DeWalt DCB1112 Handleiding

Bekijk gratis de handleiding van DeWalt DCB1112 (6 pagina’s), behorend tot de categorie Batterij-oplader. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.6 sterren uit 2 reviews. Heb je een vraag over DeWalt DCB1112 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

IMPORTANT SAFETY INSTRUCTIONS FOR ALL

BATTERY CHARGERS



WARNING: Read all safety warnings, instructions, and cautionary markings for the battery pack, charger and

product. Failure to follow the warnings and instructions may result in electric shock, fire and/or seriousinjury.

• SAVE THESE INSTRUCTIONS - The manual contains important safety and operating instructions.

• DO NOT attempt to charge the battery pack with any chargers other than a DeWALT charger. DeWALTchargers and

battery packs are specifically designed to worktogether.

The RBRC® Seal

Please take your spent battery packs to an authorized DeWALT service center or to your local retailer for

recycling. In some areas, it is illegal to place spent battery packs in the trash. You may also contact your

local recycling center for information on where to drop off the spent battery pack. Do not place in curbside

recycling. For more information visit www.call2recycle.org or call the toll‑free number in the RBRC®Seal.

RBRC® is a registered trademark of Call 2Recycle,Inc.

Shipping the DeWALT FLEXVOLT® Battery Pack

The DeWALT FLEXVOLT® battery pack has a battery cap that should be used when shipping the batterypack.

Attach the cap to the battery pack to ready it for shipping. This converts the battery pack to three

separate 20V batteries. The three batteries have the Watt hour rating labeled “Shipping” on the

battery pack. If shipping without the cap or in a tool, the pack is one battery at the Watt hour

rating labeled"Use."

In this example, the battery pack is three batteries with 40Watt hours each when using the cap.

Otherwise, the battery pack is one battery with 120Watthours.

Example battery pack label:

USE: 120Wh SHIPPING: 3x 40Wh

READ ALL INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS FOR ALL

BATTERY PACKS



WARNING:Read all safety warnings, instructions, and cautionary markings for the battery pack, charger and

product. Failure to follow the warnings and instructions may result in electric shock, fire and/or seriousinjury.

• Do not charge or use the battery pack in explosive atmospheres, such as in the presence of flammable liquids, gases or

dust. Inserting or removing the battery pack from the charger may ignite the dust orfumes.

• NEVER force the battery pack into the charger. DO NOT modify the battery pack in any way to fit into a non-compatible

charger as battery pack may rupture causing serious personal injury. Consult the chart at the end of this manual for

compatibility of batteries andchargers.

• Charge the battery packs only in DeWALT chargers.

• DO NOT splash or immerse in water or otherliquids.

• DO NOT allow water or any liquid to enter batterypack.

• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 104°F (40°C)

(such as outside sheds or metal buildings in summer). For best life store battery packs in a cool, drylocation.

BATTERIES AND CHARGERS

The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions

below and then follow charging proceduresoutlined. When ordering replacement battery packs, be sure to include the catalog

number andvoltage.

DCB1112

20V Max*/FLEXVOLT

®

12 Amp Fast Charger

Chargeur rapide 12 A 20 V max*/FLEXVOLT

®

Cargador Rápido de 12 Amps 20V Máx*/FLEXVOLT

®

Fuel Gauge Indicators/Fauge de carburant/Indicador de combustible

75–100% charged

Chargé de 75 à 100 %

75–100% cargada

51–74% charged

Chargé de 51 à 74 %

51–74% cargada

< 50% charged

Chargé de < 50 %

< 50% cargada

Pack needs to be charged

Le bloc-piles doit être rechargé

La batería tiene que cargarse

Fig. B

Fig. A

NOTE: Do not store the battery packs in a tool with the trigger switch locked on. Never tape the trigger switch in the

ONposition.

• Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can

explode in a fire. Toxic fumes and materials are created when lithium-ion battery packs areburned.

• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F

(130°C) may causeexplosion.

• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range

specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and

increase the risk offire.

• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid

gets into the eye, rinse water over the open eye for 15minutes or until irritation ceases. If medical attention is needed, the battery

electrolyte is composed of a mixture of liquid organic carbonates and lithiumsalts.

• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek

medicalattention.

• Battery liquid may be flammable if exposed to spark orflame.

• Never attempt to open the battery pack for any reason. If the battery pack case is cracked or damaged, do not insert

into the charger. Do not crush, drop or damage the battery pack. Do not use a battery pack or charger that has received a sharp

blow, been dropped, run over or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on). Damaged battery

packs should be returned to the service center forrecycling.

Storage Recommendations

The best storage place is one that is cool and dry, away from direct sunlight and excess heat or cold. Store the fully charged

battery pack out of thecharger.

Battery Pack Cleaning Instructions

Dirt and grease may be removed from the exterior of the battery pack using a cloth or soft non‑metallic brush. Do not use water

or any cleaningsolutions.

Fuel Gauge Battery Packs (Fig.B)

Some battery packs include a fuel gauge. When the fuel gauge button is pressed and held, the LED lights will indicate the

approximate level of charge remaining. This does not indicate tool functionality and is subject to variation based on product

components, temperature, and end‑userapplication.

Transportation



WARNING:Fire hazard. Do not store, carry, or transport the battery pack so that metal objects can contact

exposed battery terminals. For example, do not place the battery pack in aprons, pockets, tool boxes, product kit boxes,

drawers, etc., with loose nails, screws, keys, coins, hand tools, etc. When transporting individual battery packs, make sure that

the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. NOTE:

Li‑ion battery packs should not be put in checked baggage on airplanes and must be properly protected from short circuits if

they are in carry‑onbaggage.

Fig. C

Charging Indicators / Indicateurs de charge / Indicadores de carga

Stage 1 Charging / Chargement de stade 1 / Carga Etapa 1

Stage 2 Charging / Chargement de stade 2 / Carga Etapa 2

Fully Charged / Bloc‑piles Chargé / Unidad Cargada

Hot/Cold Pack Delay / Suspension de Charge Contre

leChaud/Froid / Retraso por Unidad Caliente/Fría

Intended Use

The DCB1112 battery charger is designed to charge DeWALT 20V Max* Lithium‑ion and FLEXVOLT® battery packs. This charger

requires no adjustment and is designed to be as easy as possible to operate. Simply place your battery pack into a receptacle of a

plugged‑in charger and it will automatically charge thepack.



WARNING:Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in

electric shock, fire and/or seriousinjury.

a

WARNING: To reduce the risk of injury, read the tool instructionmanual.

The label on your battery or charger may include the following symbols. The symbols and their definitions are asfollows:

V ......................... volts

Hz .......................hertz

min .....................minutes

or DC ......direct current

......................Class I Construction (grounded)

A .........................amperes

W ........................watts

Wh ......................watt hours

Ah .......................amp hours

or AC ...........alternating current

or AC/DC .... alternating or direct current

......................Class II Construction (double insulated)

......................earthing terminal

.....................safety alert symbol

..................... visible radiation–do not stare into the light

..................... r

ead all documentation

.....................

do not expose to rain

ENGLISH

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of

personal injury or propertydamage.



DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.



WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.



CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.



(Used without word) Indicates a safety relatedmessage.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-800-4-DeWALT

Instruction Manual

Guide D’utilisation

Manual de instrucciones

DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286

(APR24) Part No. NA485679 DCB1112 Copyright © 2019, 2024 DeWALT

The following are trademarks for one or more DeWALT power tools: the yellow and black color scheme; the “D” shaped air intake

grill; the array of pyramids on the handgrip; the kit box configuration; and the array of lozenge‑shaped humps on the surface of

the tool.

Product specificaties