Nitecore NU30 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Nitecore NU30 (1 pagina's) in de categorie Zaklamp. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
NU30
®
The All-Round Flashlight Expert
User Manual
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address: Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
20161205
Please find us on facebook:
Nitecore Flashlight
Thanks for purchasing NITECORE!
3,700cd (Peak Beam Intensity)
121m (Beam Distance)
IP67
(Rated)
1.5m
(Impact Resistant)
TURBO HIGH MID ULTRALOW Auxiliary LEDs(W) RED
22h12h13h*1 15 25 15h min h min 330h
LUMENS
400
LUMENS
180
LUMENS
36
LUMEN
1
LUMENS
35
LUMENS
19
Features
·Multi-purposes lightweight headlamp
·White and red dual outputs
·A CREE XP-G2 S3 primary white LED capable of outputting 400 lumens
·Incorporated Precision Digital Optics technology
·Two auxiliary LEDs with high colour rendering capability: CRI ≥90 provides output at 35
lumens
·Red light illumination
·Built-in 1800mAh Li-ion battery
·USB rechargeable with onboard charging circuit
·Dual switches design offers easy one-handed operation
·Built-in power indicator (Patent No. ZL201220057767.4)
·4 brightness levels and 2 special modes available
·Flood beam profile with 60° adjustable angle
·Made from durable PC materials
·Compact and lightweight
·Impact resistant to 1.5 metre
Dimensions
Size: 2.48” ×1.71” ×1.24”(with bracket)
Weight: 2.99oz(84.8g, with battery)
Accessories
USB cord
Output & Runtime
NOTICE: Stated data has been measured in accordance with the international flashlight
testing standards ANSI/NEMA FL1 using an integrated and fully charged 3.7V 1800mAh
rechargeable Li-ion battery under laboratory conditions. End-user results may vary due to
individual usage habits and environmental conditions.
*Runtime for turbo mode is calculated based on theoretical arithmetic.
Operating Instructions
Dual Switches
The power switch controls the white light, and the R switch controls the red light.
White Light Illumination
With the light turned off, press the power switch to turn the white light on.
1. Within 3 second intervals, pressing the power switch repeatedly to cycle through
Low-Mid-High-Standby.
2. Pressing the power switch when no action is taken after 3 second will turn the light off.
Access to Turbo
With the light turned on, hold down the power switch for 1 second to enter turbo mode
(400 lumens)
Note: The NU30’s turbo output diminishes after 30 second to prevent overheating.
White Auxiliary LEDs
With the light turned off, hold down the power switch for 1 second to activate the 2
onboard white auxiliary LEDs for flood illumination. Pressing the power switch again to
turn the white auxiliary LEDs off.
Red Auxiliary LEDs
With the light turned off, press the R switch to turn the red auxiliary LEDs on. Press the R
switch repeatedly within 3 seconds interval to cycle through Red illumination-Flashing red
illumination-Standby. Pressing the R switch when no action is taken after 3 second will
turn the red auxiliary LEDs off.
Special Modes (SOS/Location Beacon)
With the light turned off, hold down the power switch for 3 seconds to enter SOS; press
the power switch again within 3 seconds and switch to beacon mode. To exit special
mode, press the power switch when the NU30 is in beacon mode, alternatively, press the
power switch when no action is taken after 3 second.
Lockout/Unlock
With the light turned off, hold down both the power switch and the R switch
simultaneously until the built-in red indicator blink once to enter lockout mode. All LEDs
will be rendered inoperative in lockout mode. To unlock, hold down both switches until the
red indicator blinks once again.
Power Tips
With the light turned off, hold down the R switch for 1 second to activate the built in red
power indicator. The indicator will blink to give an approximation for remaining battery
level: 3 blinks represent battery level above 50%, 2 blinks represent battery level below
50%, 1 blink represents battery level below 10%.
Note: Recharge the product when output appears to be dim or unresponsive.
Recharge
This product comes with USB recharge capability. Raise the micro USB port cover to
expose the charging port, connect the port to a power supply with a USB cord to initiate
the charging process. Fully chargings the product takes approximately 3.5 hours.
Warranty Details
All NITECORE products are warranted for quality. Any defective /malfunctioning
NITECORE product can be repaired free of charge for a period of 12 months from the
date of purchase. Beyond 12 months, a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts. The
warranty is nullified in either or both of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized
parties.
2. The product(s) is/are damaged through improper use.
For the latest information on NITECORE® products and services, please contact a local
NITECORE® distributor or send an email to service@nitecore.com.
※All images, text and statements specified herein this user manual are for reference
purpose only. Should any discrepancy occurs between this manual and information
specified on www.nitecore.com, information on our official website shall prevail. Sysmax
Industry Co., Ltd. reserves the rights to interpret and amend the content of this document
at any time without prior notice.
Charging tips:
When the product is connected to a power supply,the
built-in red power indicator will be lit to indicate
charging in progress, and will turn green when
charging completes.


Product specificaties

Merk: Nitecore
Categorie: Zaklamp
Model: NU30

Heb je hulp nodig?

Als je hulp nodig hebt met Nitecore NU30 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Zaklamp Nitecore

Handleiding Zaklamp

Nieuwste handleidingen voor Zaklamp