Roberts Blutune 7 Handleiding
Pagina's 2 Radio
Bekijk de handleiding van Roberts Blutune 7 gratis online of download de PDF. 12 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Radio | mains adaptor | quick start guide | safety/warranty leaet
Features
Controls
continued overleaf...
What is in the Box?
• DAB / DAB+ / FM RDS radio with colour display
• Bluetooth audio streaming from smartphone, tablet or laptop
• 40 presets (20 x DAB and 20 x FM)
• Separate bass and treble controls
• Telescopic aerial
• AC adaptor included / 6x AA/LR6 batteries (not included)
• 2x Stereo loudspeakers with tuned bass reex enclosure
• LCD colour dispay with adjustable dimmer
• 2 alarm timers with humane wake (DAB/FM or buzzer)
• Sleep and snooze timers
• Stereo auxiliary input and headphone sockets
1 Treble dial
Bass dial2
3 Preset buttons 1-5
Telescopic aerial4
Favourites button5
Info button 6
Menu/Back button7
8 Power/ Volume/Sleep
Loudspeaker9
10 Alarm 1 button
11 Mode button
12 LCD display
13 Alarm 2 button
14 Tuning, Select & Navigation
15 Headphone socket
16 Auxiliary input socket
17 DC input socket
18 Battery compartment
19 Software upgrade port (inside
battery compartment)
1
1012131411
1516171819
2
3
4
56
7
899
STEP 1 - Plug in & play DAB radio
B - Switch on your radio
1 Press the Power/Volumedial to switch on the radio. After each
use the radio will remember the mode used and then switch on
in that mode the next time it is used.
2 If this is the rst time the radio is used a scan of the Band III DAB
channels will be carried out.
A short press will switch your radio On or to Standby.
A short press will cancel an active alarm.
Rotate to adjust the volume level.
A long press will access the sleep timer when the unit is playing
A short press will access each operating mode in turn.
A short press will access the current menu system.
Press the Menu button to go back to a higher level menu or if an error is made.
Rotate clockwise or anti-clockwise to scroll menu items.
A short press on Tuning/Select will select highlighted menu items.
A short press on Tuning/Select will access snooze when an alarm sounds.
A short press will display information relating to the music being played.
A short press will change alarm status.
A long press will access alarm settings.
A short press will recall preset 1-5.
A long press will allow preset stations 1-5 to be saved.
A short press will recall presets from 1-30.
A long press will allow preset stations 1-30 to be saved.
Rotate the dials clockwise or anti-clockwise to increase/decrease the
amount of treble and bass.
1-5
Scanning...
Stations:115
Full Scan11:43
Current Aairs
FM
93.20MHz
11:43
C - Select a DAB radio station
1 If needed, press and release the button until the DAB Mode
mode is selected.
2 Rotate the Tuningcontrol to step through the list of available
DAB stations.
3 Press the Tuningcontrol to select the station. Adjust the Volume.
4 Some radio stations may have one or more additional broadcasts
associated with them. If these are available they will appear
immediately after the main station.
5 Press the Info button to cycle through the various display options.
The display options are scrolling text, program type, multiplex
name, channel / frequency, signal strength (the minimum signal
marker () shows the minimum strength needed for good DAB
reception), bit rate, date.
STEP 2 - Play FM radio
D - Scan for DAB stations
As time passes new stations may become available or you may
have moved to a different part of the country.
1 Press and release the button until DAB is selected.Mode
2 Press the Menu button, then highlight and press the ‘Scan’
Tuning control to select.
3 Your radio will perform a scan of the Band III DAB channels.
As new stations are found, they will be added to the list stored
in the radio.
A - Search tuning - FM
1 Fully extend the telescopic aerial.
2 Press and release the button until FM is selected.Mode
3 Rotate the Tuningcontrol clockwise or anti-clockwise to
manually tune your radio. Press the Tuningcontrol to scan
upwards or downwards (direction is set by the last manual
rotation). The radio will stop automatically when it nds a
station of sufcient strength.
4 If the signal is strong enough and there is RDS data present
then the radio will display the station name. Adjust the
Volume.
• Press the button to cycle through the various display Info
options.
The display options are scrolling text, program type,
frequency, audio type, signal strength, date.
STEP 3 - Bluetooth
1 Ensure Bluetooth is enabled on your smart device.
2 Ensure your radio is switched on. Press and release the Mode
button until the Bluetooth mode is selected on your radio.
3 The radio will show that it is ‘Looking for Device...’.
4 On your smart device select . Once the connection is ‘Blutune 7’
established, you may now play your music. Adjust the volume
on your Bluetooth device or on your radio.
Connecting Bluetooth devices
1 The audio player in your smart device may be able to respond
to the Play/Pause, Next or Previous track on the radio.
2 Press the Tuningcontrol to pause playback. Press the control
again to resume playback.
3 Rotate the control clockwise or anti-clockwise to skip to the
next or previous track.
Note:Not all player applications or devices may respond to
all of these controls.
1 To connect a different device, press the Menubutton, select
‘Disconnect’ and conrm ‘Yes’ by pressing the Tuningcontrol.
Your radio will become discoverable by other devices.
2 To clear all Bluetooth pairings, press the Menu button, select
‘Clear Pairing’ and conrm ‘Yes’ by pressing the Tuning
control.
Playing audio
Connect a different device
Whatever It
Takes
Bluetooth
Tristian’s iPhone
11:43
A - Connect to the mains
ON
Please read the safety leaet provided before connecting
your radio to the mains.
1 Place your radio on a at surface.
2 Fully extend the located on the top telescopic aerial
right hand corner.
3 Plug the cable from the mains adaptor into the DC
power input socket. Plug the mains adaptor into a wall socket and switch on the socket.
4 A start up screen will be displayed and a station scan will be performed.
5 When a signal has been found, the current time will appear on the display.
Note:If no signals are found it may be necessary to relocate your radio to a position giving
better reception and carry out a scan for new stations.
Product specificaties
| Merk: | Roberts |
| Categorie: | Radio |
| Model: | Blutune 7 |
Heb je hulp nodig?
Als je hulp nodig hebt met Roberts Blutune 7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Radio Roberts
Roberts Blutune 300L Handleiding Roberts iStream 3L Handleiding Roberts Stylus Luxe Handleiding Roberts Rambler Mini Handleiding Roberts Rambler Classic Handleiding Roberts Sound 49 Handleiding Roberts Play 11 Handleiding Roberts Stream 219 Handleiding
Alle Roberts Radio handleidingen
Populair in Radio
Roberts Revival iStream 3 Handleiding Roberts STREAM 94i Handleiding Roberts Blutune 300 Handleiding