Noctua NF-A6x15 5V Handleiding
Noctua
Hardwarekoeling
NF-A6x15 5V
Bekijk gratis de handleiding van Noctua NF-A6x15 5V (2 pagina’s), behorend tot de categorie Hardwarekoeling. Deze gids werd als nuttig beoordeeld door 4 mensen en kreeg gemiddeld 4.9 sterren uit 2.5 reviews. Heb je een vraag over Noctua NF-A6x15 5V of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
NOCTUA NF-A6x15 5V
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
Installation
This document includes some instructions for installing,
running and cleaning your NF-A6x15 5V.
Should you encounter any difficulties, please
check the FAQs on our website (faqs.noctua.at)
and don’t hesitate to contact our support team at
support@noctua.at.
Multilingual versions of this manual are available on our
website: www.noctua.at/manuals
1
Dear customer,
Congratulations on choosing the Noctua NF-A6x15 5V.
We at Noctua always strive to achieve superior quiet cooling
performance regardless of whether it’s a big 200mm fan
or a small 40mm one. That’s why the NF-A6x15 5V sports
many of the features and advanced aerodynamic design
measures of our award-winning larger models, making it
perhaps the most thoroughly optimised 60mm fan on the
market.
Each Noctua fan is double-checked for flawless operation
by our quality control team before it leaves the factory and
I’m confident that you will be able to sense some of the
research, attention and care we’ve put into making this
product.
Enjoy your NF-A6x15 5V!
Yours sincerely,
Roland Mossig, Noctua CEO
Included mounting parts:
If you replace an existing 60mm fan with the NF-A6x15 5V
in devices such as storage or network solutions, it is usually
best to use the screws (or other mounting mechanism)
used for the original fan.
Depending on the application, it may also be possible to
use the supplied mounting screws or silicone anti-vibration
mounts.
Caution: Being a 5V fan, the NF-A6x15 5V can not be run
at 12V and will be damaged when used with typical 12V
power sources such as PC motherboard fan headers.
For installing the fan using the NA-AV2 mounts, please
first pull the F side through the fan’s mounting holes and
then pull the C side through the mounting holes of the
case:
Using the OmniJoin
TM
adaptor set
3
The supplied OmniJoin™ adaptor set allows you to easily
connect the NF-A6x15 5V to proprietary fan headers if you
want to replace a 60mm fan in devices such as network or
storage solutions.
Please first identify the individual leads of the OmniJoin™
adaptor and the original fan. The OmniJoin™ adaptor uses
black for ground (GND) and red for +5V.
The black lead of the adaptor has to be matched with
the original GND lead and the red adaptor cable with the
original +5V lead. Many fan cables use the same colours
as the OmniJoin™ adaptor, but please note that there is
no guarantee for this, so make sure to correctly identify the
GND and +5V leads of the original fan. Please refer to the
manual that came with the device or contact the device
manufacturer if in doubt.
If the long ends of the mounts are in the way, you can use
scissors to cut them after installation. Note that this will
then make them difficult to reinstall in the future.
NA-EC2
30cm extension cable
4x NA-AV2
anti-vibration mounts
NA-AC7
USB power adaptor cable
OmniJoin™ adaptor set
4x fan screws
After you’ve identified the individual leads, please proceed
with the following steps to install the OmniJoin
TM
adaptor:
Make sure to correctly
identify the GND and
+5V leads of the
original fan!
Cable connectors
GND
+5V
OmniJoin
TM
adaptor
Connector of the original fan
Connection
2
The NF-A6x15 5V features a standard 3-pin fan connector.
However, please note that the fan can also be connected to
standard 4-pin fan headers.
If you would like to run the fan on USB power sources
such as devices with USB host ports, power banks or USB
power supplies, please use the included NA-AC7 USB
power adaptor cable. Please note that the NA-AC7 must be
used exclusively with the NF-A6x15 5V fan because using
it with other fans bears the risk of damaging sensitive USB
host devices.
If you would like to connect the fan to other fan headers,
please use the supplied OmniJoin™ adaptor set as
described below.
The fan features a short 20cm primary cable in order to
help you minimise cable clutter in typical applications. If
you need a longer cable, please add the supplied 30cm
extension (NA-EC2).
F = fan side C = case side
NOCTUA NF-A6x15 5V
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
Cleaning and maintenance
4
In order to maintain maximum performance, please clean
your fans regularly using a duster, slightly moist tissue or
canned air. Please be careful not to use too much force
in order to prevent any damage to the fan. Please don’t
use a vacuum cleaner as this may apply excessive force
to the fan.
In order to ensure flawless operation over many years of
usage, the NF-A6x15 5V’s premium grade SSO2 bearing
is fully sealed to prevent the entering of fine dust particles.
Please note that the fan is not designed to be taken apart
by the user. Removing the impeller from the frame will
break the sealing of the bearing and results in a loss of
warranty.
Step 1
Cut off the connector of the fan that was originally used in
the device. Make sure not to cut the cable directly at the
connector, there should be least 2-3cm of cable left:
2-3cm minimum!
Step 2
Then take one of the supplied cable connectors and insert
the GND lead of the original cable and the black lead of
the OmniJoin
TM
adaptor into the two holes of the cable
connector. Make sure that both leads are fully inserted and
pushed all the way back.
Step 3
Then use flat nose pliers to push down the yellow button
of the cable connector. Make sure that the button is not
jammed and pushed all the way down. If the button
is jammed, push it down from both sides of the cable
connector using the flat nose pliers.
Repeat Step 2 and 3 for the +5V lead.
Warranty, support and FAQs
!
Even with high-grade products and strict quality control,
the possibility of defects cannot be eliminated entirely.
Therefore, we aim at providing the highest possible level of
reliability and convenience by offering a warranty period of
6 years and direct, fast and straightforward RMA service.
Should you encounter any problems with your
NF-A6x15 5V, please don’t hesitate to contact our support
team (support@noctua.at).
Please also consult the FAQ section on our website:
faqs.noctua.at
After you’ve fixed the original fan’s cable to the OmniJoin™
adaptor using the cable connectors, simply connect the
NF-A6x15 5V to the adaptor in order to use it in your
device.
Product specificaties
| Merk: | Noctua |
| Categorie: | Hardwarekoeling |
| Model: | NF-A6x15 5V |
Heb je hulp nodig?
Als je hulp nodig hebt met Noctua NF-A6x15 5V stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Hardwarekoeling Noctua
14 April 2025
14 April 2025
14 April 2025
14 April 2025
9 April 2025
20 November 2024
22 Oktober 2024
22 Oktober 2024
25 September 2024
25 September 2024
Handleiding Hardwarekoeling
- PCCOOLER
- AC Infinity
- Emerson
- Tristar
- Gelid
- Akasa
- Mars Gaming
- Be Quiet!
- EK Water Blocks
- Bitspower
- Phanteks
- NZXT
- Chieftec
- Daikin
- Gigabyte
Nieuwste handleidingen voor Hardwarekoeling
15 Juni 2025
9 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
20 Mei 2025
20 Mei 2025
20 Mei 2025
