Satco S23167 Handleiding
Pagina's 2 Engels Monitor
Bekijk de handleiding van Satco S23167 gratis online of download de PDF. 65 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
HI-PRO LED 277-347V &
277-480V SMART PORT LAMPS
Models: S23160, S23161, S23162, S23163, S23164,
S23165, S23166, S23167, S23168
Satco Products, Inc.
Brentwood, NY 11717
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
© Copyright 2022 Satco Products, Inc. 4/22 v2.0
WARNING: Risk of Fire or Electric Shock
• Luminaire wiring and electrical parts may be damaged when drilling for
installation of LED retrot. Check for enclosed wiring and components.
• LED Retrot installation requires knowledge of luminaires electrical systems.
If not qualied, do not attempt installation. Contact a qualied electrician.
• Install this lamp only in luminaires that have the construction features and
dimensions shown in the photographs and/or drawings and where the input
rating of the retrot does not exceed the input rating of the luminaire.
• Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
• To prevent wiring damage or abrasion, do not expose wiring to edges of
sheet metal or other sharp objects.
• Disable all power to the Luminaire. The lamp holder must be disconnected
from the wiring to the ballast, capacitor, or ignitor. Verify that voltage does not
exceed 480V. NOTE: S23160, S23161 not to exceed 347V. See Wiring Diagram.
• Failure to follow instructions can result in a damaged product and will void
warranty. It could also result in an electric shock or re.
IMPORTANT
• Added weight of the device may cause instability of a free-standing portable luminaire.
• Installers should not disconnect existing wires from lampholder terminals to make
new connections at lampholder terminals. Instead installers should cut existing
lampholder leads away from the lampholder and make new electrical connections
to lampholder lead wires by employing applicable connectors.”
80-954
WiFi Module
80-956
Photocell
INSTALLATION
STEP 1:Turn OFF power before installation.
STEP 2: Remove the old ballast, capacitor
and ignitor (if existing).
STEP 3: Make sure alternating current wires
connect to the socket directly. Reattach or
replace ground lead (if necessary).
STEP 4: Select color temperature on
lamp (Fig. A).
STEP 5: Screw the LED lamp into the
corresponding socket. Attach retrot label
to luminaire.
Optional Hi-Pro Intelligent Interface Accessories:
80-955
Motion Sensor/PIR
80-957
Motion Sensor/MW
Intelligent
interface
port for
accessories
Fig. A: Color
temperature
selection switch
4000K
3000K 5000K
Color Temperature
HPS/HID Wiring DiagramHi–Pro Wiring Diagram
Replacing HPS/HID Lamp
(L1)(L1)
277-480V*
CFL Wiring DiagramHi–Pro Wiring Diagram
277-480V*
(L1)(L1)
277-480V*
Capacitor
CapacitorIgnitor
Ignitor
277-480V*
Replacing CFL Lamp
WIRING DIAGRAM
Item #DescriptionVolts
S2316018W/LED/HID/CCT/E26
277-347
S2316127W/LED/HID/CCT/E26
S2316236W/LED/HID/CCT/E26
277-480
S2316345W/LED/HID/CCT/E26
S23164
36W/LED/HID/CCT/EX39
277-480
S23165
45W/LED/HID/CCT/EX39
S23166
54W/LED/HID/CCT/EX39
S23167
80W/LED/HID/CCT/EX39
S23168
100W/LED/HID/CCT/EX39
*
NOTE: Items S23160 and S23161 may not to exceed 347V.
*
NOTE: Items S23160 and S23161 may not to exceed 347V.
Product specificaties
| Merk: | Satco |
| Categorie: | Monitor |
| Model: | S23167 |
Heb je hulp nodig?
Als je hulp nodig hebt met Satco S23167 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Monitor Satco
Satco S16434 Handleiding Satco S23165 Handleiding Satco S23168 Handleiding Satco S16503 Handleiding Satco S13167 Handleiding Satco S11969 Handleiding Satco S13163 Handleiding Satco S16438 Handleiding
Alle Satco Monitor handleidingen