Ozito PXSCS-018 Handleiding

Ozito Niet gecategoriseerd PXSCS-018

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXSCS-018 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
STANDARD EQUIPMENT
PXSCS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 2,800/min
Working Width: 280mm
Scarier Roller: 12 Blades
Depth Adjustment: -2/2/4/6mm
Noise Rating: 90dB
Weight: 6.7kg
ozito.com.au
0522
Brushless Scarier
Handle Parts
Handle Assembly Fasteners
BRUSHLESS
SCARIFIER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool or machine has been operated on a supply voltage other than that
specied on the tool or machine.
• If the tool or machine shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool or machine is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cable clips, roller blade, bearings etc.
Cable Clip x 3, Safety Key
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
A
Fitting the Lower Handles
1. Insert the right side lower handle
to the opening on the right side
of the scarier housing. Make
sure that the embossing (A) faces
inwards.
2. Repeat the process with the left
lower handle.
3. Secure both lower handles in
place with a T-bolt.
1. Upper Handle
2. Start/Stop Lever
3. Safety Switch Button
4. Handle Securing Set x 4
5. Cable clip x 3
6. Carry Handle
7. Lower Handle - Right Side
8. Battery Cover
9. Mid Handle Piece x 2
10. Lower Handle - Left Side
11. T-Bolt x 2
12. Depth Adjustment Knob x 2
13. Safety Key
This machine is compatible with all batteries & chargers from the
Ozito Power X Change range.
BRUSHLESS SCARIFIER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5
6
7
9
10
11
12
8
7 109 4 115 13
WARNING! ENSURE THE MACHINE IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Fitting the Mid Handle to the Lower Handles
1. Using a bolt and T-nut from the handle securing set, secure each mid
handle piece to the inside ends of the lower handle. Ensure the bolts t
through the outside of the lower handles and then through the hole in the
mid handle.
Fitting the Upper Handle to the Mid Handles
1. Place the upper handle over each
side of the mid handles. From the
handle securing set, t the bolts
through the outer side of the
upper handle and then through
the hole in the mid handles.
Note: When you t the upper
handle you can decide the height
of the handle by selecting the
appropriate fastening hole. Ensure
you use the same hole on both
sides.
2. Secure in place by screwing the
T-nut over the protruding ends of
the bolts.
I
0
II
III
PRESS
2. PREPARATION
WARNING! ENSURE THE MACHINE IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Securing the Power Cord to the Handle
1. Secure the power cord from
the switch housing to the
scarier using the three
cable clips.
Note: Ensure that the power
cord follows the handle
smoothly from the switch to
the body of the scarier.
Adjusting the Scarifier Working Depth
The scarier depth is adjusted at the two front wheels via the depth
adjustment knob.
1. Pull out the adjusting knob and
turn to the left or right into one of
the available positions.
2. Release the knob, check that it is
securely seated in the required
depth.
Note: The scarier depth must
always be identically set on both front wheels.
Working Depth Positions
0 - Transport position.
I - Scarier depth 2mm.
II - Scarier depth 4mm
III - Scarier depth 6mm
Inserting Battery and Safety Key into the
Scarifier
For best performance use 2.5Ah
battery and above.
1. Open the battery cover and slide
the battery into the scarier,
aligning the ribs so that it clicks
into place.
2. Insert the safety key. (If the
scarier is not going to be used immediately, do not insert the safety key).
3. Carefully close the battery cover.
WARNING! ALWAYS ENSURE THE KEY IS REMOVED
WHEN NOT IN USE.
Removing Battery from the Scarifier
1. Open the battery cover. Press and
hold the battery release tab as
you remove the battery.
2. Carefully close the battery cover.
WARNING! NEVER LEAVE THE BATTERY INSIDE THE
SCARIFIER WHEN NOT IN USE.
Fitting & Removing Grass Catcher (accessory)
This unit does not include a grass catcher. This is available separately.
1. Lift up the catcher ap on the rear of the scarier with one hand and hook
grass catcher onto the housing from above.
2. Lower the catcher ap. The catcher ap is held against the catcher by a
spring.
3. To empty the catcher, lift the catcher ap with one hand, while unhooking
the catcher with the other.
WARNING! ONLY FIT AND REMOVE THE GRASS
CATCHER WHEN THE SCARIFIER IS SWITCHED OFF
AND THE MOTOR HAS COME TO A STOP.
WARNING! WHEN FITTING THE GRASS CATCHER
AFTER EMPTYING, ALWAYS ENSURE THERE IS NO
BUILD UP OF GRASS IN THE GRASS CHUTE.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXSCS-018

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXSCS-018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024
Ozito

Ozito PXDDGK-600U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024