Lancom CS-8132F Handleiding
Lancom
Schakelaar
CS-8132F
Bekijk gratis de handleiding van Lancom CS-8132F (1 pagina’s), behorend tot de categorie Schakelaar. Deze gids werd als nuttig beoordeeld door 65 mensen en kreeg gemiddeld 4.0 sterren uit 33 reviews. Heb je een vraag over Lancom CS-8132F of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/1
Hardware Quick Reference
i
Before initial startup, please make sure to take notice of the information regarding
the intended use in the enclosed installation guide!
Operate the device only with a professionally installed power supply at a nearby
power socket that is freely accessible at all times.
All power plugs of the device must be freely accessible.
Please note that support for third-party accessories is not provided.
Mounting & connecting
LED description & technical details
Use an Ethernet cable to use this out-of-band service port
for an IP interface independent of the switching plane for
management tasks or connection to a monitoring server.
In particular, this port can be used as a VPC-keepalive link
(split-brain detection).
Connect a USB stick to the USB interface to store general
configuration scripts or debug data. You can also use this
interface to upload a new firmware.
Connect the configuration interface to the USB interface of
the device you want to use for configuring / monitoring the
switch using the serial configuration cable supplied.
10G SFP+ in-band management interface
(for future use)
Insert suitable LANCOM transceiver modules into the QSFP28 interfaces 1 to 32.
Choose cables which are compatible with the transceiver modules and connect them as
described in the transceiver modules mounting instructions:
lancom-systems.com/transceiver-modules-mi.
Use the enclosed grounding bracket with screw to secure the switch against ground.
To remove a fan module in case of defect, loosen the knurled screw of the module and
remove the module from the plug-in unit. To install a new fan module, push it into the
corresponding slot. Fasten the module to the switch housing with the knurled screw.
Please note that a defective fan should be replaced within 48h.
Supply the device with power via the power supply sockets of the power supply
modules. Use the supplied power cords or a country-specific LANCOM Power Cord.
To remove the power supply module, disconnect the module from the power supply and
then pull the plug out of the module. While pressing the release lever to the left, you
can pull the module out of the device by the handle .
FAN
2
FAN
1
FAN
0
CS-8132F
SYS
FAN
PSO
PS1
ID
MGMT
RESET SS
31 3229 3027 2825 2623 2421 2219 2017 1815 1613 1411 129 107 85 63 41 2
Left LED
Right LED
LANCOM CS-8132F
CS-8132F
SYS
FAN
PSO
PS1
ID
MGMT
RESE T
SS
15 1613 1411 129 107 85 63 41 2
FAN
0
Product specificaties
| Merk: | Lancom |
| Categorie: | Schakelaar |
| Model: | CS-8132F |
Heb je hulp nodig?
Als je hulp nodig hebt met Lancom CS-8132F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Schakelaar Lancom
4 April 2025
4 April 2025
4 April 2025
4 April 2025
10 Maart 2025
7 Oktober 2024
7 Oktober 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
Handleiding Schakelaar
- Ubiquiti Networks
- Fibaro
- PCE
- Comet
- Burg Wächter
- Mercusys
- Setti+
- Airlive
- Planet
- DoorBird
- KlikaanKlikuit
- Kaiser
- IFM
- Fantini Cosmi
- Intelix
Nieuwste handleidingen voor Schakelaar
3 Augustus 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025
29 Juli 2025