Sony HZC-MSCN1 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Sony HZC-MSCN1 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 4 gebruikers gemiddeld met 4.2 sterren beoordeeld

Pagina 1/6
CAMERA OPERATING SOFTWARE
HZC-MSCN1
USER’S GUIDE [English]
1st Edition
Overview
2
Overview
The HZC-MSCN1 is optional software for the CNA-1
Camera Control Network Adaptor. Installing this
CNA-1 by expanding the Gateway function of the CNA-
1.
Camera selecting function
You can use the camera selecting command with the
HZC-MSCN1 to the CNA-1 and setting the Gateway
Emulation mode of the CNA-1 to MSU.
You can then select the camera, and control it by using the
simple protocol.
Target device for installing the HZC-
MSCN1
This software can be installed to the CNA-1 Camera
higher.
Examples of System Configurations
3
Examples of System Configurations
Controlling multiple Sony cameras from the expanded panel device
Note
The expanded panel device needs to be compatible with the protocol that is supplied by the CNA-1.
CNA-1 setup
For details about the setting items, see “Menu operation” on the CNA-1 Operation Manual.
CNS Configuration CNS Mode MCS
Master Mode Disable
Master IP Address IP address of Master MSU
Target IP Address No need to input
Gateway Configuration Gateway Mode Enable
Emulation Mode MSU
Network hub
: LAN cable
Expanded panel device
Camera head
MSU
MCS Mode: Master
CNA-1
CCU
MCS Mode: Client
Camera head
CCU
MCS Mode: Client
Camera head
CCU
MCS Mode: Client


Product specificaties

Merk: Sony
Categorie: Niet gecategoriseerd
Model: HZC-MSCN1

Heb je hulp nodig?

Als je hulp nodig hebt met Sony HZC-MSCN1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden