.startech.com/ST10GSPEXNB2

• Computer with an available PCI Express Slot (x2, x4, x8, or x16)

Installation

Install the PCI Express Card

WARNING!

Static Electricity PCI Express Cardscan severely damage . Ensure that you are

adequately before you open your or touch the Grounded Computer Case PCI

Express Card Anti-Static Strap Anti-Static Mat . You should wear an or use an when

installing any computer component. If an isn’t available, discharge Anti-Static Strap

any built-up static electricity by touching a large for several Grounded Metal Surface

seconds. Only handle the by its edges and don’t touch the gold PCI Express Card

connectors.

1. Turn o the and any that are connected to it (for Computer Peripheral Devices

example, , , etc.).Printers External Hard Drives

2. Unplug the from the back of the .Power Cable Computer

3. Disconnect any that are connected to the .Peripheral Devices Computer

4. Remove the from the . Consult the documentation that came Cover Computer Case

with the for details about doing this safely.Computer

5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate

from the back of the . Consult the documentation that came with Computer Case

the for details about doing this safely. This card works in PCI Express , Computer x2

x4 x8 x16 Slots, , or .

6. Gently insert the into the open and fasten the PCI Express Card PCI Express Slot

Bracket Computer Case to the back of the .

Note: If you install the into a or a PCI Express Card Small Form Factor Low-Prole

Desktop System Full-, it may be necessary to replace the pre-installed standard

Height Bracket Low-Prole Bracketwith the included .

8. Return the onto the .Cover Computer Case

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com

could void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that

may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or

agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots,

loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply,

the limitations or exclusions contained in this statement may not apply to you.

Safety Measures

• Read the entire manual and ensure the instructions are fully understood before assembling and/or using this product.

Mesures de sécurité

• Assemblez ce produit conformément aux instructions.

安全対策

• 必ず取扱説明書に従って本製品の組み立てを行って下さい。

Misure di sicurezza

• Assicurarsi di Assemblare il prodotto secondo le istruzioni.

Säkerhetsåtgärder

• Se till att du monterar produkten i enlighet med instruktionerna

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com Ltd.

45 Artisans Crescent

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Road

Brackmills,

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

9. Reconnect the to the back of the .Power Cable Computer

10. Reconnect all of the disconnected in .Peripheral Devices Step 2

11. Turn on your and .Computer Peripheral Devices

Install the Driver

1. Navigate to www.startech.com/ST10GSPEXNB2

2. Click the tab.Drivers & Downloads

3. Under , download the for your operating system.Driver(s) Driver

For Windows Systems

a. Extract the contents of the by the Driver Package Right Clicking Driver Folder

that was downloaded from the website and select . Follow the on-Extract All

screen instructions to nish the . Extraction

b. Follow the instructions on the accompanying

ST10GSPEXNB2_Windows_DIG.pdf Installation Instructions le for further .

For Linux Systems

a. Extract the contents of the .Driver Package

b. Follow the instructions on the accompanying le.README.txt

Verify the Driver Installation (Windows)

1. Navigate to the .Device Manager

2. Under , right-click Network Adapters Marvell AQtion 10Gbit Network Adapter

and click the option.Properties

3. Conrm that the is installed and working as expected.Driver

Verify Driver Installation (Linux)

1. Run from the command line.lsmod | grep -i atlantic

2. Verify that the is present in the command line. Driver

Product specificaties

Merk:	StarTech.com
Categorie:	כרטיס/מתאם רשת
Model:	ST10GSPEXNB2
צבע המוצר:	שחור
משקל:	70 גרם
טכנולוגיית קישוריות:	חוטי
חיבור Ethernet LAN:	כן
סוג ממשק אתרנט:	2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet, Fast Ethernet, Gigabit Ethernet
כמות יציאות ( Ethernet LAN (RJ-45:	1
ממשק:	Ethernet
טווח טמפרטורת פעולה (T-T):	0 - 60 °C
רוחב:	107 מ"מ
עומק:	121 מ"מ
גובה:	22 מ"מ
מערכות הפעלה לינוקס נתמכות:	כן
ממשק מארח Host:	PCIe
ממשק פלט:	RJ-45
מגדר ממשק מארח:	זכר
גרסת PCI:	3.0
גורם מבנה כרטיס PCI:	גובה מלא (פרופיל נמוך)
קצב מרבי להעברת נתונים:	10000 מגה ביט/ שניה
תקני רשתות:	IEEE 1588, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3an, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3i, IEEE 802.3u
קצב העברת מידע Ethernet LAN:	10,100,1000,2500,5000,10000 מגה ביט/ שניה
אוטומטי MDIX IEEE:	כן
דו כיווני מלא:	כן
תומך Jumbo Frames:	כן
מסגרות Jumbo:	16000
טכנולוגיית כבלים:	10GBase-T
פנימי:	כן
רכיב עבור:	מחשב אישי
מחווני LED:	כן
טווח טמפרטורות אחסון (T-T):	-10 - 70 °C
משקל האריזה:	120 גרם
גובה האריזה:	35 מ"מ
רוחב אריזה:	210 מ"מ
עומק האריזה:	145 מ"מ
תושבות הרכבה כלולות:	כן
מדריך התקנה מהירה:	כן
כמות לכל קרטון ראשי:	40 יח'
אורך האריזה הראשית:	375 מ"מ
גובה קרטון מאסטר:	320 מ"מ
רוחב קרטון מאסטר:	445 מ"מ