Mpman CSU384PLL Handleiding

Mpman Radio CSU384PLL

Lees hieronder de 📖 handleiding in het Nederlandse voor Mpman CSU384PLL (24 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

CD Boombox

with PLL AM/FM Radio and USB Port

Model: CSU384PLL

www.mpmaneurope.com

Note: Please read and follow these instructions before using your unit.

WARNING

TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO

PREVENT BLADES EXPLOSURE.

TO PREVENT FIRE OR SHOCK HAZARD; DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

DO NOT INSTALL THIS EQUIPMENT IN A CONFINED SPACE SUCH AS A BOOK CASE OR

SIMILAR UNIT.

The lighting flash with

arrowhead symbol, with an

equilateral triangle is intended

to alert the user to the

presence of uninsulated

dangerous voltage within the

products enclosure that may

be of sufficient magnitude to

constitute a ris

k of electric

shock to persons.

CAUTION

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instruction in the literature

accompanying the appliance.

RISK OF ELECTRONICS

SHOCK

DO NOT OPEN

CAUTION: TO REDUCE

THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE

COVER (OR BACK). NO

USER SERVICEABLE

PARTS INSIDE REFER

SERVICING TO QUALIFIED

SERVICE PERSONNEL.

LASER SAFETY

This unit uses a laser. Only a qualified service

person should remove the cover or attempt to

service this device to avoid possible eye injure.

Caution: USE OF CONTROLS OR

ADJUSTMENT OF PERFORMANCE OF

PROCEDURE OTHER THAN SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

DANGER:

VISIBLE LASER RADIATION WHEN

OPEN AND INTERLOCK FAILED OR

DEFEATED. AVOID DIRECT EXPOSURE

TO LASER BEAM.

LOCATION OF CONTROLS

1. Speaker 11. CD door

2. POWER / SOURCE Button 12. Handle

3. MODE/MEMORY/PROG Button 13. FM Telescope Antenna

4. Button 14. E – VOLUM Battery Door

5. 15. Aux VOLUME + Button - in Jack

6. S < KIP / TUN Button 16. AC Socket

7. > SKIP / TUN Button 17 USB Slot

8. Button M+ / STOP

9. / PPLAY AUSE Button

10. LCD display

AC OPERATION

Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.

ATTENTION

1. Do not plug or unplug the power cable while you have wet hands;

2. When planning not to use this unit for a long time, disconnect the power cable from the wall

outlet;

3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to

avoid shock risks caused by damaged cable.

ENG 1

BATTERY OPERATION

Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert 6 pieces

UM- 2 "C" size batteries into the battery compartment with battery polarity as shown inside the

battery compartment.

SEQUENCE OF FUNTION MODE

The sequence o the function mode is f : “ CD → USB → AUX → FM Radio →AM Radio”

RADIO OPERATION

Press POWER / SOURCE button and select the desired radio mode.

MANUAL STATION SELECTION

1. Press the SKIP/T > T < UN or SKIP/ UN button step by step to tune to the desired radio stations

2. – Press VOLUME + or VOLUME Button for the desired volume level;

SEARCH STATION OPERATION

1. Press and hold the SKIP/TUN > or SKIP/TUN < button for approx. 1 second, it will start to search

the next radio station in the direction of the search.

2. The search operation simply finds stations with strong signals. Stations with weak reception can

only be tuned in manually.

3. Press VOLUME + or VOLUME – Button for the desired volume level;

ANTENNA

For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit

has a built in antenna, turn the whole unit for best reception.-

FM STEREO

When turn to a FM Stereo Broadcast, will be shown on the LCD display.“ST”

MEMORIZE RADIO STATIONS

1. Tune to the desired station.

2. button, Press MODE/MEMORY/PROG the LCD display will show ‘ P01.

3. T > Press SKIP/ UN or SKIP/TUN < button and s number of your progrelect the desired am

4. Press MODE/MEMORY/PROGRAM to store the radi station in the memory.o

5. Repeat steps from 1 to 3 to store more tracks in memory. You can store up to 20 radio

stations in the memory.

TO SELECT THE RADIO STATION IN THE MEMORY

Press M+ / STOP r button for the adio station memory and press the M+ / STOP button skip up to the

next memory station.

ENG 2

CD/MP3 PLAYBACK FUNCTION

To play a CD/MP3 disc, please follow the steps underneath:

1. Press POWER / SOURCE button and select the CD mode.

2. Open the CD door, Ins with the printed side facing up and close the CD door;ert the disc

3. Disc information (total number of tracks) will appear on the LCD displa and play y

automatically.

4. For MP3 disc, p and holdress the FOLDER button and LCD display will show “ ”FOLDER . Use

SKIP/TUN > or SKIP/TUN < button to select the folder you want to listen.

5. Press VOLUME + or VOLUME Button for the desired volume level;–

6. SPress TOP button to stop playing the disc.

Programming the CD/MP3 disc

T he programming of the CD should be done /MP3 disc during STOP mode.

1. Press MODE/MEM/FOLDER button, LCD display will show (XX indicates the preset ‘ PXX ‘

number of track to be programmed).

2. Press the SKIP/TUN > or SKIP/TUN < buttons to select the desired track.

Press the e this track in memoryMODE/MEM/FOLDER button again to stor .

3. Repeat steps from 2 to 3 to store more tracks in memory. You can store up to 20 tracks in the

memory for CD disc and 99 tracks in the memory for MP3 disc.

4. Press the PLAY/PAUSE button to play the disc in the programmed order.

5. To stop playing, press the STOP/M+ button.

6. To cancel the programming list, press the STOP button and open the CD door or /M+ press

SOURCE button.

Playing MP3 files with USB

1. Press the POWER / SOURCE Button to select the USB mode.

2. Plug your USB device into the USB port on the unit, the unit will start reading the files in the

USB device, it will show the total number of tracks of the device after reading and play from

track 001 automatically.

3. utton display P ress and hold /F bthe MODE/MEM OLDER and LCD will show “ ”FOLDER . Use

SKIP + - or SKIP button to select the folder you want to listen.

4. During playing, press the PLAY/PAUSE Button to temporarily pause playing. To resume,

press the Play/Pause Button again.

Skip Mode

1. Button During play or pause mode, press the SKIP + to go to the next track.

2. During play or pause mode, press the S Button to go back to the previous track.KIP -

ENG 3

Different Play Mode

Press the Mode Button to select different kinds of play mode with the following sequence.

For Audio CDs : Repeat ne Normal O  Repeat All 

For MP3 Files : Repeat One Repeat Folder Normal   Repeat All 

 – Repeat One repeat the track being played.

 – Repeat All repeat all the tracks in the storage media.

 – Repeat Folder repeat all the tracks in the entire album/folder.

 – Normal play the tracks in sequence

AUX IN CONNECTION

1. Press POWER / SOURCE button and select the Aux in mode. The display will show “AUX”.-

2. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out

jack or phones jack on your audio device and the other side to the aux in jack on the unit.-

3. Turn on your audio device and follow the playback instruction.

4. To stop this function, press SOURCE button to turn off your audio device.

Note:

Because of none andardized format definition/production of MP3 CD, playback quality & -st

performance are not guaranteed.

Manufacturer is not responsible for the playability of MP3 in any case due to recording conditions

such as PC performance, writing software, media ability and etc.

ENG 4

Product specificaties

Merk:	Mpman
Categorie:	Radio
Model:	CSU384PLL
Kleur van het product:	Roestvrijstaal
Aantal USB 2.0-poorten:	1
Gemiddeld vermogen:	- W
Ondersteund aantal accu's/batterijen:	6
Soort tuner:	Digitaal
Hoofdtelefoon uit:	Nee
AUX ingang:	Ja
Ondersteunde frequentiebanden:	FM
Apple docking-compatibiliteit:	Niet ondersteund
PLL-synthesizer:	Ja
Type batterij:	C