Skandika Florenz 6 Handleiding

Skandika Tent Florenz 6

Lees hieronder de 📖 handleiding in het Nederlandse voor Skandika Florenz 6 (2 pagina's) in de categorie Tent. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
- 1 -
www.skandika.de
Skandika FLORENZ 6
Modell 2008
Wir freuen uns, dass Sie sich für ein Skandika-Zelt entschieden haben.
Es bietet Ihnen viel Platz und Komfort in bekannt hoher Skandika-Qualität.
Bauen Sie das Zelt sicherheitshalber vor dem Urlaub einmal zu Hause auf.
Aufbauanleitung
Bitte gehen Sie Punkt für Punkt vor, die Reihenfolge ist wichtig.
Gestänge und Zubehör: Entfernen Sie den kompletten Inhalt aus der
Zelt-Tasche.
Stecken Sie alle Zeltstangen vorsichtig zusammen. Jede Zeltstange
ist farbig markiert entsprechend den zugehörigen Gestängekanälen
am Außenzelt.
Breiten Sie die Zeltbodenunterlage und das Außenzelt auf einem mög-
lichst glatten und sauberen Untergrund aus.
Außenzelt
Führen Sie jede Stahlstange durch jeden zur nummerierten Zeltstange
passenden Gestängekanal.
Die montierten Stahlstangen verbinden Sie mit dem freien Ende der
angrenzenden schwarzen Plastik-Ellbogen auf beiden Seiten.
Sichern Sie alle Stahlstangen am unteren Ende des Außenzelts mit
den Pins an der unteren Kante des Außenzelts.
Führen Sie die kleinste Aluminiumstange durch den Gestängekanal an
der Seitentür. Stecken Sie jedes Ende in den schwarzen Plastikhalter.
Das Sonnensegel sollte nun vom Außenzelt abstehen.
Stellen Sie sicher, dass die Abspannseile sicher an den Abspannseil-
schlaufen des Außenzelts befestigt sind und befestigen Sie das
entgegengesetzte Ende im Boden. Justieren Sie die Spannung der
Abspannseile durch Verschieben der Spannungseinsteller entlang der
Abspannseile bis Sie fest sind.
Es gibt einen herausnehmbaren wasserdichten Boden für das Außen-
zelt. Legen Sie ihn einfach im Inneren des Zeltes aus und befestigen
Sie ihn an den Ecken.
Sie können jetzt das Außenzelt als frei stehendes Schutzdach benut-
zen.
Innenzelte
Bringen Sie das Innenzelt innerhalb des aufgestellten Außenzeltes an
die passende Stelle.
Beginnend von der Rückseite des Innenzeltes befestigen Sie die
Ecken entlang der unteren Kante des Außenzeltes.
Haken Sie das Innenzelt an der Unterseite des Außenzeltes ein begin-
nend von der unteren Rückseite and arbeiten Sie sich nach vorne vor
unter Benutzung der Clips auf der Außenwand des Innenzeltes and
den entsprechenden Ringen an der Unterseite des Außenzeltes.
Wiederholen Sie die oberen Schritte für den Rest der Innenzelte – Sie
können einige Innenzelte weglassen um die Wohn- oder Lager äche
zu erhöhen und Gewicht zu sparen.
Achtung
Skandika-Zelte zeichnen sich durch einen leichten Aufbau aus. Emp nden
Sie einen Aufbauschritt als schwergängig, wenden Sie keine Gewalt an,
sondern machen Sie den Fehler aus ndig.
P ege
Das Zelt muss beim Aufbau und Zusammenfalten völlig trocken sein.
Ansonsten besteht Verschimmelungs- und Verrottungsgefahr.
Heringe und Nägel sollten immer getrennt von Außen- und Innenzelt
verpackt werden.
Die Bodenwanne des Innenzeltes sollte vor dem Zusammenfalten
gereinigt werden.
Schmutz an der Zeltwand entfernen Sie bitte ausschließlich mit einem
weichen Schwamm und klarem Wasser. Verwenden Sie keine Reini-
gungsmitte, da diese der Imprägnierung schaden können.
Ziehen Sie Heringe und Nägel nicht an den Ringen bzw. Abspannlei-
nen aus dem Boden.
- 2 -
Thank you for choosing your new tent from the Skandika range. It pro-
vides you with a lot of room and high level of comfort in the well-known
superior quality of Skandika.
Before you go on holiday with the new tent, please built it once.
Assembly instructions
Please follow these instructions point by point in the given order.
Poles and components: Remove all contents from tent bag
Extent all tent poles carefully. Each pole end is colored to match the
part of the tent that it belongs to.
Unfold inner tent and rain y and lay on ground
Rain Fly
Insert each steel pole through each sleeve channels according to
numbered poles.
Assembled steel poles into the free end of the adjacent black plastic
elbow on both sides.
Secure all steel poles to the bottom of the rain y using the pins found
along the bottom edge of the rain y.
Insert the smallest alu. pole through the pole sleeve located on the
side door? Insert each end into the black plastic holder? The awning
should stand out from the rain y taught.
Ensure that the guy ropes are secure to the guy rope tabs on the rain
y and stake the opposite ends of the guy ropes into the ground? Ad-
just the tension of the guy ropes by sliding the tension adjusters along
the guy ropes until they are taught.
There is a removable tub style water proof oor for the rain y? Simply
lay it out on the inside of the tent and stake it down at the comers.
You can now use the rain y as a free standing shelter.
Inner tents
Take an inner tent inside the assembled rain y to its appropriate
location.
Starting from the rear of the inner tent, stake down the corners along
the bottom edge of the rain y.
Hook the inner tent to the underside of the rain y starting from the
bottom rear and work your way forward to the top using the toggles on
the outer wall of the inner tent and loops running along the underside
of the rain y.
Repeat the above steps for the rest of the inner tents – you can leave
some of the inner tents out to increase the living or storage capacity
and to reduce the travel weight of the whole tent.
Attention
Skandika tents are very easy to pitch. If one step of the assembly seems
dif cult, don‘t use force, but locate the error.
Care
When packing the tent make sure that it is completely dry, otherwise
there is a danger of mildew and rotting.
Always pack poles and tent pegs separately from inner and outer tent.
Prior to folding, clean the basement of the inner tent.
Use a soft sponge and clear water only to clean the outer tent canvas.
Don‘t use any cleaning agent, for they may be harmful to the imp-
regnation.
Never pull tent pegs out by means of rings or tensioning ropes.
Nous nous réjouissons que vous ayez choisi une tente SKANDIKA. Ces
tentes offrent beaucoup d’espace et de confort et ceci en qualité supéri-
eure marque Skandika.
Pour ne pas courir de risques nous vous conseillons de faire un essai de
montage de la tente avant de partir en vacances.
Montage
Veuillez procéder point par point, l’ordre des différentes étapes est impor-
tant.
Tiges et accessoires : sortez le contenu complet du sac de tente
Assemblez prudemment toutes les barres de tente. Chaque barre est
marquée par une couleur correspondant à la couleur des fourreaux
sur la tente extérieure.
Ètalez le tapis de sol de la tente et la tente extérieure sur un sol lisse
et autant que possible propre.
Tente extérieure
Insérez chaque tige en acier numérotée dans les fourreaux de la tente
correspondants.
Reliez les tiges en acier montées avec le bout libre des coudes adja-
cents en plastique noir des deux côtés.
Sécurisez toutes les barres dans le bas de la tente avec les pins (gou-
pilles) se trouvant sur le bord inférieur de la tente extérieure.
Insérez les petites tiges en aluminium dans les fourreaux de la porte.
Fixez chaque bout dans le support en plastique noir. La marquise est
ainsi en place.
Assurez-vous que les cordes d‘ancrage sont bien xées sur les bouc-
les prévues à cet effet sur la tente extérieure et encrez l‘autre bout
dans le sol. Ajustez la tension des cordes en déplaçant le mécanisme
de tension le long de la corde jusqu‘à ce qu‘elles soient bien tendues.
Il y a un tapis de sol imperméable et amovible pour la tente extérieure.
Étalez-le à l‘intérieur de la tente et xez-le par les coins.
Vous pouvez maintenant utiliser la tente extérieure comme auvent
autonome.
Tentes intérieures / Cabines
Installez convenablement la cabine à l‘endroit prévu pour celle-ci à
l‘intérieur de la tente.
En commençant par l‘arrière de la cabine accrochez les coins le long
du bord inférieur de la tente extérieure.
Accrochez la cabine au dessous de la tente extérieure, en commen-
çant par le fond, travaillez de l’arrière vers l‘avant en utilisant les clips
sur la paroi extérieure de la cabine et les anneaux correspondants sur
l’intérieur de la toile extérieure.
Répétez les étapes précédentes pour les autres cabines – vous pou-
vez ne pas accrocher toutes les cabines pour augmenter la surface du
séjour ou de stockage ou pour diminuer le poids de la tente.
Attention
Les tentes Skandika sont très faciles à monter. En cas de dif culté ne
forcez pas mais cherchez la raison possible et la solution à la dif culté
avant de continuer.
Entretien
Lors du démontage et pliage, prendre le temps de sécher chaque
élément a n d’éviter toute moisissure et décomposition.
Toujours ranger les pointes et sardines séparément des toiles intéri-
eures et extérieures.
Nettoyer le fond de la tente intérieure avant de la plier.
Nettoyer d’éventuelles salissures sur la tente à l’aide d’un linge doux
et de l’eau claire. Ne pas utiliser de détergent car ceci pourrait détéri-
orer l’enduction protectrice.
Ne pas tirer sur les cordes d’ancrage pour extraire les sardines et
pointes du sol.


Product specificaties

Merk: Skandika
Categorie: Tent
Model: Florenz 6

Heb je hulp nodig?

Als je hulp nodig hebt met Skandika Florenz 6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tent Skandika

Handleiding Tent

Nieuwste handleidingen voor Tent