Noctua NF-A6x15 FLX Handleiding
Noctua
Hardwarekoeling
NF-A6x15 FLX
Bekijk gratis de handleiding van Noctua NF-A6x15 FLX (1 pagina’s), behorend tot de categorie Hardwarekoeling. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Noctua NF-A6x15 FLX of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
NOCTUA NF-A6x15 FLX
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
The NF-A6x15 FLX features a short 20cm primary cable
in order to help you minimise cable clutter in typical
applications. If you need a longer cable, please add the
supplied 30cm extension (NA-EC2).
The NF-A6x15 FLX comes with Low-Noise (NA-RC15) and
Ultra-Low-Noise Adaptors (NA-RC13) that allow you to
reduce the fan speed from 3500 to 3050rpm (NA-RC15)
and 2250rpm (NA-RC13) in order to achieve even quieter
operation.
Cleaning and maintenance
3
In order to maintain maximum performance, please clean
your fans regularly using a duster, slightly moist tissue or
canned air. Please be careful not to use too much force
in order to prevent any damage to the fan. Please don’t
use a vacuum cleaner as this may apply excessive force
to the fan.
In order to ensure flawless operation over many years of
usage, the NF-A6x15 FLX’s premium grade SSO2 bearing
is fully sealed to prevent the entering of fine dust particles.
Please note that the fan is not designed to be taken apart
by the user. Removing the impeller from the frame will
break the sealing of the bearing and results in a loss of
warranty.
Warranty, support and FAQs
!
Even with high-grade products and strict quality control,
the possibility of defects cannot be eliminated entirely.
Therefore, we aim at providing the highest possible level of
reliability and convenience by offering a warranty period of
6 years and direct, fast and straightforward RMA service.
Should you encounter any problems with your
NF-A6x15 FLX, please don’t hesitate to contact our support
team (support@noctua.at).
Please also consult the FAQ section on our website:
faqs.noctua.at
This document includes some instructions for installing,
running and cleaning your NF-A6x15 FLX.
Should you encounter any difficulties, please
check the FAQs on our website (faqs.noctua.at)
and don’t hesitate to contact our support team at
support@noctua.at.
Multilingual versions of this manual are available on our
website: www.noctua.at/manuals
Dear customer,
Congratulations on choosing the Noctua NF-A6x15 FLX.
We at Noctua always strive to achieve superior quiet cooling
performance regardless of whether it’s a big 200mm fan
or a small 40mm one. That’s why the NF-A6x15 FLX sports
many of the features and advanced aerodynamic design
measures of our award-winning larger models, making it
perhaps the most thoroughly optimised 60mm fan on the
market.
Each Noctua fan is double-checked for flawless operation
by our quality control team before it leaves the factory and
I’m confident that you will be able to sense some of the
research, attention and care we’ve put into making this
product.
Enjoy your NF-A6x15 FLX!
Yours sincerely,
Roland Mossig, Noctua CEO
Included mounting parts:
NA-EC2
30cm extension cable
NA-RC15
Low-Noise Adaptor (L.N.A.)
NA-RC13
Ultra-Low-Noise Adaptor
(U.L.N.A.)
NA-AC1
3:4-pin adaptor cable
4x NA-AV2
anti-vibration mounts
4x fan screws
Installation
1
If you replace an existing 60mm fan with the NF-A6x15
FLX in devices such as storage or network solutions,
it is usually best to use the screws (or other mounting
mechanism) used for the original fan.
Depending on the application, it may also be possible to
use the supplied mounting screws or silicone anti-vibration
mounts.
For installing the fan using the NA-AV2 mounts, please
first pull the F side through the fan’s mounting holes and
then pull the C side through the mounting holes of the case:
If the long ends of the mounts are in the way, you can use
scissors to cut them after installation. Note that this will
then make them difficult to reinstall in the future.
F = fan side C = case side
Connection
2
The NF-A6x15 FLX features a standard 3-pin fan connector.
Please note that the fan can also be connected to 4-pin
motherboard fan headers though. If you would like to
connect the fan directly to your power supply, please use
the supplied 3:4-pin adaptor (NA-AC1).
Product specificaties
| Merk: | Noctua |
| Categorie: | Hardwarekoeling |
| Model: | NF-A6x15 FLX |
Heb je hulp nodig?
Als je hulp nodig hebt met Noctua NF-A6x15 FLX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hardwarekoeling Noctua
14 April 2025
14 April 2025
14 April 2025
14 April 2025
9 April 2025
20 November 2024
22 Oktober 2024
22 Oktober 2024
25 September 2024
25 September 2024
Handleiding Hardwarekoeling
- CoolerMaster
- Arctic Cooling
- ALSEYE
- Bitspower
- Sharkoon
- Daikin
- Antec
- Alphacool
- DeepCool
- Xigmatek
- Alpenföhn
- FSP
- Middle Atlantic Products
- Corsair
- Jonsbo
Nieuwste handleidingen voor Hardwarekoeling
15 Juni 2025
9 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
