Maxwell MX-25108 Handleiding
Maxwell
Multimeter
MX-25108
Lees hieronder de 📖 handleiding in het Nederlandse voor Maxwell MX-25108 (16 pagina's) in de categorie Multimeter. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
U Mser anUal
anwendUngsinforation
Használati Utasítás
ManUal de Utilizare
Užívateľská prírUčka
digital multimeter
digital-multimeter
digitális multiméter
multimetru digital
digitálny multimeter
Product code / Produktcode / Termékkód / Cod produs / Kód produkta:
25108
DT700D
i
EN User Manual
g eneral cHaracteristics
This 3½ digit multimeter is perfect for
measuring DC and AC voltage, DC current,
resistance and diode. It also has a continuity
function and can be used as a logical tester. It is
ideal for work and home use as well.
t He front panel
1. Display
3½ digits, 7 segments, large LCD (27 × 60 mm)
2. Function and range switch
This switch selects the functions and the desired
range. It also turns the device on. To prolong
battery life set it to OFF when you are not using
the device.
3. “5A” banana (wire) connector
Connect the red (positive) measuring wire into
this connector to measure 10A current.
4. “VmA” banana connector
Connect the red measuring wire into this
connector to measure every kind of voltage,
resistance and current (except for 5A)
5. “COM” banana connector
Connect the black (negative) measuring wire
here.
t ecHnical data
DC voltage
Range Resolution Accuracy
200mV 100uV ±0.5% +3D
2000mV 1mV
±1.0% +5D20V 10mV
200V 100mV
300V 1V ±1.2% +5D
Overload protection
220V RMS AC at
200mV range, és
300V DC or 300V RMS
on every range
AC voltage
Range Resolution Accuracy
200V 100mV ±1.2% +10D
300V 1V
Reaction
Average, calibrated
on the RMS of the
sine wave
Frequency range 45Hz ~ 450Hz
Overload protection 300V DC or 300V RMS
on every range
Continuity test with audio signal
Range Description
A built-in beeper
signals if the
resistance is below
30±20Ω
Overload protection 15 seconds maximum
220V RMS
300300
5
300
300V~max
-
1
2
3
4
5
User Manual EN
DC current
Range Resolution Accuracy
2000μA 1μA ±1.8% +2D
20mA 10μA
200mA 100μA ±2% +2D
5A 10mA ±2% +10D
Overload protection 500mA 500V fuse (5A
500V)
Measuring voltage
fallback 200mV
Resistance
Range Resolution Accuracy
200Ω 100mΩ ±1.0% +10D
2000Ω 1Ω ±1.0% +2D
20KΩ 10Ω ±1.0% +2D
200KΩ 100Ω ±1.0% 2D
2000KΩ 1KΩ ±1.0% +2D
Max. open circuit
voltage 3.0V
Overload protection 15 seconds maximum
220V RMS
operation
WARNING
To avoid electric shock and damage to the
device do not measure voltage exceeding 300V!
Always verify the intactness and insulation of
the measuring wires, connectors and other units
before measuring!
DC and AC voltage measuring
connector and the black one to the “COM”
connector.
desired voltage position. If the voltage is
unknown, set the switch to the highest
available range, connect the wires to the
device and the circuit and reduce the range
until the value shown is correct.
DC current measuring
connector and the black one to the “COM”
connector. (For measuring current between
200mA and 5A connect the red wire into the
“5A” connector).
position
serially.
use only. The measuring wire should only be
connected to the circuit for the maximum
of 15 seconds and allow a few seconds in
between measurements.
Resistance measuring
connector and the black one to the “COM”
connector.
position.
Diode measuring
connector and the black one to the “COM”
connector.
” position.
of the measured diode and the black one to
the cathode.
Product specificaties
| Merk: | Maxwell |
| Categorie: | Multimeter |
| Model: | MX-25108 |
Heb je hulp nodig?
Als je hulp nodig hebt met Maxwell MX-25108 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multimeter Maxwell
18 Juni 2023
13 April 2023
16 Maart 2023
11 Maart 2023
19 Februari 2023
19 Januari 2023
13 Januari 2023
7 Januari 2023
18 November 2022
16 Oktober 2022
Handleiding Multimeter
- Multimeter Abus
- Multimeter Aldi
- Multimeter Alecto
- Multimeter Altai
- Multimeter Amiko
- Multimeter Amprobe
- Multimeter Appa
- Multimeter Basetech
- Multimeter Beha-Amprobe
- Multimeter Benning
- Multimeter Brandson
- Multimeter Brennenstuhl
- Multimeter Bruder Mannesmann
- Multimeter Elma
- Multimeter Elro
- Multimeter Extech
- Multimeter Ferm
- Multimeter Flir
- Multimeter Fluke
- Multimeter Gembird
- Multimeter Gossen Metrawatt
- Multimeter Greenlee
- Multimeter Hager
- Multimeter Hubinont
- Multimeter Ideal
- Multimeter Keithley
- Multimeter Kingcraft
- Multimeter Laserliner
- Multimeter Mastech
- Multimeter Megger
- Multimeter Metrel
- Multimeter Metrix
- Multimeter Micronta
- Multimeter Milwaukee
- Multimeter Monacor
- Multimeter Parkside
- Multimeter PCE Instruments
- Multimeter Perel
- Multimeter Plieger
- Multimeter Powerfix
- Multimeter Profile
- Multimeter Sanwa
- Multimeter Silverline
- Multimeter Skandia
- Multimeter Stanley
- Multimeter TFA
- Multimeter Topcraft
- Multimeter Uni-T
- Multimeter Velleman
- Multimeter Voltcraft
- Multimeter Wiha
- Multimeter Workzone
- Multimeter Joy-it
- Multimeter Jung
- Multimeter Clas Ohlson
- Multimeter Steren
- Multimeter Klein Tools
- Multimeter EMOS
- Multimeter Tacklife
- Multimeter Biltema
- Multimeter REV
- Multimeter Etekcity
- Multimeter Testo
- Multimeter Somogyi
- Multimeter Testboy
- Multimeter Yato
- Multimeter Wago
- Multimeter GW Instek
- Multimeter Kyoritsu
- Multimeter Owon
- Multimeter Projecta
- Multimeter Cablexpert
- Multimeter Högert
- Multimeter Multimetrix
- Multimeter Digi-tool
- Multimeter Kewtech
- Multimeter Sonel
- Multimeter Vimar
- Multimeter Strex
- Multimeter PeakTech
- Multimeter MBS
- Multimeter MGL Avionics
- Multimeter Rigol
- Multimeter Chauvin Arnoux
- Multimeter Aim TTi
- Multimeter CEM
- Multimeter Horex
- Multimeter Cosinus
- Multimeter Kurth Electronic
- Multimeter Weltron
- Multimeter Rohde & Schwarz
- Multimeter EEVBlog
- Multimeter Weidmüller
- Multimeter HT Instruments
- Multimeter Caltek
- Multimeter Elworks
- Multimeter Qian
Nieuwste handleidingen voor Multimeter
25 April 2024
17 April 2024
11 April 2024
8 April 2024
8 April 2024
8 April 2024
31 Maart 2024
19 Maart 2024
6 Maart 2024
6 Maart 2024