StarTech.com SDOCKU313 Handleiding

Bekijk gratis de handleiding van StarTech.com SDOCKU313 (2 pagina’s), behorend tot de categorie Cradle/docking station. Deze gids werd als nuttig beoordeeld door 12 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over StarTech.com SDOCKU313 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 06/17/2016

Packaging contents

• 1 x USB 3.1 dock for SATA drives

• 1 x USB 3.1 A-to-B cable

• 1 x universal adapter

• 4 x power adapter plug (NA/UK/EU/AUS)

• 1 x instruction manual

For the latest information, technical specications, and support for

this product, please visit www.startech.com/SDOCKU313.

System requirements

• USB-enabled computer system with an available USB port

• 2.5 in. or 3.5 in. SATA HDD or SSD

Note:To obtain the maximum USB throughput, StarTech.com

recommends that you use a PC with a USB 3.1 Gen 2 port.

Operating systems are subject to change. For the latest

requirements, please visit www.startech.com/SDOCKU313.

SDOCKU313

USB 3.1 (10 Gbps) dock for SATA drives

Product overview

Front view

Power button

Power and activity

LED

Drive slotDrive eject

button

Rear view

USB 3.1 type-B

connector (host)

DC power

connector *actual product may vary from photos

Install the drive

Warning! Hard drives and storage enclosures should be handled

carefully, especially when they’re transported. If you’re not careful

with your hard disk, you may lose data as a result. Always handle

storage devices with caution.

1. Connect the external power adapter from the drive dock to a

power outlet.

2. Insert a 2.5 in. or 3.5 in. drive into the drive slot on the top of the

docking station. Make sure that the connectors on the drive are

facing the same corner of the slot that has a cutout in the door.

The label on the drive should face the front of the dock.

3. Connect the included USB 3.1 cable from the drive dock to an

available USB port on your computer system. Your computer can

be turned on or turned o when you connect the USB cable.

4. Press the button on the top of the drive dock. The LED Power

under the power button should light up to indicate that the dock

is powered on. The LED blinks when the drive is being accessed.

Prepare the drive

If you install a hard drive or solid-state drive that already has data

on it, after you plug in the drive, it appears under or My Computer

Computer with a drive letter assigned to it.

If you install a brand-new drive that doesn’t contain any data, you

must prepare the drive for use.

If you use a computer that’s running Windows® 2000, Windows® XP,

Windows Vista®, or Windows® 7, do the following:

1. Depending on the OS version that you’re running, do one of the

following:

• On your desktop, right-click .My Computer

• On your desktop, right-click .Computer

2. Click .Manage

3. On the Computer ManagementDisk Management screen, click .

4. Locate the disk that is labeled . To conrm that the Unallocated

drive is the correct one, check the drive capacity.

5. Right-click the section of the window that says and Unallocated

click New Partition.

6. To set up the drive, complete the instructions in the New

Partition wizard.

When the drive is successfully installed, the disk appears under My

Computer Computer or with a drive letter assigned to it.

Product specificaties