Overtone Labs Tune-Bot Studio Handleiding
Overtone Labs
Muziekinstrument
Tune-Bot Studio
Bekijk gratis de handleiding van Overtone Labs Tune-Bot Studio (1 pagina’s), behorend tot de categorie Muziekinstrument. Deze gids werd als nuttig beoordeeld door 5 mensen en kreeg gemiddeld 5.0 sterren uit 3 reviews. Heb je een vraag over Overtone Labs Tune-Bot Studio of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
GLOSSARY
Lug pitch: The pitch obtained by striking the drum
head near one of the lugs. Lug pitch diers from lug to
lug. Also, lug pitches of baer lugs are unrelated to lug
pitches of resonant lugs.
Fundamental pitch: The overall pitch of the drum. The
dominant and lowest pitch when you hit the center of
the drum head. The fundamental pitch is the same for
both the baer and resonant head.
Matching lugs: Trying to get the same or similar lug
pitch at each lug.
MODES
Absolute Mode: Shows the pitch in Hz (8) as well as
the nearest note and octave (10). The dial shows the
pitch error (9) from the nearest note.
Dierence mode: Useful for matching lugs, it lets you
choose one lug pitch as a reference and compares
other readings to that lug pitch. The dierence
between the new reading and the reference is
displayed as +/- Hz, it also displays the reference pitch
at the boom of the display (14) and the frequency
error on the dial (13,16). Note: Dierence mode also
lters around the reference pitch and rejects sounds
more than 20% higher or lower in pitch.
Filter Mode: Lets you save the latest frequency
measurement as a reference rejects sounds more and
than 20% higher or lower than that reference The .
Fil Reference Value is display the boom of the ter ed in
display (14) Filter mode helps to avoid picking . up
uctuang high or low readings.
HOW TO USE
Open the baery cover by pushing down and sliding
out Pull o the paper tab from the baeries and make .
sure to match the posive and negative ends of the
baeries to the correct contacts. Replace the cover.
Place your drum on a stool or carpet to mute the
opposite head. Then, clip the tune-bot studio to the
drum hoop between any two lugs. Push the red Power
buon (5) to turn the unit on.
Strike the head of your drum lightly about 1” inward of
any lug and wait for a reading on the display (8), this
reading is your lug pitch. Tightening a lug will raise the
pitch while loosening the lug will lower the pitch. Try
to get nearly the same pitch at each lug. Measure each
of the lugs and make adjustments unl all lugs are
within 2Hz of each other. We have lug pitch
suggesons, including Artist tunings, listed on our
website, www.tu -bot.com, and on our free tuning ne
calculator app which you can download at the Apple
app store or Google Play store.
You can also tune your drums using the dierence
mode. First, get a lug pitch reading as described earlier.
Next, press the triangle buon (7). Now strike 1”
inward of the remaining lugs. You are aiming for a
reading (12) close to 0. If your reading is posive,
loosen the lug, if it is negave, ghten the lug. Repeat
for all lugs unl all readings are within +/- 2 Hz. Note
that if TOP, BOT or FUND is displayed under HEAD (18)
then a saved frequency will be used instead of the
latest measurement.
In order to read the fundamental pitch of the drum,
you must allow both heads to resonate. With both
heads unmuted (on a stand), strike the center of the
drum head, the fundamental pitch in Hz and nearest
note will be displayed. Make sure not to use
dierence mode when reading the fundamental pitch.
SAVING AND RECALLING
You can save your tunings so that you can easily -re
tune to the same sound. The tuner has save slots for 5
dierent drum kits with up to 10 drums in each kit.
Addionally, there are separate slots for top head,
boom head, or fundamental pitch for each drum. To
save a pitch, rst you will need to choose a save slot.
Pressing the KIT buon (2) will c through kit ycle
numbers 1-5 (20, 22), pressing DRUM (3) will cycle
through drum numbers 1-10 (0 represenng 10) (19,
23), and pressing HEAD (4) will cycle through TOP, BOT,
and FUND (18, 24). Note that you must choose a head
in order to save. Once you have a pitch reading and
are in the save slot you want, hold the DRUM buon
for a few seconds unl the LED ashes (1), now the
pitch is saved and displayed in the boom le corner
of the display (25) To recall saved tuning, select the . a
corresponding save slot.
You can also use saved tunings in conjunction with
dierence mode. If you recall a saved pitch and then
press the triangle buon, all readings will show how
many - Hz you are from the saved pitch (15) +/ .
ADVANCED FEATURES
If you are having issues with variable readings, try
using the Filter mode. The Filter mode will limit the
range of your readings, keeping you from geng
inconsistent numbers. To use Filter, you must first get
a correct lug pitch reading. Next, press the FILT buon
(6), noce that the lter reference pitch is displayed in
the bottom right corner of the display (14). Now, all
readings will be in a close range to the reference pitch.
Note you must re-set the lter when you switch drums
or heads or if you are making large tuning changes to
the drum (more than - 20% in Hz) +/ .
To tune a drum above 400Hz (most likely a snare
resonant head), you will need to use the -range hi
mode. This mode exten the tuner to 450 Hz. ds ’s range
To enter -range mode, hold FILT for a few seconds hi
unl HI-RANGE is displayed in boom center of the
display. It is best not to use -range mode for typical hi
tuning (below 400 Hz) .
SPECIFICATIONS
Tuning Range: - 400 Hz, 1C - 4G# 30
Hi-Range - 450 Hz, 1C 30 –4A
Sine-Wave Resoluon: - 0.5 Hz. +/
Response Time: 750 mSec.
Power: 2 AAA Baeries
Weight: 72 g. (without baeries)
PRECAUTIONS
1. Avoid the following situaons to prevent a potenal
malfuncon of the tuner: Exposure to liquids, Direct
sunlight, Extreme temperature or humidity, Excessive
dust or dirt.
2. Remove the baeries to prevent leakage when the
unit is not in use for long periods.
3. To avoid breakage, do not apply excessive force to
the push-buons, baery cover, clamp or display. Do
not take apart the tuner, it is not user serviceable.
Dismantling the tuner voids the manufacturer's
warranty.
4. Do not use liquid cleaners on the product.
REGULATIONS: FCC (USA)
This Class B digital device has been tested and found to
comply with Part 15 of the FCC Rules. These FCC limits
provide reasonable protecon against radiated
interference in a residenal installaon.
REGULATIONS: CE Mark (European Harmonized
Standards)
This baery operated apparatus has been tested and
found to comply with EMC Direcve (89/336/EEC) and
CE mark Direcve (93/68/EEC ).
Product specificaties
| Merk: | Overtone Labs |
| Categorie: | Muziekinstrument |
| Model: | Tune-Bot Studio |
Heb je hulp nodig?
Als je hulp nodig hebt met Overtone Labs Tune-Bot Studio stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Muziekinstrument Overtone Labs
23 Maart 2025
Handleiding Muziekinstrument
- Aguilar
- Gravity
- Yamaha
- Artesia
- Palmer
- Gretsch Guitars
- Mooer
- Elektron
- Boss
- Casio
- Chord
- La Crosse Technology
- Eurolite
- Jupiter
- Max
Nieuwste handleidingen voor Muziekinstrument
6 Juni 2025
6 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
25 Mei 2025
25 Mei 2025
25 Mei 2025