La Crosse Technology WT-5220U-IT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology WT-5220U-IT (6 pagina's) in de categorie Wekkerradio. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
WT- -5220U IT www.lacrossetechnology.com/support Page | 1
Model: - - WS 5220U IT
Instruction Manual
DC: 082415
Atomic Projection Alarm
with Indoor and Outdoor Temperature
Time, Alarm +
WWVB Icon
Indoor Temp.,
Outdoor Temp.
Buttons
TX37U IT -
Sensor
2 -AA
batteries
Battery
Compartment
3 AA batteries-
AC Power Jack
Projection
arm
SNOOZE button
WT- -5220U IT www.lacrossetechnology.com/support Page | 2
Get Started
Step 1: Insert 2 fresh AA, Alkaline batteries into the TX37U- IT
sensor according to polarity markings.
Step 2: Insert the 6 volt AC power cord into the wall, then into
the back of the alarm clock.
Step 3: Insert 3 fresh AA, Alkaline batteries into the projection
clock cording to polarity (optional). ac
Restart: If the outdoor temperature is not displayed after 3
minutes, remove batteries from the projection clock and
outdoor sensor. Press any button on the projection clock 20
times. After 15 minutes, return to above. Step 1
Set Time, Date, 12/24 Hour, Temperature Units
1. Hold the button to enter time set mode MODE/MIN
2. Press the button to confirm adjustments and SNOOZE
move to next item .
3. Press the button to adjust AL/HOUR or MODE/MIN
values.
Note:
ï‚· When setting time (hours and minutes flash together):
o Use the button to set the hour. AL/HOUR
o Use the button to set the minutes. MODE/MIN
ï‚· When setting the calendar (month and date flash together):
o Use the button to set the month AL/HOUR .
o Use the button to set the date MODE/MIN .
Setting order:
1. Time Zone
2. Hour & Minutes (together)
3. Year
4. Month/Date (together)
5. 12/24 Hour Format
6. Fahrenheit/Celsius
7. Daylight Saving Time ON/OFF
Press to exit, or wait 30 seconds without pressing SNOOZE
buttons to return to the normal time display.
WT- -5220U IT www.lacrossetechnology.com/support Page | 3
Set Alarm Time
1. Hold to enter set mode. AL/HOUR AL/HOUR
2. Press to adjust the hour and to AL/HOUR MODE/MIN
adjust the minutes.
3. Press to confirm adjustments and exit. SNOOZE
Setting order: 1. Hour, 2. Minutes
Press to exit, or wait 30 seconds without pressing SNOOZE
buttons to return to the normal time display.
Deactivate/Activate Alarm
ï‚· Press once to deactivate the alarm AL/HOUR .
ï‚· The alarm icon will disappear.
ï‚· Press once to activate the alarm AL/HOUR .
ï‚· The alarm icon will appear.
Snooze
ï‚· Press to silence an active alarm for 5 minutes. SNOOZE
ï‚· The alarm icon will flash.
ï‚· Press any button except snooze, to stop the alarm for 24
hours.
Projection (Brightness, Rotation)
When operating on AC power, the clock will project the time
and outdoor temperature, alternating every 5 seconds.
Note: The projection may be turned off but the alternating time
and temperature cannot be adjusted to just time or just
temperature projected.
Brightness Adjustment (AC power):
Press the (sun) button to change the projection: Brightness
ï‚· High
ï‚· Medium
ï‚· Low
ï‚· OFF
Rotate Projection:
Press the button to rotate the projected Projection Direction
image 90 degrees at a time.
Alarm
Icon
Brightness Projection
Direction


Product specificaties

Merk: La Crosse Technology
Categorie: Wekkerradio
Model: WT-5220U-IT

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology WT-5220U-IT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Wekkerradio La Crosse Technology

Handleiding Wekkerradio

Nieuwste handleidingen voor Wekkerradio