Makita 6706D Handleiding
Makita
Schroefmachine
6706D
Bekijk gratis de handleiding van Makita 6706D (14 pagina’s), behorend tot de categorie Schroefmachine. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 5.0 sterren uit 12 reviews. Heb je een vraag over Makita 6706D of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/14
GB
Cordless Angle Socket Driver Instruction Manual
F
Clé d’Angle sans fil Manuel d’instructions
D
Akku-Winkelschrauber Betriebsanleitung
I
Avvitatore angolare a batteria Istruzioni per l’uso
NL
Accu haakse moeraanzetter Gebruiksaanwijzing
E
Llave angular a batería Manual de instrucciones
P
Aparafusadora angular a bateria Manual de instruções
DK
Akku vinkelskruemaskine Brugsanvisning
S
Sladdlös vinkelmutterdragare Bruksanvisning
N
Akku vinkelmuttertrekker Bruksanvisning
SF
Akkukäyttöinen kulmahylsyväännin Käyttöohje
GR
Ασύρµατο βιδοτρύπανο γωνιακής υποδοχής
Οδηγίες χρήσεως
6704D
6706D
2
1 2
3 4
5 6
7
A
B
9
8
11
10
12
13
14
7
6
3
9.5 mm
or
6.35 mm
4
5
1
2
3
ENGLISH
Explanation of general view
1 Battery cartridge
2 Set plate
3 Hole for detent pin
4 Detent pin
5 Square drive
6 Bit with Form C 6.3 shank
7 Round drive
8 Switch trigger
9 Reversing switch
10 Clockwise rotation
11 Counterclockwise rotation
12 Number
13 Adjusting ring
14 Red mark
SPECIFICATIONS
Model 6704D 6706D
Capacities
Bolt, nut and machine screw .....................................................4 mm – 6 mm 4 mm – 6 mm
Square drive .............................................................................9.5 mm or 6.35 mm 9.5 mm or 6.35 mm
No load speed (min
-1
) ..................................................................400 400
Fastening torque ..........................................................................2.0 Nxm – 7.8 Nxm 2.0 Nxm – 7.8 Nxm
Overall length ..............................................................................396 mm 396 mm
Net weight ....................................................................................1.4 kg 1.4 kg
Rated voltage ..............................................................................D.C. 9.6 V D.C. 9.6 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
ENC004-1
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Always cover the battery terminals with the bat-
tery cover when the battery cartridge is not
used.
6. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
7. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
8. Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
9. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room tempera-
ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-
tery cartridge cool down before charging it.
4. Charge the Nickel Metal Hydride battery car-
tridge when you do not use it for more than six
months.
SPECIFIC SAFETY RULES
GEB017-1
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict
adherence to screwdriver safety rules. If you use
this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
2. Always be sure you have a firm footing. Be sure
no one is below when using the tool in high loca-
tions.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
Product specificaties
| Merk: | Makita |
| Categorie: | Schroefmachine |
| Model: | 6706D |
Heb je hulp nodig?
Als je hulp nodig hebt met Makita 6706D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schroefmachine Makita
25 Augustus 2025
25 Augustus 2025
25 Augustus 2025
15 Juli 2025
8 Juni 2025
25 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
Handleiding Schroefmachine
- Wiha
- SW-Stahl
- Easymaxx
- Vonroc
- Mac Tools
- Tacklife
- Porter-Cable
- Greenworks
- Bavaria By Einhell
- Hitachi
- Hazet
- Basetech
- Fein
- TAURUS Titanium
- Rodcraft
Nieuwste handleidingen voor Schroefmachine
8 September 2025
7 September 2025
7 September 2025
2 September 2025
2 September 2025
2 September 2025
2 September 2025
2 September 2025
1 September 2025
1 September 2025