Speco Technologies H2AB2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Speco Technologies H2AB2 (7 pagina's) in de categorie Videocamera. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
User Manual
Thank you for purchasing our product. Speco Technologies is constantly developing and
improving products. We reserve the right to modify product design and specifications
without notice and without incurring any obligation.
H2AB2/H2AT2
Warnings
Speco Tech nolog ies is not responsible for any problems caused by improper operation or repair.
If th e product does not work properly, please contact the dealer or wh ere the product was purchased.
Do not expo se the unit to heavy stress, vio len t vibration or long-term expo sure to water and humidity
during transportation, storage, and/or installation.
Do not install near sources of heat.
Only install the p rod uct in env iro n ments in side the specification operating temperature and humidity
rang e.
Do not install the camera near po wer lines, radar equipment or other electro magnetic radiation.
Do not block any ventilation openin gs if any.
Use all the weatherproofing hardware req uirement to minimize weather intrusion.
sensitiv ity, low noise and distortion and supp orts HD video transmission with the common coaxial cable,
ensu rin g the requirement of the HD monitoring in the traditional surveillance system.
This camera series is th e latest techno logy and advanced circuit design , which features high definition and
Introduction
Hig h Reso lution
Adopt high performance senso r, providing high definition and clear image.
Hig h Transmission Performance
Real time transmission with high sp eed and lon g distance- .
DNR
Reduce noise from brightness and co lor signal .
OSD
Access the camera settings which can be clearly disp lay ed through the main menu.
White Balance
Adju st the co lor temperature according to the environmen t automatically.
AGC
Adju st th e gain of amplifier, enabling th e camera to output the stan dard video sig nal in different
ligh tin g co n dition.
Backlight Compensation BLC ( )
When the back of the captured object is too much bright, you can set BLC for the captured object to
mak e it clearer.
Coaxial a udio tra nsmission
1
Cables
Power Ca ble
Video Output
Video Switch Ca ble
Video Switch: Four v ideo ou tput mo des can be optional--AHD, TVI, CVI and CVBS
(a) remo ve the cover of the video swi tch cab le; (b) h old and press t h e button in the video
switch cab le fo r 5 seco nds to switc h the c urrent video ou t put.
2
Before y ou start, p lease make sure th at the wall or ceilin g is stro ng e noug h to withs t and th ree times
the wei g ht of th e camera. Please install and use the camera in the dry environment.
Youd better in stall back the lens cove r or lower dome less than 4 hours after removing it.
The mounting types of cameras are only for reference.
Installation
►Mounting for H2AB2
1. Drill the screw holes and the cable hole on the wall according to the drill template.
2. Route and connect the cables .
3. Secure the mounting base with camera to the wall with screws as shown below.
4.6
25.1
82.0
72.2
120°
120°
62.5mm
18.1mm
36.1mm


Product specificaties

Merk: Speco Technologies
Categorie: Videocamera
Model: H2AB2

Heb je hulp nodig?

Als je hulp nodig hebt met Speco Technologies H2AB2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Videocamera Speco Technologies

Handleiding Videocamera

Nieuwste handleidingen voor Videocamera