Microchip SY58033U Handleiding

Microchip Niet gecategoriseerd SY58033U

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip SY58033U (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
1
M9999-072810
hbwhelp@micrel.com or (408) 955-1690
DESCRIPTION
■Precision 1:8, 400mV LVPECL fanout buffer
■Low-jitter performance:
• 76fsRMS phase jitter (typ)
■Guaranteed AC performance over temperature and
voltage:
• Clockfrequencyrange: DCto5.5GHz
• <80pstr / tf times
• <280pstpd
• <20psskew
■100kLVPECLcompatibleoutputs
■Fully differential inputs/outputs
■Accepts an input signal as low as 100mV
■UniqueinputterminationandVT pin accepts
DC-coupled and AC-coupled differential inputs:
(LVPECL, LVDS, and CML)
■Powersupply2.5V±5%or3.3V±10%
■Industrial temperature range: –40°C to +85°C
■Availablein32-pin(5mmx5mm)QFNPackage
FEATURES
ULTRA-PRECISION 1:8 FANOUT
BUFFER 400mV LVPECL OUTPUTS WITH
AND INTERNAL TERMINATION
Precision Edge®
SY58033U
APPLICATIONS
■AllSONETandallGigEclockdistribution
■AllFibreChannelclockanddatadistribution
■Networkroutingenginetimingdistribution
■High-end,low-skewmultiprocessorsynchronous
clockdistribution
Rev.: F Amendment: /0
Issue Date: October 2011
The SY58033U is a 2.5V/3.3V precision, high-speed, fully
differential 400mV LVPECL 1:8 fanout buffer. The SY58033U
is optimized to provide eight identical output copies with
less than 20ps of skew and only 76fsRMS phase jitter. It can
process clock signals as fast as 5.5GHz.
The differential input includes Micrel’s unique, 3-pin input
termination architecture that allows the SY58033U to directly
interface to LVPECL, CML, and LVDS differential signal
(AC- or DC-coupled) without any level-shifting or termination
resistor networks in the signal path. The result is a clean,
stub-free, low-jitter solution. The LVPECL (100k temperature
compensated) outputs feature a 400mV typical swing into
50 ohms loads, and provide an extremely fast rise/fall time
guaranteed to be less than 80ps.
The SY58033U operates from a 2.5V ±5% supply or
3.3V ±10% supply and is guaranteed over the full industrial
temperature range (–40°C to +85°C). Other high-speed 1:8
fanout buffers include the CML SY58031U and the 800mV
LVPECL SY58032U. The SY58033U is part of Micrel’s high-
speed, Precision Edge® product line.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
FUNCTIONAL BLOCK DIAGRAM
Precision Edge®
Precision Edge is a registered trademark of Micrel, Inc.
2
Precision Edge®
SY58033U
Micrel, Inc.
M9999-072810
hbwhelp@micrel.com or (408) 955-1690
PACkAGE/ORDERING INFORMATION
Pin Number Pin Name Pin Function
3,6 IN,/IN DifferentialSignalInput: Eachpinofthispairinternallyterminateswith50Ωtothe
VT pin. Note that this input will default to an indeterminate state if left open.
See “Input Interface Applications” section.
4 VT Input Termination Center-Tap: Each input terminates to this pin. The V
T pin provides a
center-tap for each input (IN, /IN) to the termination network for maximum interface
   exibility.See“InputInterfaceApplications”section.
2, 7, 17, 24 GND, Ground. Exposed pad must be connected to a ground plane that is the same potential
Exposed Pad as the ground pin.
1, 8, 9, 16, VCC Positive Power Supply: Bypass with 0.1µF||0.01µF low ESR capacitors as close to the
18, 23, 25, 32 pins as possible.
31, 30, 29, 28, 27, Q0, /Q0, Q1, /Q1, 400mV LVPECL Differential Output Pairs: Differential buffered output copy of the
 26,22,21,20,19, Q2,/Q2,Q3,/Q3 inputsignal.TheLVPECLoutputswingistypically400mVinto50Ω.Unused
15,14,13,12, Q4,/Q4,Q5,/Q5, outputpairsmaybeleftoatingwithnoimpactonjitter.See“LVPECLOutput”section.
11, 10 Q6, /Q6, Q7, /Q7
5 VREF-AC Bias Reference Voltage: Equal to V
CC–1.2V (approx.), and used for AC-coupled
applications. See “Input Interface Applications” section. When using V
REF-AC, bypass
with 0.01µF capacitor to VCC. Maximum sink/source current is 0.5mA.
PIN DESCRIPTION
32-PinQFN(QFN-32)
Ordering Information(1)
Package Operating Package
PartNumber Type Range Marking
SY58033UMG(3) QFN-32 Industrial SY58033U with
Pb-Free Pb-Free bar-line indicator
SY58033UMGTR(2, 3) QFN-32 Industrial SY58033U with
Pb-Free Pb-Free bar-line indicator
Notes:
1. Contact factory for die availability. Dice are guaranteed at T
A = 25°C, DC electricals only.
All devices are Pb-Free.
2. Tape and Reel.
3. Pb-Free package recommended for new designs.
3
Precision Edge®
SY58033U
Micrel, Inc.
M9999-072810
hbwhelp@micrel.com or (408) 955-1690
AbsoluteMaximumRatings(1)
Power Supply Voltage (VCC ) .......................–0.5V to +4.0V
Input Voltage (VIN) ...........................................–0.5V to V
CC
Current (VT)
Source or sink current on VT pin......................... ±100mA
Input Current (VT)
Source or sink current on IN, /IN .......................... ±50mA
Current (VREF)
Source or sink current on VREF-AC(3) ................... ±1.5mA
Lead Temperature Soldering (20 sec.) ...................... 260°C
Storage Temperature Range (TS ) ............ –65°C to +150°C
Operating Ratings(2)
Power Supply Voltage (VCC) ................. +2.375V to +3.60V
Ambient Temperature Range (TA) .............. –40°C to +85°C
Package Thermal Resistance(4)
QFN(θJA)
Still-Air ............................................................. 35°C/W
QFN(ψJB)
Junction-to-Board ............................................ 20°C/W
Symbol Parameter Condition Min Typ Max Units
VCC Power Supply Voltage 2.5V nominal 2.375 2.5 2.625 V
3.3V nominal 3.0 3.3 3.6 V
ICC Power Supply Current VCC = max. No. load includes current 180 250 mA
through50Ωpull-ups.  
VIH Input HIGH Voltage IN, /IN, Note 6 V CC–1.6 VCC V
VIL
Input LOW Voltage IN, /IN 0 V IH–0.1 V
VIN Input Voltage Swing IN, /IN, see Figure 1a. 0.1 1.7 V
VDIFF_IN Differential Input Voltage Swing IN, /IN, see Figure 1b. 0.2 V
|IN0, /IN0|, |IN1, /IN1|
RIN In-to-VTResistance 40 50 60 Ω
VT IN Max. In-to-VT (IN, /IN) 1.28 V
VREF-AC VCC–1.3 VCC–1.2 VCC–1.1 V
DCELECTRICALCHARACTERISTICS(5)
TA= –40°C to +85°C.
VCC = 2.5V ±5% or 3.3V ±10%; RL = 50ý to VCC–2V; TA= –40°C to +85°C unless otherwise stated
Symbol Parameter Condition Min Typ Max Units
VOH Output HIGH Voltage VCC–1.145 VCC–0.895 V
VOL
Output LOW Voltage VCC–1.545 VCC–1.295 V
VOUT Output Voltage Swing see Figure 1a. 150 400 mV
VDIFF_OUT Differential Voltage Swing see Figure 1b. 300 800 mV
Notes:
1. Permanent device damage may occur if “Absolute Maximum Ratings” are exceeded. This is a stress rating only and functional operation is not
implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to “Absolute Maximum Ratings” conditions for
extended periods may affect device reliability.
2. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings.
3. Due to the limited drive capability, use for input of the same package only.
4. Thermalperformanceassumesexposedpadissoldered(orequivalent)tothedevice’smostnegativepotential(GND)onthePCB.ψ
JB
uses 4-layer
θ
JA in still-air number unless otherwise stated.
5. ThecircuitisdesignedtomeettheDCspecicationsshownintheabovetableafterthermalequilibriumhasbeenestablished.
6. VIH (min) not lowers than 1.2V.
LVPECLDCELECTRICALCHARACTERISTICS(5)

Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: SY58033U

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip SY58033U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Microchip

Microchip

Microchip AT32UC3A3256 Handleiding

10 April 2024
Microchip

Microchip AT32UC3A364 Handleiding

10 April 2024
Microchip

Microchip AT32UC3B0256 Handleiding

10 April 2024
Microchip

Microchip AT32UC3A0512 Handleiding

10 April 2024
Microchip

Microchip AR1010 Handleiding

10 April 2024
Microchip

Microchip AT32UC3C0256C Handleiding

10 April 2024
Microchip

Microchip AT32UC3A364S Handleiding

10 April 2024
Microchip

Microchip AT32UC3C1256C Handleiding

10 April 2024
Microchip

Microchip AT32UC3A1128 Handleiding

10 April 2024
Microchip

Microchip AR1100BRD Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024