Sony HZC-BRCN1 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sony HZC-BRCN1 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 5.0 sterren beoordeeld

Pagina 1/11
CAMERA OPERATING SOFTWARE
HZC-BRCN1
USER’S GUIDE [English]
1st Edition (Revised 1)
Overview
2
Overview
The HZC-BRCN1 is optional software for the CNA-1
Camera Control Network Adaptor. Installing this
Video Camera remotely by expanding the Gateway
function of the CNA-1.
Compatible with the VISCA over IP
The CNA-1 with HZC-BRCN1 installed can control the
BRC-H900 remotely from RCP or MSU by converting
the communication protocol for the remote control panel
to the VISCA over IP.
Note
Only items for image quality can be controlled remotely.
You cannot control pan, tilt, and zoom.
Compatible with the multi-camera
operation
Using the multiple CNA-1s allows you to perform multi-
camera operation with multiple BRC-H900s.
Connection target devices
BRC-H900 (requires the BRBK-IP10 IP Control
Interface Card to be installed.)
RCP-1500/1501
MSU-1000/1500
HZC-CSM10
Target device for installing the HZC-
BRCN1
This software can be installed to the CNA-1 Camera
higher.
Examples of System Configurations
3
Examples of System Configurations
Controlling the BRC-H900 one-to-one from the RCP-1500 series
Connect the CNA-1, BRC-H900, and RCP (one device respectively) with LAN connection, and control the BRC-H900
from RCP.
You can control pan, tilt, and zoom by connecting the RM-IP10 IP Remote Controller.
BRC-H900
PoE compatible network hub
: LAN cable
CNA-1
RCP
RM-IP10


Product specificaties

Merk: Sony
Categorie: Niet gecategoriseerd
Model: HZC-BRCN1
Compatibiliteit: CNA-1, RCP-1500, RCP-1530, BRC-H900
Aantal licenties: 1 licentie(s)

Heb je hulp nodig?

Als je hulp nodig hebt met Sony HZC-BRCN1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden