Ozito PXCPHTS-018U Handleiding

Ozito Heggenschaar PXCPHTS-018U

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXCPHTS-018U (3 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
size 445 x 210 mm
Danger! - Read the operating instructions to re-
duce the risk of inquiry
Wear safety goggles, a face guard and ear
protection.
Protect the equipment from rain and damp.
Maximum cutting length of the pole-mounted
pruner.
Wear sturdy, non-slip footwear.
Watch out for falling and catapulting parts.
Keep your distance.
PXCPHTS-018U
GB Additonal operating & safety instructions Cordless Pole Hedge Trimmer
Service information
We have competent service partners in all countries named on the guarantee certicate whose contact
details can also be found on the guarantee certicate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Blade guide, Battery
Consumables* Blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-
se ensure that you provide a precise description of the problem and answer the following questions in all
cases:
• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Gao/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Module Engine PXCPHTS-018U / Module Hedge Trimmer PXCPHTS-018U /
Fast Charger PXCG-030U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Noti ed Body:
Noti ed Body No.:
Reg. No.:
X 2000/14/EC_2005/88/EC
X Annex V
Annex VI
Noise: measured L WA = 98,23 dB (A); guaranteed LWA
= 102 dB (A)
P = KW; L/Ø = cm
Noti ed Body:
2012/46/EU
Emission No.:
Standard references: EN 60745-1; EN ISO 10517; EN 60335-1;
EN 60335-2-29; EN 62233; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3;
Landau/Isar, den 29.08.2016
First CE: 16 Archive-File/Record: NAPR015120
Art.-No.: 34.108.26 I.-No.: 11016 R. GehardDocuments registrar:
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Declaration of conrmity
Wear safety gloves.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
Beiblatt_PXCPHTS_018U.indd 1 29.08.2016 16:47:03
size 445 x 210 mm
Charger indicator / Fast Charger
Indicator status Explanations and actions
Red LED Green LED
O Flashing Ready for use
The charger is connected to the mains and is ready for use; there is no
battery pack in the charger
On O Charging
The charger is charging the battery pack in quick charge mode.
O The battery is 85% -100% charged and ready for use.On
(Charging time for 1.5 Ah battery: 30 min)
(Charging time for 2.0 Ah battery: 40 min)
(Charging time for 3.0 Ah battery: 60 min)
(Charging time for 4.0 Ah battery: 80 min)
(Charging time for 5.2 Ah battery: 105 min)
Action:
Take the battery pack out of the charger. Disconnect the charger from
the mains supply.
Flashing O Adapted charging
The charger is in gentle charging mode.
For safety reasons the charging is performed less quickly and takes
more than 1 hour. The reasons can be:
- The battery pack has not been used for a very long time or an already
at battery was further discharged (exhaustive discharge).
- The battery pack temperature is outside the ideal range (between 25°
C and 45° C).
Action:
Wait for the charging to be completed; you can still continue to charge
the battery pack.
Flashing Flashing Fault
Charging is no longer possible. The battery pack is defective.
Action:
Never charge a defective battery pack.
Take the battery pack out of the charger.
On On Temperature fault
The battery pack is too hot (e.g. due to direct sunshine) or too cold
(below 0° C).
Action:
Remove the battery pack and keep it at room temperature (approx. 20°
C) for one day .
Items supplied
Please check that the article is complete as
specied in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
• Open the packaging and take out the equip-
ment with care.
• Remove the packaging material and any
packaging and/or transportation braces
(if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for
transport damage.
• If possible, please keep the packaging until
the end of the guarantee period.
Battery and charger sold separately.
This tool is compatible with all 18V battery and
chargers from the Power X Change range.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suocating!
Proper use
Hedge trimmer
The hedge trimmer mounting kit is allowed to be
used only on the supplied motor head.
Caution! This hedge trimmer is suitable for cutting
hedges, bushes and shrubs. Caution! Do not use
this equipment to cut grass.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Cutter bar length: ................................... 450 mm
Max. cutting length: ................................ 400 mm
Tooth spacing: .......................................... 16 mm
Cuts/min: ..................................................... 1700
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with ISO 22868.
LpA sound pressure level 81.05 dB(A) ...................
KpA uncertainty 3 dB ..............................................
LWA
sound power level measured 98.23 dB(A) ......
KWA uncertainty 3 dB .............................................
LWA
sound power level guaranteed 102 dB(A) .......
Wear ear-mus.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with ISO 22867.
Handle under load
Vibration emission value ah ≤ 2.5 m/s2
The specied vibration value was established in
accordance with a standardized testing method.
It may change according to how the electric
equipment is used and may exceed the specied
value in exceptional circumstances.
The specied vibration value can be used to
compare the equipment with other electric power
tools.
The specied vibration value can be used for initi-
al assessment of a harmful eect.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect wor-
king order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
This consignment contains lithium-ion batteries.
In accordance with special provision 188 this
consignment is not subject to the ADR regula-
tions. Handle with care. Danger of ignition in case
of damage to the consignment package. If the
consignment package is damaged: Check and
if necessary repackage. For further information
contact: 0049 1807 10 20 20 66 (xed network
14 ct/min, mobile phone max. 42 ct/min) Outside
Germany charges will apply instead for a regular
call to a landline number in Germany.
Beiblatt_PXCPHTS_018U.indd 2 29.08.2016 16:47:04

Product specificaties

Merk: Ozito
Categorie: Heggenschaar
Model: PXCPHTS-018U

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXCPHTS-018U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Heggenschaar Ozito

Ozito

Ozito PXPHTS-1845 Handleiding

8 April 2024
Ozito

Ozito PXPPK-2520 Handleiding

27 Augustus 2023
Ozito

Ozito PXPHTK-2545 Handleiding

27 Augustus 2023
Ozito

Ozito HTER-600U Handleiding

18 Juni 2023
Ozito

Ozito PXCHTS-018U Handleiding

13 Juni 2023
Ozito

Ozito PXCPHTS-018U Handleiding

7 Juni 2023
Ozito

Ozito PXCHTK-218U Handleiding

6 Juni 2023
Ozito

Ozito OHT-018 Handleiding

30 Mei 2023
Ozito

Ozito PXCHT-6502U Handleiding

19 Mei 2023
Ozito

Ozito EPHT-501 Handleiding

13 Mei 2023

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar

Cramer

Cramer 82HD75 Handleiding

8 April 2024
Sterwins

Sterwins EHT2-50.3 Handleiding

16 Maart 2024
Einhell

Einhell AHS 24 Handleiding

16 Maart 2024
Mr Gardener

Mr Gardener AH 1846-2 Li PXC Handleiding

12 Maart 2024
Honda

Honda HHH25S Handleiding

9 Maart 2024
Ryobi

Ryobi R18PHT120 Handleiding

27 Februari 2024
Shindaiwa

Shindaiwa DH232 Handleiding

7 Februari 2024
G-Technology

G-Technology HT50 Handleiding

24 Januari 2024
Ergotools Pattfield

Ergotools Pattfield E-HS 660 Handleiding

12 Januari 2024
Ferrex

Ferrex F-EHS 694-1 Handleiding

12 Januari 2024