Speakman CPT-27000 Handleiding

Bekijk gratis de handleiding van Speakman CPT-27000 (2 pagina’s), behorend tot de categorie Douchesysteem. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.6 sterren uit 8 reviews. Heb je een vraag over Speakman CPT-27000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTIONS FOR MODELS

92-CPT-27000-01

For additional assistance or service please contact:

SPEAKMAN

®

Company

400 Anchor Mill Road

New Castle, DE 19720

800-537-2107

customerser[email protected]

www.speakman.com

CPT-27000

TOOLS AND SUPPLIES

Phillips

Screwdriver

Measuring

Tape

Warranty information can be found at:

www.speakman.com

WARRANTY

MAINTENANCE

Cover your drain to prevent loss of parts.

SAFETY TIPS

IMPORTANT

• Be sure to read instructions thoroughly before

beginning installation.

• Do not over-tighten any connections or damage

may occur.

Your new Speakman Product is designed for years of

trouble-free performance. Keep it looking new by

cleaning it periodically with a soft cloth. The use of harsh

chemicals and abrasives on any of the Speakman custom

finish products may damage the finish and void the

product warranty. Please be sure to only use approved

cleaners. Please contact Speakman for any clarification

of acceptable cleaners.

1

Clean wall surface. Place Mounting Base (1) onto the valve, align mounting holes, and secure

with supplied screws (2).

2

There are two connectors included to allow for both Shallow Mount or Deep Mount applications.

from finished wall surface. Please select Connector appropriate for your installation.

For Deep Mount Application

For Shallow Mount Application

3

Confirm that the valve is in the “OFF” position. Place appropriate Connector (5) onto spindle

of valve making sure to orient the Connector so that one set of splines are perfectly vertical

as shown below.

4

When installed correctly, the Connector (5), should

extend beyond the Mounting Base in-between 7/8” -

1 3/4”. Secure with screw (6). If your installation

does not fall within this range, try swapping

Connectors.

IMPORTANT

7/8”- 1 3/4”

5

Place Wall Plate (3) onto Mounting Base.

6

Align Handle Assembly (8) with Connector and Escutcheon. Keep Handle (8A) in a stationary

vertical position as you thread Handle Hub (8B) onto the Mounting Base.

Product specificaties