Speakman VS-2272-E15 Handleiding

Bekijk gratis de handleiding van Speakman VS-2272-E15 (2 pagina’s), behorend tot de categorie Douchesysteem. Deze gids werd als nuttig beoordeeld door 26 mensen en kreeg gemiddeld 4.9 sterren uit 4 reviews. Heb je een vraag over Speakman VS-2272-E15 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

INSTRUCTIONS FOR MODELS

92-VS-2272-E15-R2

For additional assistance or service please contact:

SPEAKMAN

®

Company

400 Anchor Mill Road

New Castle, DE 19720

800-537-2107

customerser[email protected]

www.speakman.com

VS-2272-E15

TOOLS AND SUPPLIES

IMPORTANT

SAFETY TIPS

Cover your drain to prevent loss of parts.

MAINTENANCE

WARRANTY

Additional warranty information can be found at:

www.speakman.com

Thread Seal

Tape

Adjustable

Wrench

Be sure to read instructions thoroughly before beginning

installation. Do not overtighten any connections or

damage may occur. This hand shower has an optimal

operating range of 20-80 psi.

Periodic cleaning using a mild soap and warm water

will help keep your Hand Shower’s appearance in its

original condition.

For best results, dry immediately with a soft, clean cloth.

DO NOT USE harsh and/or abrasive cleaners.

On CHROME PLATED HAND SHOWERS, a two (2)

part white vinegar, one (1) part water solution can be

used to break down excessive mineral deposits on the

sprays. Let the showerhead soak in the solution for

about ½ hour then rinse thoroughly. Brush off any

remaining mineral deposits if necessary.

DO NOT USE the vinegar/water treatment on any

finish other than Chrome.

1

Apply Thread Seal Tape to the outlet side

of shower arm in a clockwise direction.

2

Thread Bracket onto shower arm by turning

it in a clockwise direction. Tighten with

adjustable wrench.

3

Verify that rubber sealing washer is present

in hose coupling. Thread one

end of hose to the outlet port

of Bracket. Hand tighten.

4

Verify that a rubber sealing washer is

present in the remaining hose coupling.

Thread remaining end of Hose to base of

Hand Shower. Hand tighten.

5

Place Hand Shower into Bracket. Turn on

water supplies and check for leaks.

Product specificaties