QTX PAR100 Handleiding

QTX Verlichting PAR100

Lees hieronder de đź“– handleiding in het Nederlandse voor QTX PAR100 (4 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 57 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
www.avsl.com 154.030UK User Manual
PAR100
3in1 LED PAR Can
Item ref: 4.15 030UK
User Manual
Thank you for choosing the PAR100 A lightweight and compact LED PAR Can fitted with 18 3- -1 RGB , in
LEDs. This unit can be controlled by auto, sound- -light, master/slave programs or via DMX. A great to
value solution for background wash illumination.
In the box:
Your PAR100 should arrive with you in a single carton in good condition. T carton should contain he
1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally Qualified personnel should then .
check the unit before continuing use.
Please read through this manual thoroughly before use, any damage
Cause by misuse of product will be covered by warrantd not y.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 4.030UK User Manual 15
Placement:
• Use the included mounting bracket to fix to a stand or lighting truss
• Keep away from damp or dusty environments
• Ensure adequate airflow around the fixture housings
• Ensure adequate access to controls and connections
Cleaning:
• Use a soft cloth with a neutral detergent to clean the casing as required
• Use a vacuum cleaner to clear ventilation grilles of any dust or de s build-ups bri
• Do not use strong solvents for cleaning the unit
Rear panel controls:
1. Manual control buttons
2. DMX Signal in
3. DMX signal out
4. LED display
5. IEC power in (fused)
6. IEC power out
Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “ ” and “ ”UP DOWN buttons navigate through various setting functioto ns.
P button save the desired setting. ress “ ”ENTER to
Menu
Number range
Function and description
A001
A001-A512
DMX address settings 512
ADYE
ADYE or AD no
DMX512 Master on or off (Slave)
rEYE
rEYE or RE no
Remote control on or off
AU01
AU01-AU07
Manual colour selection
2.
3.
5.
6.
1.
www.avsl.com 4.030UK User Manual 15
FF00
FF00-FF99
Colour jump setting (speed slow to fast)
EE00
EE00-EE99
Colour fade setting (speed slow to fast)
CC00
CC00-CC99
Colour pulse setting (speed slow to fast)
F000
F000-F255
Strobe setting (speed slow to fast)
SOUD
SOUD
Sound to light white strobe setting
SUND
SUND
Sound to light co change setting lour
r000
r000-r255
Red dimming (0-100%)
G000
G000-G255
Green dimming (0-100%)
b000
b000-B255
Blue dimming (0-100%)
Remote control:
The PAR100 is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum
range of approximately 4-5 Controls and functions are listed on the diagram below: m.
DMX mode:
The PAR100 can be controll by DMX signal, simply connect the DMX sig l source to the DMX input on ed na
the unit via balanced XLR lead. Extra fixtures can be controlled by the same X signal by looping a DM
through the DMX out on the To enter DMX mode, select A001 from the menu and co m the correct unit. nfir
start address using the by “UP” “ and DOWN ENTER” “ buttons and ” to confirm .
This unit has 7 DMX channels as indicated in the b l : ta le be ow
Channel
Value
Function
Setting
CH1
0-255
Master dimming (0-100%)
Available in all mod es
CH2
0-255
Red dimming (0-100%)
CH3
0-255
Green dimming (0-100%)
Dimming modes only
CH4
0-255
Blue dimming (0-100%)
CH5
0-255
Strobe (speed slow to fas t)
Available in all modes
CH6
0- 50
Open 1- CH CH5
51-100
Colour select
101-150
Colour jump setting
1. Power = Remote on/off
2. A = Colour jump open/off uto
3. Mode = Colour de open/off fa
4. Flas = Strobe open/ h off
5. -- = Decrease option setting
6. R = Red open/off
7. G = Green open/off
8. Enter = Save option sett ing
9. Music = d to light colour Soun
change open/off
10. Motor = Manual colour select
11. + = Increase option setting
12. Dmx = DMX512 open/off
13. B = Blue open/off
14. W = No function this model on
(achieve white by opening red,
green and blue concurrently)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.

Product specificaties

Merk: QTX
Categorie: Verlichting
Model: PAR100

Heb je hulp nodig?

Als je hulp nodig hebt met QTX PAR100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting QTX

QTX

QTX Recharge Performer Handleiding

4 September 2023
QTX

QTX Wash & Beam Handleiding

4 September 2023
QTX

QTX TetraCube Handleiding

4 September 2023
QTX

QTX BATPAR-18W Handleiding

4 September 2023
QTX

QTX TinyMover Handleiding

4 September 2023
QTX

QTX Recharge DJ Handleiding

4 September 2023
QTX

QTX Multi-Bar Handleiding

4 September 2023
QTX

QTX SpectraWash Handleiding

4 September 2023
QTX

QTX DP4 Handleiding

20 Juni 2023
QTX

QTX MBM-1 Handleiding

18 Juni 2023

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Aveo Engineering

Aveo Engineering Powerburst Daylite Handleiding

27 April 2024
Aveo Engineering

Aveo Engineering Redbaron XP Galactica Handleiding

27 April 2024
Aveo Engineering

Aveo Engineering Maxx Atlas Handleiding

27 April 2024
Aveo Engineering

Aveo Engineering Ultra Embedded Handleiding

27 April 2024
GVM

GVM -PRO-SD300C Handleiding

25 April 2024
GVM

GVM -PD60B Handleiding

25 April 2024
Lucide

Lucide Brackx-LED Handleiding

23 April 2024
Lucide

Lucide Dica LED Handleiding

23 April 2024
Lucide

Lucide Yazoo Led Handleiding

23 April 2024
Lucide

Lucide Dyvor-LED Handleiding

23 April 2024