Craftmade Inspo INS62FB3 Handleiding
Pagina's 10 Ventilator
Bekijk de handleiding van Craftmade Inspo INS62FB3 gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
PRINTED IN CHINA
READ THESE INSTRUCTIONS AND
AND SAVE THEM FOR FUTURE USE
Installation Guide
For Models:
INS54
INS62
Table of Contents:
Safety Tips. pg. 2
Unpacking Your Fan. pg. 3
Parts Inventory. pg. 3
Installation Preparation. pg. 4
Hanging Bracket Installation. pg. 4
Fan Assembly. pgs. 5 - 6
Wiring. pgs. 6 - 7
Canopy Assembly. pg. 7
Blade Assembly. pg. 8
Final Assembly. pg. 8
Wall Control Operation. pg. 9
Testing Your Fan. pg. 9
Troubleshooting. pg. 10
Warranty. pg. 10
Parts, Replacement or Technical
Assistance. pg. 10
net weight of fan: 17.86 lb (8.1 kg), INS54
19.07 lb (8.65 kg), INS62
Inspo
page 1
APPROVED FOR
INDOOR USE ONLY
Models:
INS54
INS62BNK3
APPROVED FOR
WET LOCATION ONLY
Models:
INS62FB3
INS62W3
page 2
SAFETY TIPS.
READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE
INSTRUCTIONS.
WARNING
• To reduce the risk of electrical shock, turn o the electricity to the fan at the main fuse box or circuit panel before you
begin the fan installation or before servicing the fan or installing accessories.
• To reduce the risk of re, electrical shock, or personal injury, mount to the outlet box marked "Acceptable for Fan Support
of 15.9 kg (35 lb) or less," and use the mounting screws provided with the outlet box. Most outlet boxes commonly used
for the support of lighting xtures are not acceptable for fan support and may need to be replaced. Consult a qualied
electrician if in doubt.
• To reduce the risk of re, electrical shock, or personal injury, wire connectors provided with this fan are designed to accept
only one 12 gauge house wire and two lead wires from the fan. If your house wire is larger than 12 gauge or there is more
than one house wire to connect to the corresponding fan lead wires, consult an electrician for the proper size wire
connectors to use.
• For Models INS62FB3 and INS62W3 only: If using this fan in a WET location, this fan must be connected to a supply circuit
that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electrical shock or
death.
• To reduce the risk of re or electrical shock, do not use this fan with any solid state speed control device or control fan
speed with a full range dimmer switch. [Using a full range dimmer switch to control fan speed will cause a loud humming
noise from fan.]
• To reduce the risk of personal injury or damage to the fan and other items, do not bend the blades during assembly or
after installation. Do not insert objects into the path of the blades.
• To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the fan, including the blades.
• To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
• This fan MUST be installed with the safety cable provided with the fan. Failure to use the safety cable provided may result
in personal injury, damage to the fan or damage to other property.
• To reduce the risk of personal injury, use only parts provided with this fan. The use of parts than those provided OTHER
with this fan will void the warranty.
CAUTION
• To avoid personal injury, the use of gloves may be necessary while handling fan parts with sharp edges.
1.Make sure all electrical connections comply with Local Codes or Ordinances, the National Electrical Code, and
ANSI/NFPA 70-1999. If you are unfamiliar with electrical wiring or if the house/building wires are dierent colors than
those referred to in the instructions, please use a qualied electrician.
2.Make sure you have a location selected for your fan that allows clear space for the blades to rotate, and at least seven
(7) feet (2.13 meters) of clearance between the oor and the fan blade tips. The fan should be mounted so that the tips
of the blades are at least thirty (30) inches (76 centimeters) from walls or other upright structures.
3.The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 35 pounds
(16 kilograms). The outlet box must be supported directly by the building structure. Use only CUL in Canada or UL in
USA listed outlet boxes marked "FOR FAN SUPPORT."
4.Electrical diagrams are for reference only.
5.After installation is complete, check that all connections are absolutely secure.
6.After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the
outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor
on opposite sides of the outlet box.
7.Do not operate the reverse switch until the fan has come to a complete stop.
8.Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
Distributed by: Craftmade, 3901 S. 20
th
Avenue, DFW Airport, TX, 75261; 1-800-486-4892
NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all possible
conditions and situations that may occur. It must be understood that common sense and caution are necessary factors in
the installation and operation of this fan.
page 3
1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to nish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
2. Parts Inventory.
a. canopy. 1 piece
b. downrod and hanging ball. 1 piece
c. hanging bracket. 1 piece
d. yoke cover. 1 piece
e. canopy cover. 1 piece
f. motor housing. 1 piece
g. wall control. 1 piece
h. plate. 1 piece
i. blade plate. 3 pieces
j. blade. 3 pieces
k. fitter plate. 1 piece
l. metal cover. 1 piece
m. weatherproof hanging ball cover. 1 piece*
n. hardware packs
*Included only with Models:
INS62FB3 and INS62W3
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
w/wall control
ab
d
e
c
f
k
n
l
j
g
h
i
m*
Product specificaties
| Merk: | Craftmade |
| Categorie: | Ventilator |
| Model: | Inspo INS62FB3 |
Heb je hulp nodig?
Als je hulp nodig hebt met Craftmade Inspo INS62FB3 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden