Lasko W07350 Handleiding

Lasko Ventilator W07350

Lees hieronder de 📖 handleiding in het Nederlandse voor Lasko W07350 (4 pagina's) in de categorie Ventilator. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Rev. A 12/17 8 W07350ES
TWIN WINDOW FAN 7 inch
MODEL W07350
IMPORTANT INSTRUCTIONS - OPERATING MANUAL
Rev. A 12/17 1W07350ES
REPARACIONES: Para cualquier reparación, que no sea de mantenimiento general por parte del usuario, por favor contacte a nuestro
equipo de Servicio al Cliente al (800) 233-0268 de Lunes a Viernes de 8 a.m. a 5 p.m.
ALMACENAMIENTO: Almacene el Ventilador con estas instrucciones, en la caja original en un lugar fresco y seco.
DISPOSICIÓN: Los materiales de empaque de carn corrugado son reciclables. Para desechar este producto de manera
ecológicamente responsable, comuníquese con su proveedor de servicio de desechos local o visite www.1800recycling.com®.
MANTENIMIENTO Para reducir el riesgo de choque eléctrico e incendio, por favor obedezca las
siguientes instrucciones.
- Siempre desconecte el cable eléctrico antes de trasladar, reparar o limpiar.
- NUNCA coloque el Ventilador dentro de o cerca de agua.
- Limpie el Ventilador únicamente con una aspiradora equipada con un accesorio de cepillo; la aspiradora
quitará el polvillo y los desperdicios del interior del Ventilador.
- NUNCA intente desarma el Ventilador.
- Limpie el cuerpo del Ventilador únicamente con un trapo suave.
- NUNCA use ALCOHOL o SOLVENTES tales como gasolina, bencina, disolvente para pinturas u otros
limpiadores duros.
This Fan is for residential use only.
It is not intended to be used in commercial, industrial or agricultural settings.
SERVICIO AL CLIENTE:
Línea gratuita (800) 233-0268. Correo electrónico: producthelp@laskoproducts.com
Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de los centros
de reparación y repuestos. Se puede comunicar con nuestro equipo de Servicio al Cliente de lunes a viernes, de 8 a.m. a 5 p.m.
hora del Este. Por favor tenga disponible el número de modelo, así como también el tipo y estilo
(ubicados en la parte inferior de su producto).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Por favor no envíe el producto a esta dirección)
www.laskoproducts.com
El manual imprimió en la China
GARANTÍA LIMITADA DE LASKO PRODUCTS, LLC (VÁLIDO EN EE.UU., SUS TERRITORIOS, Y CANADÁ ÚNICAMENTE)
QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA: Esta garantía se extiende únicamente al comprador original del producto y dura un (1) año a partir de la fecha
original de compra o hasta que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ LASKO: Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser defectuosas o reemplazará el
producto completo por el mismo modelo u otro comparable. Para todas las reclamaciones de garantía, se debe devolver el producto a Lasko
Products, LLC a cargo del cliente con la prueba de compra dentro del período de garantía. Comuníquese con el departamento de atención al cliente
de Lasko para obtener una Autorización de Devolución (“RA”, por sus siglas en inglés). NO devuelva los productos sin una RA o no se procesará la
reclamación de la garantía.
QUÉ NO CUBRE ESTA GARANTÍA: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación
inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas. Esta garantía no cubre los costos de
envío para la devolución de productos a Lasko para su reparación o reemplazo. Lasko abonará los cargos de envío de devolución a Lasko con
posterioridad a las reparaciones o el reemplazo bajo garantía.
CUALESQUIERA Y TODAS LAS GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANTÍA IMPLÍCITA
DE COMERCIABILIDAD), DURAN UN AÑO A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL DEL
PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINGÚN
CASO LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA INCLUI(I) DAÑOS INCIDENTALES O POR
CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN DE CUALESQUIERA FUSIBLES HOGAREÑOS,
CORTA-CIRCUITOS O TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN NINGÚN CASO
LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL
PRODUCTO Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños
incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted
derechos legales específicos. Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia.
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,
INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD
RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
Have a Question? Need a Part?
Please Do Not Return Product to Store!
Contact Lasko Customer Service:
1-800-233-0268 Monday-Friday 8AM - 5PM EST.
Rev. A 12/17 2 W07350ES Rev. A 12/17 7 W07350ES
MODELO W07350
FUNCIONAMIENTO
1. Cuidadosamente retire el Ventilador de la bolsa plástica y la
caja.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
Cuando los enchufes quedan flojos en los
tomacorrientes, pueden deslizarse parcial o
completamente fuera del tomacorriente con un leve
movimiento del cable adosado. Los tomacorrientes
en este estado podrían sobrecalentarse y representar
un grave peligro de incendio; si está cubierto por una
cortina o tela, el riesgo de incendio es aún mayor.
2. Asegúrese que el interruptor de encendido se encuentre en la
posición de APAGADO.
3. Conecte a un tomacorriente de 120 voltios AC.
4. Deslice el interruptor de encendido hasta la velocidad deseada.
ALTA(2), BAJA(1)
ADVERTENCIA: ASEGÚRESE DE QUE EL VENTILADOR
ESTÉ APAGADO ANTES DE INVERTIR LA UNIDAD EN
LA VENTANA.
5. Cuando se invierte el ventilador en la ventana, éste sacará el
aire viciado en la habitación hacia el exterior.
INSTALACIÓN PARA VENTANA DE DOBLE
ABERTURA (Figura 1)
Recomendamos mantener la malla de la ventana en su lugar.
1. Centre el ventilador en la ventana, tire de los paneles expansibles
hacia afuera para hacerlos encajar con seguridad en el riel de
la ventana.
2. Baje la ventana y asegure detrás del sujetador de la ventana
encima del ventilador.
PARA VENTANAS VERTICALES CORREDIZAS
y VENTANAS DE MARCO GIRATORIO:
Recomendamos mantener la malla de la ventana en su lugar.
1. Coloque el ventilador en la ventana con el interruptor apuntando
hacia el centro de la abertura.
2. El ventilador debe encajar con seguridad contra el borde interno
de la abertura de la ventana.
3. Deslice la ventana corrediza hasta tocar el borde del ventana. El
borde lateral de la ventana debe encajar con seguridad detrás
del borde de la caja del ventilador.
4. Para ventanas de tamaño superior a 35" (889 mm), construya un
panel de madera contrachapada que encaje en el área abierta
y asegure el ventilador al marco de la ventana.
5. En ventanas con marco giratorio que tengan un ancho superior
a 12" (304,8 mm), será necesario construir una estructura de
madera contrachapada alrededor del ventilador y luego asegurar
la estructura al ventilador y al marco de la ventana.
Figura 1
Panel Expansible
de Ventana
Figura 2
INSTALACIÓN DE LAS PATAS (Figura 2 )
Cuando utilice el ventilador como un ventilador de piso o
mesa, coloque las dos (2) patas en su lugar al deslizarlas en la
parte inferior hasta que queden sujetadas.
ADVERTENCIA: Asegúrese de que las patas no estén
colocadas cuando utilice el ventilador en una ventana.
Vista del inferior del ventilador
Patas
parte trasera
del ventilador
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
Read all instructions before using this Fan.
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS
FOLLOW THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
use this fan to ventilate areas where flammable liquids or vapors are used, stored or are present, including paints, DO NOT
gasoline, varnishes, floor refinishing products or solvents. ALWAYS read and follow all warnings and instructions on the
containers for these products!
ALWAYS be sure the plug fits tightly into the outlet. When plugs fit loosely into outlets, they may slip partially out of the
outlet and create a poor connection. This may cause outlets to overheat and create a potential fire hazard. Outlets in this
condition should be replaced by a qualified electrician.
ALWAYS unplug the power cord when servicing, cleaning or moving the Fan. DO NOT use the ON/OFF switch as the sole
means of disconnecting power. NEVER leave children unattended when the Fan is on or plugged in. ALWAYS turn off and
unplug the Fan when not in use.
BE CERTAIN that the power source for the Fan is 120V AC. DO NOT plug the Fan into 240V or other power source.
The on your Lasko fan is a safety feature. It contains a non-replaceable safety device (fuse) that should not be Blue Plug™
removed or tampered with. To reduce the risk of fire, electric shock and personal injury, attempt to remove, replace, DO NOT
repair or tamper with the originally supplied plug. If the Fan has stopped functioning, it may be due to the safety device incor-
porated in this plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m. Eastern for questions. If the plug
warning label is missing or damaged, call the toll free number for a replacement label.
THIS FAN HAS A POLARIZED PLUG (one blade is wider than the other). This plug is designed to fit into the outlet only one
way. Match the wide blade to wide slot in outlet and FULLY INSERT. DO NOT attempt to bypass or defeat this safety feature.
If the plug does not fit in the outlet, consult a qualified electrician. The outlet may need to be replaced.
AVOID the use of extension cords, power strips, power taps, outlet style air fresheners or other cord connected device, as these
devices may overheat and cause a fire hazard.
route power cord under rugs, carpets, runners or furniture. This may damage the cord or cause it to overheat creating a fire DO NOT
hazard.
ALWAYS place the Fan on a stable, flat, level surface while in operation to prevent the Fan from overturning.
NEVER insert or allow fingers or objects to enter grill openings while Fan is in operation or injury and/or damage to the Fan may occur.
block, cover or obstruct air flow to or from the fan while in operation.DO NOT
use this Fan outdoors or near water or wet locations such as a bath tub, pool or hot tub. Use of this Fan in a wet location DO NOT
may create a shock hazard.
run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture DO NOT
or appliances. Arrange cord away from traffic area and where it will not be tripped over.
use a single extension cord to operate more than one Fan or other electrical device.NEVER
use this Fan if it has been damaged or is not functioning properly. DO NOT
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).This Fan is not suitable for use in agricultural
facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC) Article
547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for agricultural buildings.
THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).This Fan is not suitable for use in hazardous
locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards relating to electrical
requirements for hazardous locations.
WARNING
CAUTION
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICES.
Rev. A 12/17 6 W07350ES Rev. A 12/17 3 W07350ES
MODEL W07350
OPERATION
1. Carefully remove the Fan from the plastic bag and the
carton.
Be sure that the plug fits tightly into outlet.
When plugs fit loosely into receptacles, they may slip partially or
completely out of the receptacle with only the slight
movement of the attached cord. Receptacles in this
condition may overheat and pose a serious fire haz-
ard; if covered by a curtain or drape, the fire hazard
is even greater.
2. Make sure the Power Switch is in the OFF
position.
3. Plug into 120V AC outlet.
4. Rotate the Power Switch to desired speed (HIGH or LOW).
WARNING: MAKE CERTAIN FAN IS TURNED OFF BEFORE
REVERSING THE UNIT IN THE WINDOW.
5. When Fan is reversed in the window, it will remove the stale
air in the room to the outside.
INSTALLATION FOR DOU BLE HU NG
WINDOW (Figure 1)
We recommend keeping window screen in place.
1. Center Fan in window, pull out to securely fit Expander Panels
in window track.
2. Lower window and secure behind Window Grabber on top of
Fan.
FOR VERTICAL, SLIDER-TYPE WINDOWS,
and CASEMENT WINDOWS:
We recommend keeping window screen in place.
1. Position the Fan in the window with the Switch facing the
center of the opening.
2. Fan must fit securely against the inside edge of the window
opening.
3. Slide the expandable window panel to meet the edge of the
window. The side edge of the window must fit securely inside
the window grabber.
4. For windows larger than 35", build a plywood panel to fit the
open area and secure to Fan and window frame.
5. On casement windows wider than 12" it will be necessary to
build a plywood frame around Fan and then secure frame to Fan
and window frame.
Expandable
Window Panel
FEET INSTALLATION (Figure 2 )
When using Fan as Floor or Table Fan, lock the two (2) Feet
into place by sliding Feet onto bottom until the Feet snap in
place.
WARNING: Make sure Feet are not attached when using Fan
in a window.
Figure 2
View from Bottom of Fan
Feet
Back of Fan
Figure 1
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Cuando use este ventilador, se deben de seguir las siguientes advertencias y
precauciones para reducir el riesgo de incendio, descargas eléctricas y lesiones:
Lea todas las instrucciones antes de usar este Ventilador.
NO utilice este ventilador para ventilar las zonas donde se usen, almacenen o estén presentes líquidos o vapores inflam-
ables, incluidos pinturas, gasolina, barnices, disolventes o productos de acabado para pisos. ¡SIEMPRE lea y siga todas las
advertencias e instrucciones descritas en los envases de estos productos!
SIEMPRE asegúrese de que el enchufe encaje bien en el tomacorriente. Cuando los enchufes no encajan bien en el tomacor-
riente, pueden deslizarse un poco y crear una mala conexión. Esto puede causar que los tomacorrientes se sobrecalienten y
crear un riesgo de incendio potencial. Un electricista calificado debe cambiar los tomacorrientes que se encuentren en esta
condición.
SIEMPRE desenchufe el cable de corriente cuando realice mantenimiento, limpieza o mueva el ventilador. NO use el inter-
ruptor ENCENDIDO/APAGADO (ON/OFF) como el único medio para desconectar de la electricidad. NUNCA deje a los niños
sin supervisión cuando el ventilador esté encendido o conectado. apague y desenchufe el ventilador cuando no SIEMPRE
esté en uso.
ASEGURESE que la fuente de energía para el ventilador sea de 120V AC. NO enchufe el ventilador en una fuente de energía
de 240V ni en ninguna otra fuente de energía que no sea la indicada.
El en su ventilador Lasko es una característica de seguridad. Contiene un dispositivo de seguridad no remplaz-Blue Plug™
able (fusible) que no debe ser removido ni manipulado. Para reducir el riesgo de incendios, descargas eléctricas y lesiones,
NO remueva, remplace, repare ni manipule el enchufe suministrado originalmente. Si el ventilador no funciona adecuada-
mente, puede deberse al dispositivo de seguridad incorporado en este enchufe. Llame al 800-233-0268, de lunes - viernes,
entre las 8:00 am y 5:00 pm del Este para las preguntas. Si la etiqueta de advertencia de enchufe se encuentra o está dañado,
llame al número de teléfono gratuito para una etiqueta de reemplazo.
ESTE ARTEFACTO TIENE UN ENCHUFE POLARIZADO (una hoja del ventilador es más amplia que la otra). Este enchufe
está diseñado para encajar en el tomacorriente de una sola forma. Haga coincidir la patilla ancha del enchufe con la ranura
ancha del tomacorriente e INSÉRTELA COMPLETAMENTE. NO intente modificar o anular esta medida de seguridad. Si el
enchufe no encaja en el tomacorriente, consulte a un electricista calificado. El enchufe puede necesitar ser remplazado.
el uso de cables de extensión, enchufes múltiples, triples, ambientadores eléctricos u otro dispositivo conectado por cables, EVITE
ya que estos dispositivos pueden sobrecalentarse y causar un riesgo de incendio.
coloque los cables de alimentación debajo de alfombras, tapetes o muebles. Esto puede dañar el cable o causar que se NO
sobrecaliente y originar un riesgo de incendio
SIEMPRE colocar el ventilador en una superficie estable, plana y nivelada mientras esté funcionando para evitar que el ventilador se caiga.
inserte ni permita que introduzcan los dedos u objetos en las aberturas de la parrilla del ventilador mientras este esté en NUNCA
funcionamiento, p3-ya que el ventilador puede dañarse o malograrse.
bloquee, cubra ni obstruya el flujo de aire hacia o desde el ventilador mientras esté en funcionamiento.NO
utilice este ventilador al aire libre o cerca del agua o lugares húmedos como bañeras, piscinas o jacuzzis. El uso de este NO
ventilador en un lugar húmedo puede provocar una descarga eléctrica.
cubra el cable de corriente con tapetes, alfombras estrechas o artículos de coberturas similares. No coloque el cable de cor-NO
riente debajo de muebles o artefactos. Coloque el cable de corriente lejos del tráfico de la habitación, donde las personas no se
tropiecen con éste.
use un solo cable de extensión para hacer funcionar más de un ventilador u otro aparato eléctrico.NUNCA
use este ventilador si es que se p3-ha dañado o si no funcione adecuadamente. NO
Este ventilador no es ESTE VENTILADOR NO CUMPLE CON LOS REQUERIMIENTOS DEL ARTÍCULO 547-7 (2008) DEL NEC.
adecuado para su uso en instalaciones agrícolas, incluyendo las áreas donde el ganado, aves de corral u otros animales están
encerrados. Consulte el Artículo 547-7 (2008) del Código Eléctrico Nacional (NEC) o los códigos o normas locales o
estatales aplicables, relacionados con los requerimientos eléctricos para las instalaciones de agricultura.
ESTE ARTEFACTO NO CUMPLE CON LOS REQUISITOS DEL ARTÍCULO 500 DEL NATIONAL ELECTRICAL CODE (Código Eléc-
trico Nacional) 2008. Este ventilador no es adecuado para uso en lugares peligrosos. Consulte el Artículo 500 del Código Eléctrico
Nacional (NEC) o LOS CÓDIGOS O NORMAS LOCALES O ESTATALES APLICABLES, RELACIONADOS CON LOS REQUERIMIENTOS
ELÉCTRICOS PARA LOS SITIOS PELIGROSOS.
PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS ELÉCTRICAS SIEMPRE SIGA LAS
SIGUIENTES INSTRUCCIONES Y ADVERTENCIAS:
ADVERTENCIA
PRECAUCIÓN
ADVERTENCIA: DISMINUYA EL RIESGO DE INCENDIO O GOLPES DE ELECTRICIDAD NO USE ESTE VENTILADOR
CON ARTEFACTOS DE CONTROL DE VELOCIDAD EN ESTADO SÓLIDO.


Product specificaties

Merk: Lasko
Categorie: Ventilator
Model: W07350

Heb je hulp nodig?

Als je hulp nodig hebt met Lasko W07350 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Ventilator Lasko

Handleiding Ventilator

Nieuwste handleidingen voor Ventilator