RetroSound Dallas M4HD Handleiding

Bekijk gratis de handleiding van RetroSound Dallas M4HD (54 pagina’s), behorend tot de categorie Autoradio. Deze gids werd als nuttig beoordeeld door 80 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over RetroSound Dallas M4HD of wil je andere gebruikers van dit product iets vragen? Stel een vraag

FGH

E

E

L

O

O

K

F

O

R

T

H

E

O

R

A

N

G

E

B

A

G

!

R

A

D

I

O

F

A

C

E

S

C

R

E

W

S

x(2)

Radio Face Quick Start Guide

What’s in the BoxInstallation

Dallas Face

Shafts Adapters

Knobs

Brackets

x(2) x(2)

x(4) x(2)

Hardware

Modern Sound For Your Classic

[email protected] | help.retromanufacturing.com

Refer to the user manual included in your motor box or on our website for more comprehensive instructions.

Plug the ribbon cable from the Radio Motor

into the Radio Face.

Place a small metal spacer on each

control shaft and secure with a shaft nut.

Slide the shafts through the Radio Face

with the shaft’s cord facing out. Plug the

control shafts into the Radio Motor.

NOTE: Use either brackets

J or K as needed.

Place the small black plastic washer and the thin

metal washer onto the shaft, and secure with

the shaft nut using a deep-well socket. DO NOT

OVERTIGHTEN. Finish the assembly by installing

the front and rear knobs.

Install the mounting brackets with

the radio facing you. Attach the

bracket labeled R to the right side

and the bracket labeled L to the

left side. Line up tabs and use

supplied screws to secure the

brackets to the Radio Face.

To use the optional wiring adapters(L)

(if the vehicle has a compatible factory

harness intact), plug the adapters into the

factory wiring harness and match the wiring

color to the color on the adapter that came

with the Radio Motor. Not all wires may be

needed, cap off any unused wires that do

not match the factory harness.

Attach the Radio Face to the Radio Motor using

the four small screws from the orange bag

found in your Radio Face box.

x(2)

x(2)

Note: Use either brackets J

or K as needed.

Note: Not used

for all installations.

x(2) x(2)

AA

J

JJ

B CK

L

D

D

D

I

I

G H

BC

x(4)

F

x(4)

E

F

Product specificaties