Oregon Scientific RRM112A Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Oregon Scientific RRM112A (9 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
1
GB
DIGITAL RF CLOCK RADIO
MODEL NO.: RRM-112A
USER’S MANUAL
SECTION 1 INTRODUCTION
Congratulations on purchasing the RRM-112A Digital RF Clock
Radio, the RRM-112A is a product with multiple features and
functions including an ExactSet TM clock that automatically sets
the time and date from signals broadcast by the US Atomic Clock,
one of the world's most accurate timekeepers.
The RRM-112A also comes with a built-in radio with digital
PLL(Phase Lock Loop) tuning, 4 U.S. zone-times selection, daily
alarm with snooze function and backlight.
CONTROL BUTTONS AND CONNECTORS
I
J
L
N
F
G
H
A
B
C
D
E
K
2
GB
A RADIO BUTTON
Press to turn radio on and/or off.
B AM / FM BUTTON
Press to switch between AM and FM radio frequencies.
C STATION BUTTON
Press to switch among user programmed selected radio stations.
D TUNING [ ] / [ ] BUTTONS
Press [ ] ] or [ to scroll through radio station choices.
E VOLUME [ + ] / [
-
] BUTTONS
Adjusts the volume of the radio or change the value of a setting.
F ZONE BUTTON
Press to sequence through the 4 US time zones: Pacific,
Mountain, Central and Eastern.
G ON / OFF BUTTON
Press to select Beep Alarm-On, Radio Alarm-On and Alarm-Off
modes.
H CLOCK BUTTON
Press to switch between Clock with Seconds and Clock with
Day of the Week display modes.
I SLEEP BUTTON
Press to select the radio auto-off feature for 15, 30, 46, 60, 90 or
120 minutes.Activates the sleep function of the radio.
J SNOOZE / LIGHT BUTTON
Activates the snooze function or turns on the backlight.
K PRESS BUTTON
Clears all user selected settings and returns to factory set defaults.
L POWER ADAPTER CONNECTOR
Connection jack for optional AC Power Adapter. AC Power
Adapter is included.
M HEADSET CONNECTOR
Connection jack for optional headset. Headset not included.
N ANTENNA
External antenna for radio.
POWER REQUIREMENTS
The RRM-112A operates on four AA-sized (UM3) batteries—two
for clock operation and two for radio. To insert the batteries, follow
the polarities shown inside the battery compartment and press
[RESET].
3
GB
The clock and radio have separate low-battery indicators. Change
the batteries accordingly when the respective indicator lights up.
An AC Power Adapter is included. To connect it, plug it into the
power adapter connector and a wall socket.
BEFORE YOU BEGIN
The RRM-112A is designed for table stand or wall mount.
Table Stand
Place the RRM-112A on a flat, sturdy surface. You can adjust the
display angle of the LCD by lifting up the LCD panel.
Note: Unlock the latch on the back of the unit before lifting up
the LCD panel.
Wall Mount
A wall mounting guide is included. Place the mounting guide on the
wall where the RRM-112A is to be hanged. After making appropriate
markings install two mounting screws onto the wall. Hang the
RRM-112A on the mounting screws.
Note: For wall mounting the unit should be kept flat by locking the
latch on the back of the unit.
Note: The power adaptor supplies
power only to the radio. The clock
operates on batteries.


Product specificaties

Merk: Oregon Scientific
Categorie: Wekkerradio
Model: RRM112A

Heb je hulp nodig?

Als je hulp nodig hebt met Oregon Scientific RRM112A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio Oregon Scientific

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio