Saris Hatch Huggers Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Saris Hatch Huggers gratis online of download de PDF. Deze handleiding is 16 keer bekeken. Vraag over dit model? Stel een vraag
Note:See back page for Hatch Hugger vehicle
compatibility list.
THE HATCH HUGGER IS INTENDED FOR:
1) Vehicles with glass or plastic hinge lines that are
currently not recommended for Graber or Saris
carriers with standard S-hooks.
2) Vehicles with narrow gaps around the hatch or trunk
that do not permit placement of standard hooks.
GENERAL COMPATIBILITY REQUIREMENTS:
9Confirm mounting strap can be threaded between
hatch (glass) and vehicle body.
9Confirm that tension on the strap will not deform or
damage vehicle molding or trim.
9Be certain mounting strap is not rubbing against any
sharp metal edges.
9Hatch must have internal metal support frame.
S-hook strap replacement / application:
1Remove S-hook straps from buckles.
2Open vehicle trunk or hatch.
3 Insert end of Hatch Hugger
strap between hatch and
vehicle’s body.
4Be sure there is not interference when hatch/trunk
is closed.
HATCH
5 Close hatch or trunk.
Pull mounting strap to seat Hatch Hugger in place.
STRAP
HATCH
Narrow J-hook strap replacement / application:
· Remove narrow J-hook straps from buckles.
· Open vehicle trunk or hatch.
· Place Hatch Hugger inside trunk, close trunk, and
pull strap until hugger braces against trunk wall.
6 Thread Hatch Hugger straps to carrier buckles.
SPRING BUCKLE
7Be sure to keep straps in line with rear leg to prevent
carrier from shifting.
YES NO NO
8
Continue mounting carrier as instructed in your
owner’s manual.
3 BAR BUCKLE
NO
NARROW J-HOOK
Product specificaties
| Merk: | Saris |
| Categorie: | Niet gecategoriseerd |
| Model: | Hatch Huggers |
Heb je hulp nodig?
Als je hulp nodig hebt met Saris Hatch Huggers stel dan hieronder een vraag en andere gebruikers zullen je antwoorden