Phanteks Glacier G30 AORUS Handleiding

Bekijk gratis de handleiding van Phanteks Glacier G30 AORUS (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 25 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over Phanteks Glacier G30 AORUS of wil je andere gebruikers van dit product iets vragen? Stel een vraag

PACKAGENTNT COESF lattrs ck www.Phante.mores veionhecksco

INSTALLATION GUIDE V1.0

gigabyteaorusRtX 3090/3080

GLACIER BACKPLATE

PH-GB3090GBARSBP_BK01/CR01

WARNING - This product is intended for advanced users. Improper installation may result in damage to your equipment. While all eorts

have been made to provide the most comprehensive information possible, Phanteks assumes no liability expressed or implied for any damage(s)

occurring to your components as a result of using Phanteks cooling products, either due to mistake or omission on our part in the below

instructions, or due to failure or defect in the Phanteks cooling products. Do not disassemble the water block. Warranty will be voided.

Turn o the power to your system and discharge your body’s static electric charge before proceeding with the installation procedure. If you do not

feel comfortable with performing the installation procedure, consult a qualied computer technician.

GLACIER BACKPLATE

QTY: 1

This product requires the PH-GB3090GBARS GPU water block. Please follow step 1 to 3 of the GPU

water block’s installation guide before proceeding.

M2.5x8 Flush Screws

QTY: 9

Thermal Pads

QTY: 2

FINISH STEPS 1 TO 3 FROM THE WATER BLOCK INSTALLATION GUIDE BEFORE PROCEEDING:

STEP 4. APPLYING THERMAL PADS

Remove the protective lm and place the

thermal pads on the correct position on

the backplate.

Make sure to remove the protective lm on

both sides of the thermal pads.

1

2

2

3

4

5

1

2

2

3

4

5

1

22

3

45

Product specificaties