Mellerware 35430 Handleiding

Bekijk gratis de handleiding van Mellerware 35430 (2 pagina’s), behorend tot de categorie Heater. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over Mellerware 35430 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

REGISTER YOUR MELLERWARE WARRANTY

Thank you for purchasing a Mellerware product. Mellerware guarantees

that your product has been thoroughly inspected and tested before being

dispatched and is free from mechanical or electrical defects and complies

with the applicable safety standards. With every Mellerware product

purchased you will receive up to a 3 year warranty as detailed in the terms

and conditions below.

FIRST YEAR – 1 YEAR RETAIL WARRANTY

Should defects due to faulty parts or workmanship develop, under normal

domestic use, within 12 months from the original date of purchase please

return the product to the store from where it was purchased for a refund

or replacement at the discretion of the brand. Mellerware appliances are

intended for domestic use only and not for industrial or professional use.

The Warranty, if the product is used outside of domestic use or used in a

commercial environment, is reduced to 3 months with no extended war-

rantee available, all other terms and conditions applicable.

SECOND YEAR – OPTIONAL 1 YEAR ADDITIONAL EXTENDED

ONLINE WARRANTY REGISTRATION

Mellerware takes pride in its product quality and therefore offer an

extended 12 month warranty over and above the 1 Year Retail Warranty.

Should defects due to faulty material or workmanship develop, under normal

domestic use, after the initial 12 month period and within 24 months from

the original date of purchase, please return the product to Mellerware for

repair. Mellerware will assess and repair the product free of charge should

it be found to be a valid warranty claim and will return it to you directly.

Mellerware will replace a product with a similar product in the same or

better condition, if the repair cannot be conducted for whatever reason.

Should the product fall outside of the warranty, Mellerware will produce a

repair and delivery quotation for your approval.

NB: Registration should be completed at www.creativehousewares.co.za.

Should you experience any technical difculties you are welcome to

contact our customer service line on 086 111 5006 and one of our

consultants will gladly assist with the online warranty registration. Should

you not register the product within the 12 months of purchase, you will

automatically forfeit this extended warranty.

THIRD YEAR – OPTIONAL 1 YEAR ADDITIONAL EXTENDED

COMMUNICATION OPT IN WARRANTY

Mellerware takes pride in its product quality and therefore offer an addi-

tional 12 month warranty over and above the 1 Year Retail and 1 year

online registration warranty. Should defects due to faulty material or

workmanship develop, under normal domestic use, after the initial 12 month

period, the extended online registration 12 month period and within 36

months from the original date of purchase, please return the product to

Mellerware for repair. Mellerware will assess and repair the product free of

charge should it be found to be a valid warranty claim and will return it to

you directly. Mellerware will replace a product with a similar product in the

same or better condition, if the repair cannot be conducted for whatever

reason. Should the product fall outside of the warranty, Mellerware will

produce a repair and delivery quotation for your approval.

NB: Registration should be completed at www.creativehousewares.

co.za. Should you experience any technical difculties you are welcome

to contact our customer service line on 086 111 5006 and one of our

consultants will gladly assist with the online warranty registration and

opt-in email communication. Should you wish to qualify for the additional

third year extended warranty, you would need to have registered your

warranty within the rst 12 months from date of purchase and subscribed

to receive brand communication. The extended warranty is conditional

upon these requirements. Please note that you are however free to opt

out at any stage in accordance with the POPI act, this will however result

in you forfeiting this additional extended “communication opt in” warranty

from the recorded opt-out date.

Before returning your product, check the following:

• Your household mains supply socket is in good condition, working and

switched on.

• The mains supply circuit is not overloaded (white trip switch on your

DB board is off).

• You have read the trouble shooting guide in your Instructions for Use.

• All accessories and parts are present.

The following conditions apply:

1. Please ensure you retain your original receipt as this must be

presented when making a claim under the terms of the warranty.

It is impossible to determine the warranty period without proof of

purchase, so please keep this in a safe place. (NB. Your original receipt

can be scanned onto the Mellerware website [www.mellerware.co.za]

or Creative Housewares (Pty) Ltd [www.creativehousewares.co.za]

for safe storage.)

2. If a refund or exchange is required the product must be complete

with all accessories, parts and packaging. Missing parts will render the

warranty void. Any refund or exchange remains at the brands discre-

tion beyond the implied warranty granted by the CPA.

3. Upon receipt of your appliance, check it for any transport damage to

ensure it is safe for use. Return it to the store as soon as possible for

exchange if damaged. The warranty is void if products are damaged

after use, so please do not use a damaged product.

4. Any alteration made to the appliance purchased will void the warranty.

5. Your product is designed for normal domestic household use. Failure

to read and comply with the instructions for use, cleaning and

maintenance will render your warranty void, so please read these

instructions carefully to ensure your safety, and to get the most effec-

tive use from the product (e.g. not removing limescale; water deposits;

insect infestation, and/or burnt products).

6. Any abuse, negligent, improper or accidental use or care will render

the warranty void and Creative Housewares (Pty) Ltd will not be

liable for any loss or damage.

7. Any attempted repair, or replacement of unauthorised parts will ren-

der the warranty void, so please contact an authorised service centre

or service agent for any service or repair requirements.

8. NB: The warranty on replaced products will be from the original date

of purchase and not from when the date replacement was made.

9. All repairs carry a 3 month warranty even if this falls outside of the

warranty period.

10. Mellerware will attempt to conduct repairs within reasonable time,

this in line with industry standards but cannot be held responsible or

liable for any circumstances not under the brand’s control.

11. This warranty does not apply to glass components, lters, consum-

ables, and other parts subject to fair wear and tear.

Repairs out of the warranty period:

If service or repair becomes necessary outside the warranty period, this

service is still available however all transport/postage, spares and labour

costs will be for the customers’ account. All chargeable repairs will require

the customers’ written acceptance of the quote. Once the go-ahead has

been received Mellerware will undertake to conduct the repair within a

reasonable time and maintain the condition of the product as received. All

repairs carry a warranty of 3 months from the date of the repair.

For any service, enquiries and complaints, please contact our Customer

Care on 086 111 5006, e-mail [email protected] or WhatsApp on

+27 79 890 6867 from 08h00 to 15h00 Monday to Friday excluding

public holidays.

Please also note that the company is normally closed for 2 weeks around

Christmas and New Year.

Please send all products to one of the listed service centres.

ONLINE WARRANTY REGISTRATION

WHY REGISTER YOUR WARRANTY?

Mellerware pride ourselves on bringing premium quality appliances to market, and as a commitment to this level of quality we offer up to a

3 year warranty (1 Year Retail + 1 Year Extended Online warranty registration + 1 Year Extended opt-in communication warranty) on all of

our products. To take advantage of the Free Extended Warranty options you will need to register your warranty online within the rst year

of purchase in order to make a valid claim. Now you can register your product, upload your warranty online and never have to worry about

losing your receipt again. Enjoy the benet of up to 3 year’s warranty.

ADDED BENEFITS

In addition to providing you with an online prole of your registered products we will also provide a host of value added benets:

• Discount voucher on product warranty registration

• Incentives and Competitions for registered users

• New recipes or ideas for your products

• New product developments - be the rst to get the latest appliances

• Special offers on promotional items

• Open your internet browser and visit

www.mellerware.co.za

• Click on the “Register” link and create your username and

password. Or if you have done this already login with your

username and password.

• Click on “Register your Warranty” and follow the easy

instructions.

• Scan and upload your receipt.

DESKTOP/

LAPTOP

• Open your internet browser and visit

www.creativehousewares.co.za

• Click on the “Register” link and and create your username and

password. Or if you have done this already login with your

username and password.

• Click on “Register your Warranty” and follow the easy instructions.

• Scan and upload your receipt.

SMART PHONE/

TABLET

National Service Centre: 086 111 5006

e-mail: help@chwsa.co.za

www.creativehousewares.co.za

Notes:

1. The online warranty system is a safe storage facility for your receipt.

2. You will be required to register on the Mellerware or Creative Housewares website. You will receive a username and password once

registered. This will give you access to your prole.

3. From your prole you will be able to load products that you have purchased. In order to successfully register your warranty you will

need to scan and upload your receipt to us.

4. All instructions on how to load your products are available inside your prole.

5. Please note that you must check that your receipt has been uploaded correctly. Creative Housewares cannot be held responsible for

faxes or les not received.

6. For assistance with registration please email: help@chwsa.co.za

How to Register your Online Warranty?

1

Y

E

A

R

O

N

L

I

N

E

R

E

G

I

S

T

R

A

T

I

O

N

1

Y

E

A

R

R

E

T

A

I

L

W

A

R

R

A

N

T

Y

1

Y

E

A

R

C

O

M

M

U

N

I

C

A

T

I

O

N

O

P

T

-

I

N

terms & conditions applyterms & conditions apply

• Die beskermrooster op hierdie toestel voldoen aan standaardvereistes. Dit bied nie volledige

beskerming vir jong kinders of die sieklike nie. Die rooster is daar om risiko van besering te

voorkom, en geen deel daarvan moet verwyder of verander word nie.

• Hierdie toestel moet getoets word vir lek voor aanvanklike gebruik en telkens wanneer die

silinder na hervulling weer aangekoppel is. MOET NOOIT ‘N BLOTE VUUR GE BRUIK OM VIR

LEKKE TE TOETS NIE.

• Maak altyd seker dat kinders en troeteldiere te alle tye weg van die verwarmer gehou word

wanneer die verwarmer in werking is of selfs na gebruik. Laat nooit kinders of troeteldiere

rondom die verwarmer wees sonder toesig van ‘n volwasse persoon nie.

• Sluit altyd die gas silinderklep toe wanneer die verwarmer nie in gebruik is nie.

4. Installasie

Jou LPG-verwarmer is ‘n veilige en effektiewe vorm van verhitting wanneer dit presies volgens

hierdie instruksies gebruik word.

Lees en verstaan hierdie instruksies volledig voordat jy jou verwarmer bedryf. As jy nie die

instruksies verstaan nie, kontak asseblief jou handelaar vir advies voordat jy die verwarmer

gebruik.

Jy behoort ‘n geskikte butaangas silinder gekoop te hê (nie ingesluit nie). Die silinder vereis

ontlugging van lug die eerste keer as dit gevul word, om korrekte werking van die verwarmer te

verseker. Dit moet deur die gas vulstasie gedoen word. Jou silinder moet elke keer wanneer dit

deur ‘n gemagtigde vulstasie gevul word, nagegaan word vir veilige werking.

4.1. Verwarmer Opstelling

4.1.1. Nadat die verwarmer uit sy verpakking verwyder en korrek volledig geïnstalleer is.

4.1.2. Plaas die gevulde butaangas silinder agter in die verwarmer met die klepopening na buite.

4.1.3. Koppel die “snap-on compact” regulator wat voorsien is, aan die uitlaat van die gas

silinderklep. (Volg die instruksieblad wat voorsien is vir SNAP ON COMPACT LOW PRESSURE

REGULATOR).

4.1.4. BELANGRIKE TOETS vir lekke:

Dit moet in ‘n goed geventileerde area gedoen word, vry van enige oop vlamme of ander

ontbrandingsbronne. Met die regulator aan die silinder gekoppel, skakel die gas silinderklep aan

deur hom volledig teen die klok in te draai. Kwassie al die slangverbindings, pypverbindings aan

die gasklep, regulatorverbindings aan die silinder, en gas silinderklep met ‘n 50:50-oplossing

van wasmiddel en water. ‘n Stroom van borrels wat vorm, is ‘n aanduiding van ‘n lek. As ‘n lek

gevind word, draai die silinderklep toe (draai die regulatorhendel teen die klok in), ontkoppel

die regulator van die gas silinder, en verwyder die gas silinder na ‘n koel, buitelug, goed

geventileerde area. Kontak jou handelaar of gasverskaffer vir hulp.

MOET DIE VERWARMER NIE GEBRUIK NIE AS ‘N LEK GEVIND WORD.

MOET NIE ‘N BLOTE VUUR VIR LEKTOETSING GEBRUIK NIE.

MOET GEEN ELEKTRIESE TOERUSTING IN DIE PRESENSIE VAN ‘N GASLEK BEDRYF NIE.

4.1.5. Nadat die lektoets suksesvol uitgevoer is, pas die agterpaneel op die verwarmer. Dit mag

nodig wees om die silinder effens te draai om die regulator en slang binne die agterpaneel te

laat pas sonder dat die slang kink.

Nota: Die verwarmer het verskeie veiligheids-toestelle wat die verwarmer in onveilige toestande

sal afskakel. Die eerste is dat in geval van ‘n ongelukkige vlammisluiking, sal die gasverwarmer

outomaties afskakel. Die tweede toestel sal die verwarmer afskakel as dit omval. As dit gebeur,

sit die verwarmer regop, kyk vir duidelike skade, en wag weer 5-10 minute voordat jy probeer

om die verwarmer weer aan te steek. Hierdie toestel kan ook aktiveer as die verwarmer teen

iets gestamp of gestoot word.

4.2. Aansteek Instruksie:

A. Die verwarmer het drie instellings. Aansteek posisie (1) Minimum posisie (2). Medium

posisie (3) Maksimum posisie (4)

B. Skakel die gas in die houer aan.

1 2 3 4

4.3. Aansteek

• Open the valve on the heater cylinder by turning anti-clockwise.

• Use one hand Press down the control button for 10 seconds, at the same time press

down the

piezo igniter key with thumb finger of another hand. Continue this procedure until the pilot is.

ignited. Approximately 20 seconds later release the control button. At the moment if pilot is

ignited, it means that the heater is at its minimum position. If pilot flame goes out, please.

repeat this procedure.

4.4. Hittevlak instellings

• Om van minimum na medium te verander. Druk asseblief saggies die beheerknoppie in en

draai dit na posisie 2.

• Om van medium na maksimum te verander. Druk asseblief saggies die beheerknoppie in

en draai dit na posisie 3.

4.5. Afskakel

• Skakel die gas af op die houer. As die verwarmer vir ‘n tydperk nie gebruik sal word nie,

ontkoppel asseblief die regulator van die houer en plaas enige klep beskermingsprop of deksel

terug. As die verwarmer nie uitgaan nie, ontkoppel asseblief nie die regulator van die houer nie

en verwyder die verwarmer na buite en laat die gas in die houer opgebruik.

Waarskuwing!

Maak asseblief seker dat die beheerknoppie gesluit is nadat jy die posisie van die beheerknop

verander het in ooreenstemming met die rigting van die pyl. Die beheerknoppie kan nie gedraai

word as dit nie ingedruk is nie.

4.6. Elektriese dele:

• Skakel die krag aan/af, ‘’AF’’ is krag af, wanneer jy dit op ‘’AAN’’ draai, sal een kwartsbuis

werk.

• Hou die skakelaar op ‘’AAN’’, draai dan die skakelaar na ‘’II’’. Die tweede kwartsbuis sal

werk. As dit na ‘’O’’ gedraai word, sal die tweede kwartsbuis afgeskakel wees.

• Hou die skakelaar op ‘’AAN’’, draai dan die skakelaar na ‘’III’’. Die derde kwartsbuis sal werk.

As dit na ‘’O’’ gedraai word, sal die derde kwartsbuis afgeskakel wees.

• As dit vereis word dat al drie kwartsbuise gelyktydig werk, hou dan die skakelaar op ‘’AAN’’,

draai dan die skakelaar na ‘’II’’ en ‘’III’’. Let asseblief op dat die skakelaars nie afsonderlik werk

sonder dat hulle albei op ‘AAN’ is.

4.7. Koppeling van die gas silinder:

4.7.1. Plaas die vol gas silinder agter in die verwarmer.

4.7.2. Klik die gasreguleerder aan die gas silinder vas.

4.7.3. Draai die gas aan by die regulator wat aan die silinder gekoppel is.

4.7.4. Ons beveel aan dat jy ‘n butaangas silinder gebruik.

4.7.5. BELANGRIKE TOETS VIR LEKKASIE: Dit moet in ‘n goed geventileerde area gedoen

word, vry van blote vlamme en enige ander ontbrandingsbronne. Met die regulator wat aan

die silinder gekoppel is, skakel die regulatorkontrole aan. Kwassie alle verbindings vanaf

die gas silinder na die klep van die toestel met ‘n oplossing van wasmiddel en water of ‘n

lekdetecteerspuit. ‘n Vloei van borrels wat vorm, dui op ‘n lek. As ‘n lek gevind word, draai af

by die regulator en ontkoppel die regulator van die silinder en verwyder die gas silinder buite of

na ‘n goed-geventileerde area. MOET DIE VERWARMER NIE GEBRUIK NIE. Skroef die agterkant

na lekkasietoets terug.

4.8. Hoe om die silinder te verander:

4.8.1. Draai die regulator af (draai die regulatorhefboom klokwys om die klep te sluit) en laat die

verwarmer heeltemal afkoel voordat die silinder verwyder en vervang word. Moet nie probeer

om die silinder te vervang terwyl die verwarmer nog in gebruik is nie.

4.8.2. Silinders moet in ‘n omgewing sonder vlamme vervang word.

4.8.3. Moet nie rook terwyl jy die silinder vervang nie.

4.8.4. Wanneer jy jou leë silinder moet vervang, draai die gas af by die regulator en haal die

leë silinder uit die verwarmer.

4.8.5. Verwyder die regulator van die leë silinder.

4.8.6. Volg die stappe beskryf onder “Koppeling van die gas Silinder”, koppel ‘n nuwe

silinder aan.

Let op!

Om die gasverwarmer by die silinder af te skakel, draai die skakelaar op die regulator na die

AF-posisie. As die verwarmer vir ‘n tydperk nie gebruik gaan word nie, ontkoppel die regulator

van die silinder en vervang enige klepbeskerming of bedekking.

Moet asseblief nie die beheerknop gewelddadig draai nie; die knoppie moet saggies ingedruk

word voordat die beheerknop gedraai word. Die beheerknop kan nie sonder om dit af te druk,

gedraai word nie.

Maak seker dat die knoppie vasgesluit is in die vereiste verhittingsposisie na gebruik.

VOORSIGTIG - Sommige dele van hierdie produk kan baie warm word en brandwonde

veroorsaak. Besondere aandag moet geskenk word waar kinders, troeteldiere en kwesbare

mense teenwoordig is.

5. Berging:

5.1. Ontkoppel die silinder en verwyder dit uit die toestel.

5.2. Berg silinders in ‘n goed geventileerde area weg van brandbare materiaal. Berging moet

verkieslik buite wees. Silinders mag nie in ‘n kelder of in hoogbouwoonstelle gestoor word nie.

5.3. Die verwarmer moet bedek en in ‘n droë, stofvrye area in sy oorspronklike verpakking

gestoor word.

6. Skoonmaak:

6.1. Gebruik ‘n klam seepagtige lap om die buitekant en silinder berging area van jou verwarmer

skoon te maak.

6.2. Maak seker dat geen water op die branders of pilot/lig-area kom nie. Vee die verwarmer

heeltemal droog voor gebruik.

6.3. Moet nie skuurmiddels gebruik nie, omdat hulle die kwaliteit van die verfspuit kan beskadig.

7. Instandhouding:

• Kontroleer die buigbare buis tussen die regulator en verwarmer voor elke gebruik en

vervang dit indien verweer, verslet of beskadig. Oorweeg in enige geval sy vervaldatum om

die buis te vervang.

• Kontak die agent genoem op die laaste bladsy van hierdie handleiding indien enige groot

instandhouding benodig word.

• Dit word aanbeveel dat die verwarmer elke twee jaar deur gemagtigde personeel onderhou

word.

8. Probleemoplossing

SIMPTOMEFOUTMIDDEL

1. Die pilotvlam sal nie outoma-

ties aansteek nie.

Geen vonk oor die

electrode-opening.

a) Maak seker dat die piezoelektriese aansteker

korrek funksioneer.

(b) Kontrolleer dat die elektriese leiding nie

beskadig is nie.

2.Die pilotvlam sal nie outomaties

aansteek nie, maar punte (a) tot

(e) is bevredigend en die pilot sal

‘n vuurhout aansteek.

Onkorrekte

posisie van vonk

in verhouding tot

pilotgasvloei.

Herposisioneer die vonkprop sodat die vonk oor

die gasvloei spring.

3. Verwarmer sal nie

aanbly wanneer druk van die

ontbrandingsknoppie af verwyder

word nie.

Elektromagnetiese

klep sluit terwyl die

verwarmer aan is.

(c) Maak seker dat die termokoppelsonde in die

pilotvlam geplaas is.

(d) Verseker ‘n goeie verbinding tussen die

termokoppel en klep.

(e) Kontrolleer die termokoppel.

(f) Kontrolleer die elektromagnetiese klep. (deur

‘n diensman)

4. Na oorskakeling na die maksi-

mum posisie met al drie panele

aan, lyk een of meer panele

onder normale intensiteit.

(a) Versperde

stralers.

(b) Gedeeltelik

versper die

toevoerbuis.

(a) Verwyder en skoon die versperde straler.

(b) Verwyder die toevoerbuis, verwyder stralers en

blaas deur die buis.

5. Probleme met die oorsteek van

aansteking vanaf posisie 1 na

posisie 2 of 3.

a) Lugtrek gerig

weg van die eerste

paneel.

(b) Posisie van die

pilotvlam.

(a) Verander die ligging van die toestel sodat dit nie

nadelig beïnvloed word deur lugtrek nie.

(b) Posisioneer die pilot sodat die vlam oor die

onderste hoek van die tweede paneel impakteer,

sowel as die eerste paneel.

6. Reuk van verbrandingOntbrekende stuk

van keramiese

vuurvaste klei.

Inspekteer die omtrek van elke paneel en vind die

plek waar ‘n bietjie vuurvaste klei verskuif is.

Kontak die plaaslike diens.

Herstelwerk moet slegs deur gemagtigde personeel uitgevoer word.

9. Herwinning:

9.1. Hierdie elektriese produkte, kabels, batterye, verpakking en die handleiding moet nie met

algemene huishoudelike afval gemeng word nie. Vir behoorlike herwinning, neem asseblief

English

Dear Customer

Thank you for choosing to purchase a Mellerware brand product. Thanks to its technology,

design and operation and the fact that it exceeds the strictest quality standards, a fully satisfac-

tory use and long product life can be assured.

1. Parts description

1. Quarts tubes ON/OFF switch

2. Igniter button

3. Gas regulator control

4. Quartz tubes

5. Ceramic heating panels

6. Castor wheels

7. Top panel

8. Left panel

9. Right panel

10. Bottom panel

11. Gas valve

12. Back Panel

2. Safety advice and warnings!

Read these instructions carefully before

switching on the appliance and keep them for future reference. Failure to

follow and observe these instructions could lead to an accident. Clean all

the parts of the product as indicated in the cleaning section, before use.

2.1. Use or working environment.

2.1.1. This appliance is designed solely for domestic use and for the designated purpose.

2.1.2. Do not use the appliance outdoors (unless it has been specifically designed for outdoor

use)

2.1.3. Use the appliance in a well ventilated area.

2.1.4. Do not subject the appliance to heat, direct sunshine or very high moisture (e.g. Rain)

2.1.5. Never immerse the appliance in liquids and be aware of sharp edges that may damage it.

2.1.6. Never use the appliance with wet or damp hands. Turn off immediately if the becomes wet

or damp when it is running.

2.1.7. Keep children and bystanders away when using this appliance.

2.1.8. Do not place flammable material near the appliance.

2.1.9. Do not use the appliance in association with a programmer, timer or other device that

automatically switches it on.

2.1.10. Do not use the appliance if its damaged.

2.1.11. If any of the appliance casings breaks, immediately turn off the appliance.

2.1.12. Do not use the appliance if it has fallen on the floor or if there are visible signs of damage.

2.1.17. Do not force the power cord. Never use the power cord to lift up, carry or unplug the

appliance (if applicable).

2.1.18. Do not wrap the power cord around the appliance (if applicable).

2.1.19. Do not clip or crease the power cord (if applicable).

2.1.20. Do not allow the power cord to hang or to come into contact with the hot surfaces of

the appliance (if applicable).

2.1.21. Check the state of the power cord. Damaged or tangled cables increase the risk of

electric shock (if applicable).

2.1.22. The appliance is not suitable for outdoor use.

2.1.23. Power cord should be regularly examined for signs of damage, and if the cord is dam-

aged, the appliance must not be used (if applicable).

2.1.24. Do not touch the plug with wet hands (if applicable).

2.1.25. Ensure the room is ventilated while the heater is in operation. Do not operate in a

bedroom, caravan, boat or any confined spaces.

2.1.26. Do not place the heater near walls, curtains or furniture while in operation. Always face

the heater towards the center of the room during operation.

2.1.27. Do not place objects on or against the heater.

2.1.28. This is a low pressure appliance to be used only with a 2.8kPa SANS 1237 approved

regulator.

2.1.29. DO NOT TAMPER OR MODIFY THE APPLIANCE

2.2. Personal safety:

2.2.1. Do not leave the appliance unattended during use as there is a risk of an CAUTION:

accident.

2.2.2. Do not touch the heated parts of the appliance, as it may cause serious burns.

2.2.3. This appliance is only for domestic use, not for industrial or professional use. It is not

intended to be used by guests in hospitality environments such as bed and breakfast, hotels,

motels, and other types of residential environments, even in farm houses, areas of the kitchen

staff in shops, offices and other work environments.

2.2.4. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given super-vision or instruction concerning use of the appliance by a person responsible

for their safety.

2.2.5. This appliance is not a toy. Children should be supervised to ensure that they do not play

with the appliance.

2.2.6. It is illegal and dangerous to change or modify any part of this appliance.

2.3. Use and care:

2.3.1. Fully unroll the appliance’s power cable before each use (if applicable).

2.3.2. Do not use the appliance if the parts or accessories are not properly fitted.

2.3.4. Do not turn the appliance over while it is in use or connected to the mains power supply

(if applicable)..

2.3.5. Unplug the appliance from the mains power supply when not in use and before undertak-

ing any cleaning task (if applicable).

2.3.6. This appliance should be stored out of reach of children.

2.3.7. Do not store the appliance if it is still hot.

2.3.8. Never leave the appliance unattended when in use and keep out of the reach of children.

2.3.9. Unplug the appliance from the mains supply socket after use and before every cleaning.

Pull the plug, not the mains cable, in order to disconnect the appliance from the mains (if

applicable).

2.3.10. If, for some reason, the appliance were to catch fire, disconnect the appliance from the

mains power supply and DO NOT USE WATER TO PUT THE FIRE OUT.

2.3.11. This appliance needs to be tested for leaks before initial use and whenever the cylinder

has been reconnected after being filled. NEVER USE A NAKED FLAME TO TEST FOR LEAKS.

NOTE: The heater incoporates several safety devices that will shut down the heater in unsafe

conditions.

•ODS (Oxygen depletion system) In case of accidental flame failure, the gas heater will shut

down automatically.

The Tip Over Switch will turn off the heater if it is not standing upright on a level surface. If this

activates, set the heater upright, check for obvious damaage and again wait 10-15 minutes

before attempting to re-ignite the heater. This device may also operate if the heater is knocked

against or bumped.

2.4. Service:

2.4.1. Make sure that the appliance is serviced only by suitably qualified technician, and that only

original spare parts or accessories are used to replace existing parts/accessories.

2.4.2. If the power cord is damaged, the manufacturer or its service agent or a similarly qualified

person must replace it in order to avoid a hazard (if applicable).

2.4.3. Any misuse or failure to follow the instructions for use renders the guarantee and the

manufacturer’s liability null and void.

3. Instructions for use:

3.1. Before use:

3.1.1. Remove the appliance’s protective film (if applicable).

3.1.2. Unwind the power cord (if applicable).

3.1.3. Check if the nose cone is present, secure and in good condition (Figure 1).

3.2. Use and care:

3.2.1. Assembly

1. For your safety, please follow the assembly instructions step by step as provided below.

Contents:

1 x Folded heater, 1 x Cross head screwdriver, 1 x Spanner

4 x Caster wheels with washers & nuts, 8 x Large screws,

6 x Small screws, 2 x Corner gauge plates

Upper panel1. Remove the heater from the packaging carefully and Check

for any damage before use. The screws, fixing tools And

castors are located in the box at the rear.

2. Turn out left side and right-side Panel at a 90 degree angle

and open Out bottom panel.

3. Left side, right side panel and bottom at a 90 degree angle.

4. Align the position and fasten the left side panel, right side

panel and bottom panel with the bigger size Screws (included)

at the 4 points Shown.

5. Open the upper panel on heater. Match the position and

insert the gauge plates into the slots of the upper panel

first. Secure them using the bigger size screws (included).

At the 4 points shown.

6. Secure the top panel to the front panel by using the small

size screws (included) at the 2 points shown.

7. Following the direction of arrows, fasten the small screws

to install the back panel and the washers + nut (included) to

install the castors.

3.3. Warning & safegaurds!

3.3.1. Never attempt to light if the hose appears loose or damaged in any way.

3.3.2. Do not press the ignition button for more than 40 seconds.

3.3.3. Never disconnect the regulator while cylinder valve or regulator is on.

3.3.4. Don’t change cylinders in area which open fire exists.

3.3.5. Don’t expose your cylinder to extreme heat.

3.3.6. Do not store any other cylinders in the room in which your heater is being used.

3.3.7. Do not insert your finger or any other material or object through the safeguard

of the heater as this could result in serious burns or fire!

3.3.8. Leave at least 1 meter distance between your heater and any other heat source.

3.3.9. Do not let unauthorized persons tamper with your heater.

3.3.10. Do not use appliance under electrical socket outlets.

3.3.11. Do not use the heater in bathrooms, showers or swimming pool, leisure vehicles such

as caravans or auto caravans.

3.3.12. This heater must not be used without a gas cylinder and regulator fitted for stability

purposes.

3.3.13. Do not cover your heater. Fabrics, clothing, hangings, net curtains, bed linens and other

flammable materials may ignite if placed against the outlets of your heater.

3.3.14. In the event of leakage, the appliance should be turned off immediately either at the gas

container valve or at the regulator switch-on valve, disconnect the regulator from the cylinder.

3.3.15. Turn off the appliance at the regulator switch on valve and the regulator after use,

disconnect the cylinder.

3.3.16. Only use in well ventilated areas

3.3.17. The guard on this appliance is to prevent risk of fire or injury from the burner and no part

of it should be permanently removed. IT DOES NOT GIVE PROTECTION FOR YOUNG CHILDREN,

PETS OR THE INFIRM.

3.3.18. Do not move the appliance when operating, shocks and bumps may activate the

safety device.

3.3.19. Fire risk exists if the heater is covered or positioned incorrectly. Always ensure that you

position this heater in the centre of the room away from any flammable objects or materials.

3.3.20. The fireguard of this heater is intended to prevent direct access to heating elements and

must be in place when the heater is in use.

3.3.21. WARNING: In order to avoid overheating, do not cover the heater.

3.3.22. Children and pets should be kept away from heater and continuously supervised when

around the heater. Maintenance should not be carried out by children whatsoever.

3.4. Safety precautions

Always use Heater in accordance with instructions supplied with each

heater. Keep instructions in a safe place.

DO NOT place clothes or other material on the heater. This could cause

a fire risk/or affect.

DO NOT position heater close furniture.

DO NOT move heater from room to room when lit.

DO NOT position heater close to walls, furniture, net curtains, bed linen or

any flammable materials as this could result in a risk of fire. The following

minimum distances should be respected: 50 cm from the sides and

100cm from the front. ALWAYS face the heater towards the centre of the

room. The heater should be positioned on a level surface at all times.

If a leak is suspected. DO NOT disconnect the regulator. Turn off the gas

supply at the gas regulator. Take the appliance outdoors in a flame free

atmosphere. Turn on the gas supply and check all the connections. Slowly

brush the connections with soapy water solution or a leak detection spray,

a gas leak will form bubbles. If a leak is found turn the gas off. DO NOT

use the heater again until it has been checked by a competent person in

accordance with the Gas Safety installations and use Regulations 1998.

Important:

Read the instructions in this manual carefully. It has important information both for operation

and your safety.

• Do not use faulty appliances.

• Maintenance and repairs must be carried out by a qualified technician only.

• Your heater should be checked annually by a qualified technician or gas engineer for safe

operation and to detect any faults.

• Retain these instructions for future reference

3.5. Safety Information

• This is a flueless heater. Ensure the room is well ventilated while the heater is in operation. Do

not operate in a bedroom, caravan, boat, or any room less than 80 cubic metres. This heater is

not suitable for small confined spaces.

• Do not place the heater near walls, curtains, flammable objects/liquids or furniture while in

operation as this could cause a fire hazard! The heater should always be facing towards the

centre of the room. Correct position indicated as here:

• The heater must not be moved whilst operational.

• Do not place objects on or against the heater at any time.

• The dress guard on this appliance conforms to standard requirements. It does not give full

protection for young children or the infirm. The guard is to prevent risk of injury and no part of it

should be removed or altered.

• This appliance needs testing for leak before initial use and whenever the cylinder has been

reconnected after being filled. NEVER USE A NAKED FLAME TO TEST FOR LEAKS.

• Always ensure children and pets are kept away from the heater at all times when the heater

is in use or even after use. Never leave children or pets around the heater when unattended by

adult supervision.

• Always close the gas cylinder valve whenever the heater is not in use.

4. Installation

Your LPG heater is a safe and efficient form of heating when used exactly according to these

instructions.

Read and fully understand these instructions first before operating your heater. If you do not

understand the instructions, please contact your dealer for advice before using the heater.

You should have purchased suitable Butane gas cylinder (not included). The cylinder will require

purging of air the first time it is filled, to ensure correct operation of the heater.

This should be carried out by the gas filling station. Your cylinder should be checked for safe

operation each time when it is filled by an authorized filling station.

4.1. Heater set-up

4.1.1. After the heater has been removed from its packaging and fully assembled correctly.

4.1.2. Place the filled Butane gas cylinder into the back of the heater with the valve outlet

facing outwards.

4.1.3. Connect the “snap on compact” regulator provided onto the outlet of the gas cylinder

valve. (Follow instruction sheet provided for SNAP ON COMPACT LOW PRESSURE REGULATOR).

4.1.4. IMPORTANT TEST for leaks:

This must be carried out in a well-ventilated area, free from any open flames or other sources

of ignition. With the regulator connected to the cylinder, turn on the gas cylinder regulator valve

by turning fully anti-clockwise. Brush all hose connections, pipe connections to the gas valve,

regulator connection to the cylinder and gas cylinder valve with a 50:50 solution of detergent

and water. A stream of bubbles forming is an indication of a leak. If a leak is found, turn off the

cylinder valve(turn the regulator lever clockwise), disconnect the regulator from the gas cylinder

and remove the gas cylinder to a cool, outdoor well-ventilated area.

Contact your dealer or gas supplier for assistance.

DO NOT USE THE HEATER IF A LEAK IS FOUND.

DO NOT USE A NAKED FLAME FOR LEAK TESTING.

DO NOT OPERATE ANY ELECTRICAL EQUIPMENT IN THE PRESENCE OF A GAS LEAK.

4.1.5. After leak-testing is satisfactorily carried out, fit the rear panel onto the heater. It may be

necessary to twist the cylinder slightly to allow the regulator and hose to fit inside the back panel

without kinking the hose.

Note: The heater incorporates several safety devices that will shut down the heater in unsafe

conditions. The first is that in case of accidental flame failure, the gas heater will shut down

automatically. The second device will turn off the heater if it is tipped over, if this activates, set

the heater upright, check for obvious damage and again wait 5- 10 minutes before attempting to

re-light the heater. This device may also operate if the heater is knocked against or bumped.

4.2. Lighting Instruction:

A. The heater has three settings. Lighting position(1) Minimum position (2). Medium position

(3) Maximum position (4)

B. Turn on the gas in the container.

1 2 3 4

4.3. Lighting

• Open the valve on the heater cylinder by turning anti-clockwise.

• Use one hand Press down the control button for 10 seconds, at the same time press down the

piezo igniter key with thumb finger of another hand. Continue this procedure until the pilot is.

ignited. Approximately 20 seconds later release the control button. At the moment if pilot is

ignited, it means that the heater is at its minimum position. If pilot flame goes out, please repeat

this procedure.

4.4. Heat level settings

• To change from minimum to medium. Please gently press down the control button and turn.

it to position 2.

• To change from medium to maximum. Please gently press down the control button and turn.

it to position 3.

4.5. Switching off

• Turn off the gas on the container. If the heater will not be used for a period of time, please.

disconnect the regulator from the container and replace any valve protection plug or cover. If

the heater does not extinguish, please do not disconnect the regulator from the container and

remove the heater outdoors and let the gas in the container use up.

Attention!

Please be sure the control button has been locked after you change the position of control

knob followed by the direction of arrow. The control button can’t be turned if you haven’t

pressed it down.

4.6. Electrical parts:

• Switch of power on/off, ‘’OFF’’ is power off, when turn on ‘’ON’’, one quartz tube will be

working.

• Keeping the switch on ‘’ON’’, then turn the switch to ‘’II’’. The second quartz tube will be

working. If turn to ‘O’, the second quartz tube will be powered off.

• Keeping the switch on ‘’ON’’, then turn the switch to ‘’III’’. The third quartz tube will be work-

ing. If turn to ‘O’, the third quartz tube will be powered off.

• If three quartz tubes are required to work simultaneously, place keeping the switch on ‘ON’,

then turn the switch and switch on ‘’II” and “III”. Pls notice. switch and switch do not work

alone without switch on.

4.7. Connecting the gas cylinder:

4.7.1. Place the gas filled cylinder into the back of the heater.

4.7.2.Clip on the gas regulator to the gas cylinder.

4.7.3.Turn the gas on at the regulator attached to the cylinder.

4.7.4.We recommend that you use a Butane gas cylinder.

4.7.5.IMPORTANT TEST FOR LEAKAGE: This must be carried out in a well-ventilated area, free

from naked flames and any other sources of ignition. With the regulator connected to the cylinder

turn on the regulator control. Brush all connections from gas cylinder to the valve of appliance

with a solution of detergent and water or a leak detection spray. A stream of bubbles forming

indicates a leak. If a leak is found turn off at the regulator and disconnect the regulator from the

cylinder and remove the gas cylinder outdoors or to a well- ventilated area. DO NOT USE THE

HEATER. Contact your gas supplier for assistance. Fix the rear cover after leakage test.

4.8. How to change cylinder:

4.8.1. Turn off at the regulator (turn the regulator lever clockwise to close the valve) and allow

the heater to cool fully before removing and replacing the cylinder. Do not attempt to replace the

cylinder whilst the heater is still in use.

4.8.2. Cylinders must be replaced in a flame free environment.

4.8.3. Do not smoke while changing the cylinder

4.8.4. When you need to replace your empty cylinder, turn the gas off at the regulator and take

the empty cylinder out of the heater.

4.8.5. Remove the regulator from the empty cylinder.

4.8.6. Follow the steps described under “Connecting the gas Cylinder”, connect a new cylinder.

Attention!

To turn off gas heater at cylinder turn the switch on the regulator to the OFF position. If the

heater is not be used for a period of time disconnect the regulator from the cylinder and replace

any value protection or cover.

Please do not forcefully turn the control knob, the button should be pushed down gently before

turning the control knob. The control knob cannot be turned without pushing downwards.

Ensure the knob is locked into the heating position required after operation.

CAUTION-Some parts of this product can become very hot and cause burns. Particular atten-

tion has to be given where children, pets and vulnerable people are present.

5. Storage:

5.1. Disconnect the cylinder and remove it from the appliance.

5.2. Store cylinders in a well-ventilated area away from combustible material. Storage should

preferably be outdoors. Cylinders must not be stored be in a basement or in high-rise flats.

5.3. The heater should be covered and stored in a dry, dust-free area in its original packaging.

6. Cleaning:

6.1. Use a damp soapy wrung out cloth to clean the exterior and cylinder storage area of

your heater.

6.2. Make sure that no water gets onto the burners or pilot/light area. Wipe the heater

completely dry before use.

6.3. Don’t use abrasive cleaners as they may damage the quality of paint finish.

7. Maintenance:

• Check flexible tube between regulator and heater before every operation and replace it if

perished, worn or damaged. In any case consider its expiration date to replace the tube

• Contact agent named on last page of this manual if any major maintenance is needed.

• It is recommended that the heater is maintained every two years by authorized personnel.

8. Trouble shooting:

SYMPTOMSFAULTREMEDY

1. Pilot will not light

automatically.

No spark across

electrode gap.

a) Ensure that piezo-electric igniter is function-

ing correctly.

(b) Check that electrical lead is not damaged.

2. Pilot will not light

automatically, but points (a) to

(e) are satisfactory and the pilot

will light a match.

Incorrect position of

spark in relation to

pilot gas flow.

Re-position spark plug so that spark jumps

across gas flow.

3. Heater will not remain alight

when pressure is released from

ignition button.

Electro-magnetic

valve closes whilst

heater is alight.

(c) Ensure that thermocouple probe is located

in pilot flame.

(d) Ensure good connection between thermocouple

and valve.

(e) Check thermocouple.

(f) Check electromagnetic valve. (by service man)

4. After changing to maximum

position with all three plaques

alight. One or more plaques ap-

pear below normal intensively.

(a) Blocked jets.

(b) Partially blocked

the supply tube.

(a) Remove and clean blocked jet.

(b) Remove supply tube, remove jets and blow

through the tube.

5. Difficulty in cross lighting from

position 1 to position 2 or 3.

(a) Air draught

directed away from

the first plaque.

(b) Position of the

pilot flame.

(a) Change the location of the appliance so that it is

not adversely affected by air draught.

(b) Position pilot so that flame

impinges across bottom corner of 2nd plaque as

well as 1st plaque.

6. Smell of combustion.Missing piece of

ceramic fireclay.

Inspect perimeter of each plaque and locate place

where some fireclay has been displaced. Turn to

the local service.

Repair to be conducted by authorised personnel only

9. Recycling

9.1. These electrical products, cables, batteries, packaging, and the manual, should not be

mixed with general household waste.

For proper recycling, please take these products to your nearest Creative Housewares office

where they will be accepted for recycling free of charge.

9.2. Alternatively, please contact your local authority or household waste disposal service

for further details of your nearest designated collection point. Correct product disposal saves

resources and prevents negative effects on human health and the environment.

--------------------------------------------------------------------------------

Afrikaans

Geagte kliënt,

Dankie vir u keuse om ’n Mellerware handelsmerk produk te koop. Danksy die tegnologie,

ontwerp en werking en die feit dat dit vol- doen aan die strengste gehalte standaarde, is U

verseker van ’n volle bevredigende gebruik en lang produklewe.

1.Deelbeskrywing

1.Kwartsbuise AAN/AF-sleutel

2. Aanstekerknoppie

3. Gasreguleerbeheer

4. Kwartsbuise

5. Keramiese verhittingspanele

6. Wiele

7. Bopaneel

8. Linker paneel

9. Regter paneel

10. Onderpaneel

11. Gasklep

12. Agterpaneel

2. Veiligheidsadvies en waarskuwings!

Lees hierdie instruksies sorgvuldig voordat

u die toestel aanskakel en hou dit vir

toekomstige verwysing. Nalatigheid om hierdie

instruksies na te kom en te volg, kan lei tot ‘n

ongeluk. Maak alle dele van die produk skoon

soos aangedui in die skoonmaakafdeling,

oordat u dit gebruik.

2.1. Gebruik of werksomgewing.

2.1.1. Hierdie toestel is slegs vir huishoudelike gebruik en vir die aangewese

doel ontwerp.

2.1.2. Moet nie die toestel buitenshuis gebruik nie (tensy dit spesifiek vir

buitengebruik ontwerp is).

2.1.3. Gebruik die toestel in ‘n goed geventileerde area.

2.1.4. Moet nie die toestel aan hitte, direkte sonlig of baie hoë vog blootstel nie (bv. Reën).

2.1.5. Moet nooit die toestel in vloeistowwe dompel nie en wees bewus van skerp kante wat

dit kan beskadig.

2.1.6. Moet die toestel nooit met nat of klam hande gebruik nie. Skakel onmiddellik af as dit nat

of klam word terwyl dit aan die gang is.

2.1.7. Hou kinders en omstanders weg wanneer u hierdie toestel gebruik.

2.1.8. Moet geen brandbare materiaal naby die toestel plaas nie.

2.1.9. Moet die toestel nie saam met ‘n programmeerder, tydschakelaar of ander toestel gebruik

wat dit outomaties inskakel nie.

2.1.10. Moet nie die toestel gebruik as dit beskadig is nie.

2.1.11. As een van die toestelseile breek, skakel die toestel onmiddellik af.

2.1.12. Moet nie die toestel gebruik as dit op die vloer val of as daar sigbare tekens van

skade is nie.

2.1.17. Moet nie die kragdraad forseer nie. Moet nooit die kragdraad gebruik om die toestel op

te lig, te dra of uit te trek (indien van toepassing).

2.1.18. Moet nie die kragdraad om die toestel draai nie (indien van toepassing).

2.1.19. Moet nie die kragdraad klem of vou nie (indien van toepassing).

2.1.20. Moet nie toelaat dat die kragdraad hang of in kontak kom met die warm oppervlaktes

van die toestel nie (indien van toepassing).

2.1.21. Kontrolleer die toestand van die kragdraad. Beskadigde of verwarde kabels verhoog die

risiko van elektriese skok (indien van toepassing).

2.1.22. Die toestel is nie geskik vir buitengebruik nie.

2.1.23. Die kragdraad moet gereeld nagegaan word vir tekens van skade, en as die koord

beskadig is, mag die toestel nie gebruik word nie (indien van toepassing).

2.1.24. Moet nie die prop met nat hande aanraak nie (indien van toepassing).

2.1.25. Verseker dat die kamer geventileer is terwyl die verwarmer in werking is. Moet nie in ‘n

slaapkamer, woonwa, boot of enige beperkte ruimtes bedryf word nie.

2.1.26. Moet nie die verwarmer naby mure, gordyne of meubels plaas terwyl dit in werking is

nie. Hou altyd die verwarmer na die middel van die kamer gedurende bedryf.

2.1.27. Moet nie voorwerpe op die verwarmer plaas nie.

2.1.28. Dit is ‘n laedruktoestel wat slegs met ‘n 2.8kPa SANS 1237-goedgekeurde regulator

gebruik moet word.

2.1.29. MOET NIE DIE TOESTEL WYSIG OF VERANDER NIE

2.2. Persoonlike veiligheid:

2.2.1. WAARSKUWING: Laat die toestel nie onbeheerd agter terwyl dit in gebruik is nie,

aangesien daar ‘n risiko van ‘n ongeluk is.

2.2.2. Moet nie die verhitte dele van die toestel aanraak nie, dit kan ernstige brandwonde

veroorsaak.

2.2.3. Hierdie toestel is slegs vir huishoudelike gebruik, nie vir industriële of professionele

gebruik nie. Dit is nie bedoel om deur gaste in gastehuise soos bed en ontbyt, hotelle, motels,

en ander tipes residensiële omgewings, selfs in plaashuise, areas van die kombuispersoneel in

winkels, kantore en ander werksomgewings, gebruik te word nie.

2.2.4. Hierdie toestel is nie bedoel vir gebruik deur persone (insluitend kinders) met vermin-

derde fisieke, sensoriese of geestelike vermoëns, of gebrek aan ervaring en kennis nie, tensy

hulle toesig of onderrig oor die gebruik van die toestel deur ‘n persoon wat verantwoordelik

is vir hul veiligheid

2.2.5. Hierdie toestel is nie ‘n speelding nie. Kinders moet onder toesig wees om te verseker dat

hulle nie met die toestel speel nie.

2.2.6. Dit is onwettig en gevaarlik om enige deel van hierdie toestel te verander.

2.3. Gebruik en sorg:

2.3.1. Rol die toestel se kragkabel volledig uit voor elke gebruik (indien van toepassing).

2.3.2. Moenie die toestel gebruik as die onderdele of bykomstighede nie behoorlik aangebring

is nie.

2.3.4. Moenie die toestel omdraai terwyl dit in gebruik is of aan die hoofkragtoevoer gekoppel

is nie (indien van toepassing).

2.3.5. Ontkoppel die toestel van die hoofkragtoevoer wanneer dit nie gebruik word nie en

voordat enige skoonmaaktaak onderneem word (indien van toepassing).

2.3.6. Hierdie toestel moet buite bereik van kinders gestoor word.

2.3.7. Moenie die toestel stoor as dit nog warm is nie.

2.3.8. Moet nooit die toestel sonder toesig laat wanneer dit gebruik word nie en hou buite

bereik van kinders.

2.3.9. Ontkoppel die toestel van die hooftoevoersok na gebruik en voor elke skoonmaak.

Trek die prop, nie die hoofkabel nie, om die toestel van die hoofstroom te ontkoppel (indien

van toepassing).

2.3.10. Indien die toestel om een of ander rede aan die brand sou raak, ontkoppel die toestel

van die hoofkragtoevoer en MOENIE WATER GEBRUIK OM DIE VUUR TE BLUS NIE.

2.3.11. Hierdie toestel moet getoets word vir lekkasies voor aanvanklike gebruik en wanneer

die silinder weer gekoppel is nadat dit gevul is. MOET NOOIT ‘N NAAKTE VLAM GEBRUIK OM

VIR LEKKASIES TE TOETS NIE.

LET WEL: Die verwarmer bevat verskeie veiligheidstoestelle wat die verwarmer in onveilige

toestande sal afskakel.

•ODS (suurstofuitputtingstelsel) In die geval van toevallige vlamonderbreking, sal die

gasverwarmer outomaties afskakel.

Die Tip Over Switch sal die verwarmer afskakel as dit nie regop op ‘n gelyk oppervlak staan nie.

As dit aktiveer, stel die verwarmer regop, kyk vir duidelike skade en wag weer 10-15 minute

voordat jy probeer om die verwarmer weer aan te steek. Hierdie toestel kan ook werk as die

verwarmer teen of gestamp word.

2.4. Diens:

2.4.1. Maak seker dat die toestel slegs deur toepaslik gekwalifiseerde tegnikus gediens word,

en dat slegs oorspronklike onderdele of bykomstighede gebruik word om bestaande onderdele/

bykomstighede te vervang.

2.4.2. Indien die kragkoord beskadig is, moet die vervaardiger of sy diensagent of ‘n soortgelyke

gekwalifiseerde persoon dit vervang om ‘n gevaar te vermy (indien van toepassing).

2.4.3. Enige misbruik of versuim om die gebruiksinstruksies te volg maak die waarborg en die

vervaardiger se aanspreeklikheid nietig.

3. Gebruiksaanwysings:

3.1. Voor gebruik:

3.1.1. Verwyder die toestel se beskermende film (indien van toepassing).

3.1.2. Rol die kragkabel af (indien van toepassing).

3.2. Gebruik en sorg:

3.2.1. Vergadering

1. Vir jou veiligheid, volg asseblief die monteerinstruksies stap vir stap soos hieronder verskaf.

Inhoud:

1 x Gevoude verwarmer, 1 x kruiskopskroewedraaier, 1 x sleutel

4 x gietwiele met wassers en moere, 8 x groot skroewe,

6 x Klein skroewe, 2 x Hoekmaatplate

Bopaneel1. Verwyder die verwarmer versigtig uit die verpakking en kyk

vir enige skade voor gebruik. Die skroewe, vasleginstrumente

en wieletjies is in die boks aan die agterkant.

2. Draai die linker- en regterkantpaneel uit na ‘n hoek van 90

grade en maak die onderste paneel oop.

3. Die linker- en regterkant paneel en die onderkant by ‘n

hoek van 90 grade.

4. Pas die posisie aan en maak die linker- en regterkant paneel

en onderkant paneel vas met die groter skroewe (ingesluit) op

die 4 punte wat in die diagram gewys is.

5. Maak die bopaneel van die verwarmer oop. Pas die posisie

aan en steek die meterskywe in die sleuwe van die bopaneel

eerste. Verseker hulle deur die groter skroewe (ingesluit) te

gebruik. Op die 4 punte soos in die diagram gewys.

6. Maak die bopaneel aan die voorkant paneel vas deur

die klein skroewe (ingesluit) te gebruik op die 2 punte

wat gewys is.

7. Volg die rigting van die pyltjies, maak die klein skroewe vas

om die agterpaneel te installeer en die ringe + moer (ingesluit)

om die wieletjies te installeer.

3.3. Waarskuwings en veiligheidsmaatreëls!

3.3.1. Moet nooit probeer aansteek as die slang los of op enige manier beskadig lyk nie.

3.3.2. Moet nie die ontstekingsknoppie vir langer as 40 sekondes indruk nie.

3.3.3. Moet nooit die regulator loskoppel terwyl die cilinderklep of regulator aan is nie.

3.3.4. Verander nie silinders in ‘n gebied waar daar ‘n oop vuur is nie.

3.3.5. Moet nie jou silinder aan buitengewone hitte blootstel nie.

3.3.6. Moet geen ander silinders in die kamer waarin jou verwarmer gebruik word, stoor nie.

3.3.7. Moet nie jou vinger of enige ander materiaal of voorwerp deur die beskermingsrooster van

die verwarmer steek nie, aangesien dit ernstige brandwonde of brand tot gevolg kan hê!

3.3.8. Laat ten minste 1 meter afstand tussen jou verwarmer en enige ander hittebron.

3.3.9. Moet nie ongemagtigde persone toelaat om met jou verwarmer te mors nie.

3.3.10. Moet die toestel nie onder elektriese stopkontakuitlaat gebruik nie.

3.3.11. Moet die verwarmer nie in badkamers, storte of swembaddens, ontspanningsvoertuie

soos karavane of motorhuise gebruik nie.

3.3.12. Hierdie verwarmer mag nie sonder ‘n gascilinder en regulator gebruik word vir

stabiliteitsdoeleindes nie.

3.3.13. Moet nie jou verwarmer bedek nie. Stowwe, klere, ophangings, netgordyne, beddegoed

en ander brandbare materiale kan ontbrand as dit teen die openinge van jou verwarmer

geplaas word.

3.3.14. In die geval van lekkasie moet die toestel onmiddellik afgeskakel word, óf by die gasblik-

klep óf by die regulator inskakelklep, en ontkoppel die regulator van die silinder.

3.3.15. Skakel die toestel af by die regulator inskakelklep en die regulator na gebruik, en

ontkoppel die silinder.

3.3.16. Gebruik slegs in goed geventileerde areas.

3.3.17. Die beskermrooster op hierdie toestel is daar om die risiko van brand of besering deur die

brander te voorkom, en geen deel daarvan moet permanent verwyder word nie. DIT BIED GEEN

BESKERMING VIR JONG KINDERS, TROETELDIERE OF DIE SIEKELIKE NIE.

3.3.18. Moet nie die toestel beweeg terwyl dit in werking is nie, omdat skokke en stote die

veiligheidsvoorziening mag aktiveer.

3.3.19. Brandgevaar bestaan as die verwarmer bedek of verkeerd geplaas word. Verseker altyd

dat hierdie verwarmer in die middel van die kamer geplaas word, weg van enige brandbare

voorwerpe of materiale.

3.3.20. Die brandwag van hierdie verwarmer is bedoel om direkte toegang tot verhittingselemente

te voorkom en moet in plek wees wanneer die verwarmer in gebruik is.

3.3.21. WAARSKUWING: Moet die verwarmer nie bedek om oorverhitting te voorkom nie.

3.3.22. Kinders en troeteldiere moet weggehou word van die verwarmer en voortdurend

toegesig word wanneer hulle naby die verwarmer is. Onderhoud moet geensins deur kinders

gedoen word nie.

3.4. Veiligheidsmaatreëls

Gebruik altyd die verwarmer volgens die instruksies wat saam met elke

verwarmer verskaf is. Berg die instruksies op ‘n veilige plek op.

MOET NIE klere of ander materiale op die verwarmer plaas nie. Dit kan ‘n

brandgevaar veroorsaak of die werking van die toestel beïnvloed.

MOET NIE die verwarmer naby meubels plaas nie.

MOET NIE die verwarmer van kamer na kamer skuif wanneer dit aangeskakel

is nie.

MOET NIE die verwarmer naby mure, meubels, netgordyne, bedlinne of enige

brandbare materiale plaas nie, aangesien dit ‘n brandgevaar kan veroorsaak. Die

volgende minimum afstande moet nagekom word: 50 cm van die kante af en 100

cm van die voorkant af. HOU ALTYD die verwarmer na die middel van die kamer

gerig. Die verwarmer moet te alle tye op ‘n vlak oppervlak geplaas word.

As ‘n lek vermoed word, MOET NIE die regulator loskoppel nie. Skakel die gas

toe by die gasreguleerder. Neem die toestel buite in ‘n vlamvrye atmosfeer.

Skakel die gas toe en toets al die verbindings. Kwassie stadig die verbindings

met seepwateroplossing of ‘n lekdetecteerspray, ‘n gaslek sal borrels vorm. As

‘n lek gevind word, skakel die gas af. MOET NIE die verwarmer weer gebruik

voordat dit deur ‘n bevoegde persoon nagegaan is in ooreenstemming met die

Gasveiligheidsinstallasie- en gebruikregulasies van 1998 nie.

Belangrik:

Lees asseblief die instruksies in hierdie handleiding sorgvuldig. Dit bevat belangrike inligting vir

beide bedryf en jou veiligheid.

• Moenie gebrekkige toestelle gebruik nie.

• Onderhoud en herstelwerk moet slegs deur ‘n gekwalifiseerde tegnikus uitgevoer word.

• Laat jou verwarmer jaarliks deur ‘n gekwalifiseerde tegnikus of gasingenieur nagaan vir veilige

bedryf en om enige foute op te spoor.

• Bewaar hierdie instruksies vir toekomstige verwysing.

3.5. Veiligheidsinligting

• Hierdie is ‘n sonderrook-verwarmer. Maak seker dat die kamer goed geventileer is terwyl die

verwarmer in werking is. Moet nie in ‘n slaapkamer, woonwa, boot, of enige kamer kleiner as 80

kubieke meter gebruik word nie. Hierdie verwarmer is nie geskik vir klein beperkte ruimtes nie.

• Moet nie die verwarmer naby mure, gordyne, brandbare voorwerpe/vloeistowwe of meubels

plaas terwyl dit in werking is nie, aangesien dit ‘n brandgevaar kan veroorsaak! Die verwarmer

moet altyd na die middel van die kamer gerig wees. Korrekte posisie aangedui as volg:

• Die verwarmer mag nie geskuif word terwyl dit in werking is nie.

• Moet op geen enkele tyd voorwerpe op of teen die verwarmer plaas nie.

HYBRID

GAS & ELECTRIC HEATER

1

Y

E

A

R

O

N

L

I

N

E

R

E

G

I

S

T

R

A

T

I

O

N

1

Y

E

A

R

R

E

T

A

I

L

W

A

R

R

A

N

T

Y

1

Y

E

A

R

C

O

M

M

U

N

I

C

A

T

I

O

N

O

P

T

-

I

N

terms & conditions applyterms & conditions apply

Model:

35430

4.2kW/1200W

complies with

INTERNATIONAL

IEC60335

SAFETY SPECIFICATIONS

Product specificaties