Speco Technologies VLDT4G Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies VLDT4G (3 pagina's) in de categorie Videocamera. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
! ITEM : VLDT4W/VLDT4G
! Caution for Installation
1. In order to prevent electronic shock, don t loosen any screws or covers.
2. Do not directly touch the front glass. If necessary, use a soft cloth
moistened with alcohol to wipe off the dust.
3. Avoid places where there are frequent vibrations or shocks.
4. Don t operate the camera beyond its temperature, power source
ratings.
5. When any abnormalities happen, make sure to unplug the camera and
contact your local dealer.
! Packing
1. Camera X1
2. Junction box X1
3 . User Manual X1
4. PWA 4*25 Screw X3
5. KM 4*10 Screw X3
6. PM 4*12 Screw X4
7. Junction box cotton pad X1
8. Camera cotton pad X1
9. Ф8.3mm rubber ring X3
10. Plastic Anchor- -Conical X3
11. Hexagonal Wrench X1
12. Mounting drawing paper X1
! Specification
ITEM
VLDT4W/VLDT4G
IP Rating
IP66
Type
Removable IR Cut Filter
Signal System
NTSC/PAL
Pick Up Device
1/2.9" 2.2 Mega Pixels CMOS
Picture Elements
1920(H)X1080(V)
Min Illumination
0Lux with IR LED 12 pieces
S/N Ratio
52dB
Lens
3.6mm Board Lens
3D/2D
ON
SENS- UP
ON
IR SMART
ON
White Balance
ATW
Back Light Compensation
OFF
DWDR
ON/OFF
OSD
With UTC Signal(DVR Control OSD)
Video Out- put
HD CVI/ CVBS- - -TVI/HD AHD/HD
Power Supply
DC12V ±10%
Current Consumption
400mAMAX
IR Effect Distance
49.2ft (Outdoor)
Dimension
3.7” 3.15”× inch
Camera Weight
330g (11.64oz)
Storage Temperature
- 22+140
Operating Temperature
- 22+104
Junction box
Dimension
3.7” 1.77×” inch
Weight
230g (8.1oz)
Remark: Non may cause camera damaged -regulative adaptor .
Multi- Format HD Analog IR Camera
!video signal output switches
Overview
Junction box cotton pad
M20 Plastic Screw
Junction box
Water-proof
rubber ring
Junction box upper cover
KM4*10 threaded
screws
Installation
( )1
( )2
( )3
( )4
( )5
( )6
1Drill installation holes according to drawing paper
then stuff into rubber stoppers
2Paste cotton pad onto the bottom of junction
boxthen push the water-proof rubber ring onto the
upper body of junction box
4Use 3pcs KM4*10 threaded screws to fix
the upper cover with the junction box body
5Disassemble the dome base put the
cotton pad onto the upper coverthen use
4pcs PM4*12 screws to fix the dome base
with the junction box
6Connect all cables and
put them into the junction
box then install the
dome with the dome base
well then use the dome
ring to fix


Product specificaties

Merk: Speco Technologies
Categorie: Videocamera
Model: VLDT4G

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies VLDT4G stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Videocamera Speco Technologies

Handleiding Videocamera

Nieuwste handleidingen voor Videocamera