Navilock NL-604P Handleiding

Navilock GPS apparaat NL-604P

Lees hieronder de 📖 handleiding in het Nederlandse voor Navilock NL-604P (10 pagina's) in de categorie GPS apparaat. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10

NL-604P

operation manual (61842)

1. Introduction

The NL-604P is a serial GPS receiver with an internal antenna and a ublox6 GPS & GALILEO

SuperSense® GPS/Galileo chip set. The serial port enables the connection with a notebook,

UMPC, tablet PC or car PC. Thanks to its universal MD6 connector, it can be used on almost all

devices by means of an adapter cable. Adapter cables are available optionally.

1.1. Contents*

1x Navilock NL-604P

1x set mounting material

(washer, circlip, nut)

1x 8cm CD ROM including operation manual

* Before using the device, please make sure that all the parts are included in the package. If any

parts are missing or damaged, please contact your dealer immediately.

Important health and safety information

When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always

follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual

and on the product. In order to avoid injuries, electrocution, fire and damages to the product, observe the following precautions:

ELECTRIC SECURITY

This product is designed for operation with power supply via the USB port. Any other operation mode can be dangerous and may

void the warranty claims for this product. This unit contains an internal back-up battery.

NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN

ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS

INCLUDED WITH THE PRODUCT.

PRECAUTIONS REGARDING DIRECT SUNLIGHT

Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, the battery or the rechargeable

battery for an extended period in a vehicle or plate, where the temperature can increase to over 60°C (140°F), for example on the

dashboard of a car, the window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV light.

Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable battery may overheat.

Damages requiring repairs

Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable battery and contact an

authorized repair man or your dealer.

• Liquid or an object has entered the product.

• The product has fallen down or was damaged.

• There are visible signs of overheating.

• When operated normally, the product does not function flawlessly.

Avoid using the unit directly after strong temperature changes.

If the unit is exposed to strong temperature and humidity fluctuations, condensation can form in the unit. In order to avoid

damages to the unit, please wait until the condensation has dried off before using the unit.

NOTE: If you bring the unit from a cold to a warm environment, or vice versa, first let it get

accustomed to the new temperature before turning it on.

2. Installation

The NL-604P is designed for mounting on a trunk lid, car roof or on a boat. For this purpose, you

must choose a mounting location, where the material is hard enough to absorb the pressure

applied to the receiver, without denting in. Otherwise the rubber gasket on the mounting surface

would not seal completely any more, and water might penetrate. The mounting examples shown

for various situations provide maximum reception, since it is not hindered by the vehicle (e.g. by

a window pane).

Do not carry out the mounting yourself, but rather let it be done by a specialist shop. If you carry

out the mounting yourself, you may void the warranty. Please ask your dealer to what extent the

personal mounting might influence the warranty and if it is necessary to have this work done by a

specialist in order to keep the warranty.

Navilock is not responsible for wrong mounting, because we recommend that this should be done

by a specialist. This is the reason we don’t offer any mounting instructions here. An experienced

car repair shop has the expertise necessary to carry out the mounting.

3. Starting operation, e.g. with an USB adapter cable (article number 61264)

3.1. Plug the USB cable into a free USB port on your notebook etc., and connect it with the

NL-604P. The NL-604P will be recognized by your Windows operating system, which will

attempt to install a driver. Abort this process, and start the driver installation of the USB cable

from the CD-ROM, or download the driver from the Navilock website. Follow the installation

instructions. After the installation is completed, re-start your computer. Then the GPS COM

port will be available in the Device Manager under Connections. Set this port in your

navigation or route planner software. Do not use another program which accesses this port at

the same time.

Product specificaties

Merk:	Navilock
Categorie:	GPS apparaat
Model:	NL-604P
Kleur van het product:	Zwart
Gewicht:	- g
Breedte:	62 mm
Diepte:	62 mm
Hoogte:	21 mm
Frequentie:	1575.42 MHz
Gevoeligheid:	-162 dBmW
Aantal kanalen:	- kanalen
Antenne:	Intern
Chipset:	u-blox 6
Bedrijfstemperatuur (T-T):	-20 - 60 °C
GPS-nauwkeurigheid - plaats:	2.5 m
Update rate:	5 Hz
Navigatie protocollen:	GGA, GSA, GSV, NMEA 0183, RMC, VTG
Navigation signals supported:	L1