SE Electronics X1 A Handleiding

SE Electronics Microfoon X1 A

Lees hieronder de 📖 handleiding in het Nederlandse voor SE Electronics X1 A (20 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

X1 A

U s e r M a n u a l

User Manual - EN

Thank you

We would like to thank you cordially for choosing this sE microphone! This manual contains some

important instructions for setting up and operating your new equipment. Please take a few minutes

to read the instructions below carefully. We hope you will enjoy working with it as much as we

enjoyed designing and building it for you.

Most Sincerely,

Your sE Team

Brief Description

The X1 A is high quality condenser microphone intended for a wide range of studio applications,

from vocals to drums to acoustic instruments and beyond. Thanks to its custom design and

carefully-selected capsule, it delivers pristine sound quality and an even, well-balanced frequency

response.

The electronics and the switchable attenuation pad ensure a high dynamic range, with high sound

pressure level (SPL) handling capability and extremely low-noise components. The switchable low

cut filter eliminates rumble or footfall noise, and can also compensate for an excess of bass

frequencies caused by the proximity effect. This enables the X1 A to close-mic many instruments

including electric guitar speaker cabinets, brass instruments and drums.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by

the roadworthy all-metal design, robust construction, and high quality manufacturing standards.

What’s in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE

Electronics dealer and let them know.

 X1 A microphone

 microphone stand clip

 thread adapt er

Controls

The X1 A features a switch for the attenuation pad and a switch for the low-cut filter.

Attenuation Switch

The is located on the front-left side of the Attenuation Switch

microphone. When switched on, the incoming signal is

reduced by 20 dB for capturing of loud instruments and/or

close-miking without distortion. Using the switch also helps

prevent overloading the input stage of recording interfaces,

mixing desks and microphone preamps.

Low-Cut Switch

The Low-Cut Switch is located on the front-right side of the

microphone. Wind noise, plosives, footfall noise or rumble

might affect the recorded signal, so enabling the switchable

low cut filter reduces such unwanted noise and prevents

distortion. Additionally, the low cut filter also minimizes the

proximity effect when recording sound sources at a very

short distance.

Powering

In order to ensure proper operation, the microphone requires a phantom power source providing 48

Volts according to IEC 61938.

Risk of damage

Do not connect the microphone to any power supply other than a

phantom power source (input with phantom power or external IEC

standard phantom power supply) with a floating connector, using a

balanced cable with studio grade connectors to IEC 268-12 only. This

is the only way to ensure safe and reliable operation.

Safety and maintenance

Risk of damage

Please make sure that the piece of equipment to which your

microphone will be connected fulfils the safety regulations enforced in

your country and is fitted with a ground lead.

Cleaning the microphone

After every use, clean the microphone with a dry, soft cloth tissue and store it in a solid case or a

zipper pouch.

Technical Specifications

Capsule

2/3“ condenser capsule

Polar patterns

Cardioid

Frequency range

20 20,000 Hz –

Sensitivity

20 mV/Pa - dBV 34

Max. SPL (0.5% THD)

130 / 150 dBSPL (0/20 dB Attenuation pad)

Equivalent noise level

16 dB(A)

Dynamic range

114 / 134 dB (0/20 dB Attenuation pad)

Signal- -noise ratio to

78 dB(A)

Low cut filter

1 Hz, 6 dB/Oct, switchable 00

Product specificaties

Merk:	SE Electronics
Categorie:	Microfoon
Model:	X1 A
Kleur van het product:	Zwart
Hoogte:	169 mm
Soort:	Microfoon voor studio's
Connectiviteitstechnologie:	Bedraad
Diameter:	58 mm
Certificering:	IEC 61938
Aansluiting:	XLR-3
Stroomverbruik:	4 mA
Verpakkingsinhoud:	Swivel mic clip, mic stand thread adapter
Microphone direction type:	Cardioïde
Gevoeligheid microfoon:	-34 dB
Operating voltage:	48 V
Spreekspoel types:	Condensor
Frequentie microfoon:	20 - 20000 Hz
Microphone input impedance:	50 Ohm
Aantal producten inbegrepen:	1 stuk(s)
Gewicht microfoon:	390 g
Microfoon Signal-to-Noise Ratio (SNR):	78 dB
Gevoeligheid (1 kHz):	20 mV/Pa
Aanbevolen belastingsimpedantie:	1000 Ohm
Microphone dynamic range:	134 dB
Dempkussen:	20 dB
Equivalent geluidsniveau:	16 dB
Microphone Total Harmonic Distortion (THD):	0.5 procent
laag-af filter:	100 Hz