Microchip UXN14M9PE Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip UXN14M9PE (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
UXN14M9P
SMD- Rev E00020
Subject Change Without Noticeto
1 of 10
Features
Wide Operating Range: DC 14
GHz
Contiguous Divide Ratios: 8 to 511
Large Output Swings: >1 Vpp/side
Single-Ended and/or Dierential
Drive
Size: 6mm x 6mm
Parallel Control Lines
Low SSB Phase Noise:
147 dBc @ 10 kHz Oset
Description
The UXN14M9P is a highly programma-
ble integer divider covering all integer
divide ratios between 8 and 511.
The device features single-ended
or dierential inputs and outputs.
Parallel control inputs are CMOS
and LVTTL compatible for ease of
system integration. The UXN14M9P
is packaged in a 40-pin, 6mm x 6mm
leadless plastic surface mount package.
Key Specifications (T = 25˚C):
Vee -3.3 = V, Iee = 185 mA, Zo=50 Ω
Application
The UXN14M9P can used be as a general
purpose, highly congurable, divider in
a variety of high frequency synthesizer
applications. Fast switching combined with
a wide range of divide ratios make the
UXN14M9P an excellent choice for fraction-
al-N and integer-N PLLs. Fractional division
may be achieved by applying a sequence to
the divider control lines, such as a delta-
sigma modulated sequence.
Pad Metallization
The QFN package pad metallization consists
of a 300-800 micro-inch (typical thickness 435
micro-inch or 11.04um) 100% matte Sn plate.
The plating covers a Cu (C194) leadframe.
The packages are manufactured
with a >1hr 150C annealing/heat treating
process, and the matte (non-glossy) plating,
specically to mitigate tin whisker growth.
Parameter
Description
Min
Typ
Max
Fin (GHz)
Input Frequency
DC*
-
14
Pin (dBm)
Input Power
-
0
+10
Pout (dBm)
Output Power
-
+4
-
PDC (W)
DC Power Dissipation
-
1.1
-
θjc (ºC/W)
Junction-Case Thermal Resistance
-
14
-
* frequency limit dependent input edge speedLow on
UXN14M9P
SMD- Rev E00020
Subject Change Without Noticeto
2 of 10
Frequency Divider Application
Min/Max Single-Ended Input Power, INP*
Input Sensitivity, T=25º Divide- -10, FRS=0C, by
Min/Max Single-Ended Input Power, INP*
Input Sensitivity, -3.3 Divide- -10, FRS=0V, by
Min/Max Single-Ended Input Power, INP*
Input Sensitivity, T=25º Divide- -10, FRS=1C, by
Min/Max Single-Ended Input Power, INP*
Input Sensitivity, -3.3 Divide- -10, FRS=1V, by
Output Power Output Power
UXN14M9P
SMD- Rev E00020
Subject Change Without Noticeto
3 of 10
Functional Block Diagram
Table 1: Pin Description
Port Name
Description
Notes
INP
Divider Input, Positive Terminal
CML signal levels
INN
Divider Input, Negative Terminal
CML signal levels
OUTP
Divider Output, Positive Terminal
CML signal levels
OUTN
Divider Output, Negative Terminal
CML signal levels
P0-P8
Divider Modulus Control (P8=MSB)
CMOS levels, see Equation 1, defaults to logic 0
VCC
RF & DC Ground
The paddle is connected to +VCC inside the package
VEE
-3.3 V @ 340 mA
Negative Supply Voltage
Equation 3:
Divider Modulus = N = P0 · 20 + P1 · 21 + P2 · 22 + ... + P8 · 28 for 8 ≤ N ≤ 511
Table CMOS Levels for control line P0-2: P8
Simplied Control Logic Schematic
Logic Level
Minimum
Typical
Maximum
1 (High)
Vcc-1.25 V
Vcc-0.8V
Vcc-0.8V
0 (Low)
Vee
Vee
Vee+1.25 V


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: UXN14M9PE

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip UXN14M9PE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Microchip

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd