Ozito PXPPK-2520 Handleiding
Ozito
Heggenschaar
PXPPK-2520
Lees hieronder de đ handleiding in het Nederlandse voor Ozito PXPPK-2520 (12 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
CORDLESS
POLE PRUNER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Bar Length: 200mm
Chain Speed: 5.5m/s
Oil Tank: 70ml
Chain Pitch: 9.53mm (3/8â)
Extension Pole: 830mm
Length Min/Max.: 2.07/2.90m
Weight: 3.0kg
PXPPS-1820
STANDARD EQUIPMENT
Pruner Head
ozito.com.au
Extension Tube
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, bar,
chain, blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
⢠If the tool has been operated on a supply voltage other than that speciîed
on the tool.
⢠If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the instruction manual.
⢠If the tool is disassembled or tampered with in any way.
⢠Professional, industrial or high frequency use.
The beneîts provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
Bar & Chain
Rear Handle Tube
Shoulder Strap, Bar &
Chain Cover
Multi-Tool
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
WARNING! ENSURE THE MACHINE IS SWITCHED OFF
AND BATTERY IS DISCONNECTED BEFORE PERFORMING
ANY OF THE FOLLOWING TASKS.
ACCESSORIES
1
13
2
3
4
15
6
7
8
1. Chain
2. Guide Bar
3. Pruner Head
4. Lock Nut
5. Extension Tube
6. Top Handle
7. Shoulder Strap Retainer
8. Sure Grip Handle
9. Oil Tank Cap
10. Chain Sprocket Cover
11. Cover Bolt
12. Safety Switch
13. Battery Seating
14. On/Off Trigger
15. Chain & Bar Cover
16. Shoulder Strap
17. Multi-Tool
CORDLESS POLE PRUNER
WARNING! THE CHAIN HAS SHARP EDGES, FOR YOUR
OWN SAFETY, PLEASE USE WORK GLOVES. NEVER
TOUCH THE CHAIN OR SERVICE THE UNIT WITH
BATTERY CFITTED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
4
14
12
1716
5
7
Fitting the Guide Bar & Chain
1. Loosen the cover bolt with the supplied Multi-Tool and remove chain
sprocket cover together with the cover bolt.
9 1110
Cutter
2. Place the chain in the groove of the guide bar as shown. Refer to the
image printed on the guide bar that indicates the direction that the
chain should face.
WARNING! IF THE CHAIN IS INSTALLED BACKWARDS
(CHAIN CUTTERS FACING IN THE OPPOSITE DIRECTION
OF ROTATION) THE POLE PRUNER WILL VIBRATE
EXCESSIVELY AND NOT CUT.
3. Place the guide bar and
chain in position, ensuring
that the chain is around
sprocket (A). Also ensure
that the pin (B) îts into the
central slot in the guide bar.
4. Pull the guide bar forward
until the chain is closely
seated. Make sure that all
the drive links are in the
groove of the bar.
5. Reattach the chain sprocket
cover and înger-tighten
the cover bolt. Only tighten
the cover bolt securely
once the chain tension
has been adjusted. (see
Tensioning the Chain).
AB
33
The pole hedge trimmer can be used either with or without the
extension tube.
Fitting the Tubes
⢠Assembly without Extension Tube
1. Make sure the motor head and the rear handle are in the correct
orientation. Push the tube of the motor head into the tube of the rear
handle, aligning the Tab with the Recess as you do so. Push both
halves together until it will not go any futher.
RECESSTAB
Note: The two parts
can only be îtted in
the correct orientation.
Do not force the parts
together.
2. To secure the two parts
together, slide the
lock nut to the hread
and screw tight. To
dismantle, proceed in
reverse order.
Note: The locking and unlocking directions
are indicated on the lock nut.
1. Loosen the cover bolt with
the supplied Multi-Tool.
Do not remove the chain
sprocket cover.
Tensioning the Chain
WARNING! THE CHAIN HAS SHARP EDGES, FOR YOUR
OWN SAFETY, PLEASE USE WORK GLOVES. NEVER
TOUCH THE CHAIN OR SERVICE THE UNIT WITH
BATTERY FITTED.
33
WARNING! IF YOU TRY TO ADJUST THE CHAIN TENSION
WHILTS THE COVER BOLT IS TIGHT, IT WILL RESULT IN
THE CHAIN NOT LOOSENING AND POSSIBLE DAMAGE TO
THE MECHANISM.
2. Adjust the chain tension by
turning the chain tension
screw with the supplied
Multi-Tool. Turning the
tension screw CLOCKWISE
increases the chain tension,
turning it COUNTER-
CLOCKWISE decreases the
chain tension.
3. For the correct chain tension,
îrmly pull up on the chain at
the middle of the top of the
exposed guide bar. When
the chain is pulled up to its
highest point, the bottom tip
of the links should only just
stay in the track [middle of
the guide bar].
4. After the chain has been
accurately tensioned, Tighten
the cover bolt to lock the guide
bar in place.
5. Check the tension again after a few minutes of cutting and several times in
the îrst hour because the chain will lengthen as it breaks in. Adjust as you
go. A loose chain causes rapid wear to both the chain and the guide bar and
could derail causing a major safety hazard.
Taking the time to make adjustments to the chain will result in improved
performance and prolonged chain life.
33
Product specificaties
| Merk: | Ozito |
| Categorie: | Heggenschaar |
| Model: | PXPPK-2520 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXPPK-2520 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Heggenschaar Ozito
8 April 2024
27 Augustus 2023
27 Augustus 2023
18 Juni 2023
13 Juni 2023
7 Juni 2023
6 Juni 2023
30 Mei 2023
19 Mei 2023
13 Mei 2023
Handleiding Heggenschaar
- Heggenschaar Bosch
- Heggenschaar DeWalt
- Heggenschaar Karcher
- Heggenschaar WOLF-Garten
- Heggenschaar Al-ko
- Heggenschaar Atika
- Heggenschaar Batavia
- Heggenschaar Bavaria
- Heggenschaar Black Decker
- Heggenschaar Brandson
- Heggenschaar Budget
- Heggenschaar Dolmar
- Heggenschaar Echo
- Heggenschaar Efco
- Heggenschaar Einhell
- Heggenschaar Ferm
- Heggenschaar Ferrex
- Heggenschaar Florabest
- Heggenschaar Flymo
- Heggenschaar Fuxtec
- Heggenschaar Gamma
- Heggenschaar Garden Feelings
- Heggenschaar Garden Groom
- Heggenschaar Gardena
- Heggenschaar Gardenline
- Heggenschaar Gartenmeister
- Heggenschaar Greenworks
- Heggenschaar Grizzly
- Heggenschaar Gude
- Heggenschaar Hanseatic
- Heggenschaar Hikoki
- Heggenschaar Hitachi
- Heggenschaar Hoberg
- Heggenschaar Homelite
- Heggenschaar Honda
- Heggenschaar Husqvarna
- Heggenschaar Hyundai
- Heggenschaar Kaaz
- Heggenschaar Kibani
- Heggenschaar Kingcraft
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Lux Tools
- Heggenschaar Makita
- Heggenschaar McCulloch
- Heggenschaar Metabo
- Heggenschaar Milwaukee
- Heggenschaar Mr Gardener
- Heggenschaar Parkside
- Heggenschaar Pattfield
- Heggenschaar Powerpeak
- Heggenschaar Powerplus
- Heggenschaar Remington
- Heggenschaar Robust
- Heggenschaar Ryobi
- Heggenschaar Scheppach
- Heggenschaar Shindaiwa
- Heggenschaar Skil
- Heggenschaar Sterwins
- Heggenschaar Stiga
- Heggenschaar Stihl
- Heggenschaar Tanaka
- Heggenschaar Tel Sell
- Heggenschaar Texas
- Heggenschaar Toledo
- Heggenschaar Topcraft
- Heggenschaar Trotec
- Heggenschaar Varo
- Heggenschaar Vonroc
- Heggenschaar Worx
- Heggenschaar Yardforce
- Heggenschaar Zipper
- Heggenschaar Black And Decker
- Heggenschaar Cocraft
- Heggenschaar Meec Tools
- Heggenschaar Cotech
- Heggenschaar Fieldmann
- Heggenschaar McGregor
- Heggenschaar Sun Joe
- Heggenschaar Challenge
- Heggenschaar Cramer
- Heggenschaar EGO
- Heggenschaar Grouw
- Heggenschaar Gtech
- Heggenschaar Maruyama
- Heggenschaar Sovereign
- Heggenschaar Craftsman
- Heggenschaar Verto
- Heggenschaar G-Technology
- Heggenschaar Jonsered
- Heggenschaar Qualcast
- Heggenschaar Baumr-AG
- Heggenschaar Martha Stewart
- Heggenschaar Mac Allister
- Heggenschaar Deltafox
- Heggenschaar Palmera
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
Nieuwste handleidingen voor Heggenschaar
8 April 2024
16 Maart 2024
16 Maart 2024
12 Maart 2024
9 Maart 2024
27 Februari 2024
7 Februari 2024
24 Januari 2024
12 Januari 2024
12 Januari 2024