Sony LMD-9050 Handleiding

Sony Monitor LMD-9050

Bekijk gratis de handleiding van Sony LMD-9050 (38 pagina’s), behorend tot de categorie Monitor. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.8 sterren uit 3.5 reviews. Heb je een vraag over Sony LMD-9050 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/38
3-875-074-12 (1)
LCD Monitor
© 2005 Sony Corporation
LMD-9050
LMD-9030
LMD-9020
Operating Instructions
2
Owner’s Record
The model and serial numbers are located at the rear.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ____________________
Serial No. ____________________
This operating instructions manual also applies to
the adaptor.
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
Dangerously high voltages are present inside
the unit. Do not open the cabinet. Refer
servicing to qualified personnel only.
In the event of a malfunction or when maintenance is
necessary, consult an authorized Sony dealer.
This unit contains substances which can pollute the
environment if disposed carelessly.
Please contact our nearest representative office or your
local environmental office in case of disposal of this
unit.
WARNING
THIS APPARATUS MUST BE EARTHED.
WARNING
This unit has no primary power switch.
When installing the unit, incorporate a readily
accessible disconnect device in the fixed wiring, or
connect the power cord to socket-outlet which must be
provided near the unit and easily accessible.
If a fault should occur during operation of the unit,
operate the disconnect device to switch the power
supply off, or disconnect the power cord.
For the customers in Europe
This product with the CE marking complies with both
the EMC Directive and the Low Voltage Directive issued
by the Commission of the European Community.
Compliance with these directives implies conformity to
the following European standards:
EN60950-1 : Product Safety
EN55103-1 : Electromagnetic Interference
(Emission)
EN55103-2 : Electromagnetic Susceptibility
(Immunity)
This product is intended for use in the following
Electromagnetic Environments:
E1 (residential), E2 (commercial and light industrial),
E3 (urban outdoors), E4 (controlled EMC environment,
ex. TV studio)
For the customers in Europe
The manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany. For any service or
guarantee matters please refer to the addresses given in
separate service or guarantee documents.
English
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Warning on power connection
Use a proper power cord for your local power supply.
1) Use an appropriate rating plug which is applied to local regulations. (IEC60320-1)
The United States,
Canada
Continental Europe UK, Ireland, Australia,
New Zealand
Plug type VM0233 COX-07/636
_ 1)
Female end VM0089 COX-02/VM0310B VM0303B
Cord type SVT H05VV-F CEE(13)53rd (O, C)
Rated Voltage &
Current
10A/125V 10A/250V 10A/250V
Safety approval UL/CSA VDE VDE


Product specificaties

Merk: Sony
Categorie: Monitor
Model: LMD-9050

Heb je hulp nodig?

Als je hulp nodig hebt met Sony LMD-9050 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden