Navilock NL-603P Handleiding

Navilock GPS apparaat NL-603P

Lees hieronder de 📖 handleiding in het Nederlandse voor Navilock NL-603P (13 pagina's) in de categorie GPS apparaat. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13

NL-6 03P

Operation manual (61841)

1. Introduction

The GPS Receiver based on u-blox 6 SuperSence® chipset has a built-in antenna for high

sensitivity. Besides GPS, this u-blox 6 chipset enables you in future to receive also Galileo, the

european navigationsystem.

The MD6 universal connector enables the connection of optional USB or serial connecting

cables. You can use this GPS Receiver with a Car PC or a Notebook and a suitable routing

software for navigation.

1.1. Contents*

1x Navilock NL- P 603

1x Operation manual on CD ROM

* Before using the device, please make sure that all the parts are included in the package. If any

parts are missing or damaged, please contact your dealer immediately.

Important health and safety information

When using this product, take the following precautions in order to avoid possible damages and legal consequences. Always

follow all safety and operation manuals exactly and keep them for future reference. Observe all warnings in the operation manual

and on the product. In order to avoid injuries, electrocution, re and damages to the product, observe the following precautions:

ELECTRIC SECURITY

This product is designed for operation with power supply via the USB port. Any other operation mode can be dangerous and may

void the warranty claims for this product. This unit contains an internal back-up battery.

NOTE: RECYCLE OR DISPOSE OF USED BATTERIES OR RECHARGEABLE BATTERIES IN

ACCORDANCE WITH ALL APPLICABLE REGULATIONS AND THE INSTRUCTIONS

INCLUDED WITH THE PRODUCT.

PRECAUTIONS REGARDING DIRECT SUNLIGHT

Make sure the unit is not exposed to very high humidity and temperatures. Never leave the unit, the battery or the rechargeable

battery for an extended period in a vehicle or plate, where the temperature can increase to over 60°C (140°F), for example on the

dashboard of a car, the window sill or behind a pane of glass, which is directly exposed to the sun or very strong UV light.

Otherwise the unit or the vehicle may be damaged, and the battery or the rechargeable battery may overheat.

Damages requiring repairs

Disconnect the unit from the AC supply in the following cases; also disconnect the rechargeable battery and contact an

authorized repair man or your dealer . if

• Liquid or an object has entered the product.

• The product has fallen down or was damaged.

• There are visible signs of overheating.

• When operated normally, the product does not function flawlessly.

Avoid using the unit directly after strong temperature changes.

If the unit is exposed to strong temperature and humidity uctuations, condensation can form in the unit. In order to avoid

damages to the unit, please wait until the condensation has dried o before using the unit.

NOTE: If you bring the unit from a cold to a warm environment, or vice versa, rst let it get

accustomed to the new temperature before turning it on.

2. Starting operation, e.g. with an USB adapter cable (article number 61264)

2.1. Plug the USB cable in a free USB port on your notebook etc., and connect it with the NL-

603P. The NL-603P will be recognized by your Windows operating system, which will attempt

to install a driver. Abort this process, and start “ublox5_install.exe” from the CD-ROM, or

download the driver from the Navilock website. Follow the installation instructions. After the

installation is complete, re-start your computer. Then the GPS COM port will be available in

the Device Manager under Connections. Set this port in your navigation or route planner

software. Do not use another progra that accesses this port at the same time.m

3. LED indicator

Flashes, with Satx

Lights, without Satx

3. Application environment

The NL-603P can be used as a serial GPS receiver under Windows 2000/XP/Vista/7, Linux CE/

ex Kernel 2.6.x. Corresponding adapter cables can be found in the catalog on the CD-ROM and

under www.navilock.com.

4. Functional test with u-Center 6

1. Install the u-Center software on your unit. Select the version suitable for your system. U-

Center is a pure test program and cannot be used for navigation or orientation. It must

always be closed after the test. It blocks the COM port and does not allow any access of

the navigation or route software to the COM port. It also serves for updating the Assist

GPS data and switching to EGNOS.

If the NMEA protocol is displayed in u-Center, but you cannot nd a receiver in the application

software, the connection problem is not with the receiver, but with the selected software setting.

In this case, the software manufacturer support center may be able to help you.

Product specificaties

Merk:	Navilock
Categorie:	GPS apparaat
Model:	NL-603P
Kleur van het product:	Zwart
Breedte:	65 mm
Diepte:	45 mm
Hoogte:	22 mm
LED-indicatoren:	Ja
Gebruiksaanwijzing:	Ja
Geïntegreerde geheugenkaartlezer:	Nee
Certificering:	IPX6
Interface:	MD6 Navilock
Frequentie:	1575.42 MHz
Ondersteunt Mac-besturingssysteem:	Ja
Oplaadbaar:	Nee
Gevoeligheid:	-162 dBmW
Ondersteunt Linux:	Ja
Andere ondersteundende systemen:	Android
Antenne:	Intern
Bedrijfstemperatuur (T-T):	-20 - 60 °C
Acquisitietijden - koud:	25 s
WAAS ontvangst:	Ja
GPS-nauwkeurigheid - plaats:	2.5 m
Update rate:	5 Hz
Baud snelheid:	9.6 Kbit/s
Navigatie protocollen:	GGA, GSA, GSV, RMC, VTG
Acquisitietijden - heet:	1 s
Navigation signals supported:	L1