SE Electronics RF-X Handleiding

SE Electronics Microfoon RF-X

Lees hieronder de 📖 handleiding in het Nederlandse voor SE Electronics RF-X (3 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

REFLEXION FILTER® X A S S E M B LY + U S E

RF-X ASSEMBLY MANUAL

sE Electronics RF-X Assembly + Use

Thank you for purchasing an sE Electronics RF-X! We hope it helps make your

tracks sound great - no matter WHERE you’re recording.

STEP ONE

The rst step is to attach the hardware to

the stand, which is done by screwing the

bracket onto the top of a mic stand, where

the mic or shockmount normally attaches.

*There’s an adapter screwed

inside this connector for a

European mic thread size - if

you remove the adapter, the

connector will t US mic stands.

Use the lever on top of the L bracket

to tighten it, but not too tight, as you’ll

probably need to shift it slightly later.

STEP TWO

Next, attach the lter to the vertical portion

of the L bracket by inserting the two included

screws through the vertical cutout in the L

bracket, and into the two screw holes on the

back of the RFX.

RF-X ASSEMBLY MANUAL

sE Electronics RF-X Assembly + Use

STEP THREE

Your microphone, in a shockmount or a clip,

will attach to the hardware with the included

standoff.

You can now play with the horizontal

positioning of the mic, and the height of

the RFX, to get the optimum position for

recording.

The ideal placement for your microphone is where the mic’s capsule is approximately

even with the front edge of the RFX, and centered vertically with the lter – but some

mics sound better when pushed a little closer, and some a little further away.

Once you’ve found a good position for the mic and lter, you can loosen the lever on top

of the mic stand mount to move the lter and mic assembly forward or back – this way,

you can position it so its center of gravity is balanced directly above the mic stand.

Thank you for being an sE customer - enjoy your new RF-X!

Fo r m o r e i n f o r m a t i o n , a n d t o r e g i s t e r f o r y o u r e x t r a y e a r

o f w a r r a n t y, p l e a s e v i s i t s e e le c t r o n i cs . c o m.

Product specificaties

Merk:	SE Electronics
Categorie:	Microfoon
Model:	RF-X
Kleur van het product:	Grijs
Materiaal:	Aluminium, Foam
Merkcompatibiliteit:	Alle merken
Aantal:	1
Type product:	Microfoon-windscherm