SkyRC D200 Handleiding

SkyRC Batterij-oplader D200

Lees hieronder de 📖 handleiding in het Nederlandse voor SkyRC D200 (32 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32

SkyRC Technology Co., Ltd. 2015 Version 1.0

Soldering Station

AC/DC Dual Balance Charger

TABLE OF CONTENTS

INTRODUCTION

SPECIAL FEATURES

WARNING AND SAFETY NOTES

PROGRAM FLOW CHART

OPERATION

OPERATING PROGRAM

CHARGING PROGRAM

BATTERY MEMORY SET AND CALL OUT

SYSTEM SETTING

BATTERY METER

BATTERY RESISTANCE METER

SOLDERING IRON

WARNING AND ERROR MESSAGE

USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER”

SPECIFICATION

CONFORMITY DECLARATION

COMMONLY USED TERMS

WARRANTY AND SERVICE

Congratulations on your choice of SKYRC D200 AC/DC Dual Balance

Charger/Discharger. This unit is simple to use, but the operation of a

sophisticated automatic charger such as SKYRC D200 does require some

knowledge on the part of the user. These operating instructions are designed to

ensure that you quickly become familiar with its functions. It is therefore

important that you read right through the Operating Instructions, Warning and

Safety Notes before you attempt to use your new charger for the first time. We

hope you have many years of pleasure and success with your new battery

charger.

SKYRC D200 is a twin-channel charger with two independent circuits which

can charge two different kinds of batteries simultaneously. It also supports

power distribution in AC mode to make full use of the power when charging a

small battery in one channel and allocate all remaining power to charge another

big battery pack. What’s more, users could set the terminal voltage by

themselves and connect it to PC for PC control and firmware upgrade. Besides

that, users could also use it as Lithium Battery Meter and Battery Internal

Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit,

Temperature Threshold and Processing Time Limit which makes the charger

safe to use.

SKYRC D200 is a high-performance, micro processor control charge/discharge

station with battery management suitable for use with all current battery types,

with integral equalizer for six-cell Lithium-Polymer (LiPo), Lithium iron

phosphate(LiFe) and Lithium-Ion (LiIon) batteries; maximum 20A charge

current and maximum 200W charge power. The additional LiHV mode is able to

charge the new generation of LiPo batteries with an end of charge voltage

4.35V.

Additionally, it has a built in soldering iron that can heat up to 450 . With heavy ℃

duty 60W, the temperature is adjustable from 200-450 .℃

Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY

NOTES before you use the charger for the first time.

It can be dangerous to mis-handle batteries and battery chargers, as there is

always a risk of batteries catching fire and exploding.

INTRODUCTION

01 ·D200

Product specificaties

Merk:	SkyRC
Categorie:	Batterij-oplader
Model:	D200
Kleur van het product:	Grijs
Ingebouwd display:	Ja
Gewicht:	1260 g
Breedte:	197 mm
Diepte:	182 mm
Hoogte:	71 mm
Soort:	Batterijlader voor binnengebruik
Aantal per verpakking:	1 stuk(s)
Compatibele batterij technologiën:	Lithium Polymer (LiPo), Nickel-Cadmium (NiCd), Lithium-Ion (Li-Ion), Nickel-Metal Hydride (NiMH)
Oplaadstroom:	0.1 - 20A