Ozito PXCUSS-018 Handleiding

Ozito Niet gecategoriseerd PXCUSS-018

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXCUSS-018 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
1
2
3
4
5
6
7
8
CORDLESS
UNIVERSAL
SPREADER
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
Hopper Volume: 3.3 litres
Speed Control: 1 - 6
Flow Rate: 1 - 8
Spreading Width: 1.7 - 5m
Max Area Coverage: 15m²
Weight: 1.1kg
PXCUSS-018
STANDARD EQUIPMENT
Cordless Universal Spreader
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE
WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING
YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER
SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer service helpline
above.
ozito.com.au
0519
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way
• Professional, industrial or high frequency use..
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings.
ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. INSERTING & REMOVING THE BATTERY
SETUP & PREPARATION
1. Align the ribs of
the battery with
the recess in the
spreader.
1. Press and hold the
battery release tab
and remove the
battery.
2. Slide the battery in
so that it clicks into
place.
Installing a Battery
Removing a Battery from the Spreader
CORDLESS UNIVERSAL SPREADER
1234
1. Material Flow Rate Adjustment Dial
2. Sure Grip Handle
3. On/Off Trigger
4. Hopper
5. Spreading Wheel
6. Spreading Width Adjustment
7. Electronic Speed Control
8. Battery Seating
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
5 6 7
1
2
3
4
5
6
7
8
8
Note: Ensure battery seating is clear of any residue material before
inserting the battery.
2. CONTROLS
1. Squeeze the On/Off trigger to
start the spreader.
2. To stop the spreader release the
On/Off trigger.
Switching On and Off
1
2
3
4
5
6
7
8
Spreading Width Adjustment
The material throw width can be adjusted for a small area (1.7m wide) up to a
larger area (5m wide) for a wider area of coverage.
1. Adjust inwards for a smaller area of coverage.
Note: The On/Off trigger activates both the spreader wheel and opening for
the spreader material
Electronic Speed Control
1. To achieve the greatest speed
and distance the material is
distributed, move the control to
the highest setting, “6”.
2. To reduce the speed and
distance the material is
distributed, move the control
to a lower speed, or “1” the
lowest setting.
1
2
3
4
5
6
7
8
1
6
Material Flow Rate Adjustment Dial
Note: The dial controls the size of the opening for material ow rate.
3
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
1. Set a low ow rate for smaller
quantities and increase the ow
rate for larger quantities.
Setting “1” smallest (opening), setting
“8” largest (opening).
Note: Numerous variable factors (such as walking speed, working height,
motor speed etc.) do not allow a specic recommendation of the spreading
setting. Rather, the optimal setting must be determined by the user when
starting with the work.
2. Adjust outwards for a wider area of coverage.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXCUSS-018

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXCUSS-018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024
Ozito

Ozito PXDDGK-600U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024