NUVO Wright 60/4709 Handleiding

Bekijk gratis de handleiding van NUVO Wright 60/4709 (2 pagina’s), behorend tot de categorie Lamp. Deze gids werd als nuttig beoordeeld door 38 mensen en kreeg gemiddeld 4.4 sterren uit 7 reviews. Heb je een vraag over NUVO Wright 60/4709 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

ASSEMBLY INSTRUCTION

SKU#60/4609, 60/4709

NOTE:Please consult a qualied electrician if you are not certain of the installation or service.

CAUTION:Before starting the installation or service, disconnect the power by turning o the circuit breaker

or by removing the fuse at the fuse box.

1.Carefully unpack the xture, lay out all parts on a clean surface.

2.Fasten the mounting strap onto the outlet box by using provided 2 outlet box screws.

3.Screw the nipple A into the bushing A. Place the tube and bushing over the nipple A. Then place the xture bracket over

the tube, and place the sleeve A and decorative cover and sleeve over the nipple A, fasten the loop to the nipple A.

4.Using two pliers, twist open links at two ends of the chain as show. Hook one link to the loop and the other link to the

screw collar loop. Close the links. Place a piece of cloth between the pliers jaws and the chain link to prevent scratching

the link nish.

5.Weave xture wires up through the nipple A, through the tube, through the bushing, through the xture bracket, through

the sleeve A, through the decorative cover , through the sleeve, through the loop, through the chain, through the ring,

through the screw collar loop and through the canopy and through the nipple on the mounting strap.

6.Tie the ground wires from xture and from outlet box to the ground screw on the mounting strap. Connect the wire

without writing on it (with raised ribs) from the xture to the white wire (neutral wire) from the supply circuit. Connect

the wire with writing on it from the xture to the black wire (live wire) from the supply circuit. Cover the connections

using provided wire connectors. Position wires back inside outlet box.

7.Place the canopy over the nipple all the way to the ceiling and tighten e ring onto the screw collar loop until the th

canopy is held firmly against the ceiling.

8.Unscrew the socket rings from the sockets. Place the shades over the sockets, refasten the socket rings to secure shades.

9.Install the bulbs (Not included). Turn on the power.

A Satco Product

Product specificaties